Three-axis load analysis of high-speed handpiece on dental training teeth and computer-aided design/computer-aided manufacturing blocks.

This study aimed to evaluate and compare the mechanical properties of dental training teeth with subtractive and additive computer-aided design/computer-aided manufacturing (CAD/CAM) materials used to fabricate dental simulation models. Therefore, the three-axis load generated during cutting movements, including drilling and milling performed using a dental handpiece, was measured and compared. The samples were cut vertically downward by 1.5 mm, horizontally by 6 mm, and vertically upward at a constant speed (1 mm/s), while the rotational speed of the bur was maintained at 200,000 rotations per minute. A three-axis load cell was used to measure the X-, Y-, and Z-axis loads on the specimen. The median value of the X-, Y-, and Z-axis measurements and the resultant load during the vertical-downward, horizontal, and vertical-upward movements were compared using a one-way analysis of variance and Tukey's post hoc test. For vertical downward movement, the drilling force of the dental training teeth was lower than that of Vita Enamic® and similar to that of Lava™ Ultimate. In contrast to subtractive CAD/CAM blocks, the drilling force of the dental training teeth was higher than that of 3D-printed resin blocks. Regarding horizontal movement, the milling force of dental training teeth was lower than that of Vita Enamic®. In contrast, the milling force of Nissin was similar to that of Lava™ Ultimate, while that of Frasaco was lower. Furthermore, compared to additive CAD/CAM blocks, the milling force of the dental training teeth was higher than that of 3D-printed resin blocks. Regarding vertical upward movement, the resultant loads of dental training teeth was lower than that of Vita Enamic®. Similarly, the resultant load of Nissin was similar to that of Lava™ Ultimate, while that of Frasaco was lower. Additionally, compared to additive CAD/CAM blocks, the resultant loads of the dental training teeth were similar to those of the 3D-printed resin blocks.

Influence of Post-Curing in Nitrogen-Saturated Condition on the Degree of Conversion and Color Stability of 3D-Printed Resin Crowns.

Post-curing is the process of applying extra light to complete the polymerization process of 3D printing. The mechanical properties of light-cured three-dimensional (3D) printed resin can be improved by decreasing the oxygen concentrations during post-curing, and nitrogen-saturated post-curing has been applied for this purpose. This study aimed to evaluate and compare the color stability of 3D-printed resin crowns that were post-cured in both normal air and nitrogen-saturated conditions. Crowns were fabricated with a 3D printer and post-cured in normal air (control group; air) or nitrogen-saturated conditions (experimental group; nitrogen). The specimens in each group were subdivided into four subgroups, each exposed to different discoloration agents: distilled water, coffee, wine, and curry. Post-immersion color changes were measured using a digital spectrophotometer and analyzed using repeated-measures ANOVA. Fourier transform infrared (FT-IR) spectroscopy evaluated the degree of conversion of resin over immersion times for both post-curing conditions. Upon comparing the effects of post-curing conditions, a significant difference between the control and experimental groups in terms of immersion time in the wine and curry subgroups was found. FT-IR analysis showed a significant difference in the degree of conversion between the air and nitrogen groups from 10 to 300 s. These findings suggest that nitrogen-saturated post-curing can potentially enhance the conversion rate of 3D-printed resin crowns, thereby improving their color stability.

Randomized clinical trial of pulpotomy using a premixed injectable calcium silicate cement on mature permanent teeth with reversible pulpitis.

The aim of this two-center randomized controlled trial was to assess the outcomes and relative factors associated with pulpotomies performed using a premixed injectable calcium silicate cement, as compared to mineral trioxide aggregate in mature permanent premolar and molar teeth with reversible pulpitis. Included teeth were randomly divided into two groups according to pulpotomy material (ProRoot MTA [PMTA] group, Endocem MTA Premixed [EPM] group). After pulp exposure, the superficial pulp was either removed to a depth of 2 mm (partial pulpotomy) or completely amputated to the level of the root canal orifice (full pulpotomy). A 3-mm layer of either material was randomly placed over the pulp wound, followed by the application of a thin layer of a light-cured glass ionomer composite liner. The restoration procedure was then carried out during the same visit. After one year of treatment, the pulpotomy success rate was 94.4% (67/71), with no significant difference between the PMTA and EPM groups. The success rate was 93.9% in the PMTA group and 97.1% in the EPM group. There were no significant factors related to the procedures. EPM is a viable alternative to PMTA for single-visit pulpotomies of permanent premolars and molars.

Biocompatibility and mineralization potential of new calcium silicate cements.

Background/purpose: As calcium silicate cements (CSCs) have been successfully used in various types of vital pulp therapy, many new CSC products have been developed. The aim of this study was to evaluate the biocompatibilities and mineralization potential of new CSC. The experimental materials were NeoMTA Plus and EndoSequence Root Repair Material-Fast Set Putty (ERRM-FS) which were compared to ProRoot MTA. Materials and methods: In vitro, the effects of the new CSC on stem cells were evaluated. Each CSC was prepared for cell viability testing, alkaline phosphatase (ALP) assay, and calcium ion release assay. In vivo, the exposed pulp model was used for the partial pulpotomy procedure. Thirty-six teeth were treated with three materials: ProRoot MTA, NeoMTA Plus, or ERRM-FS. After four weeks, the teeth were extracted and processed for histologic analysis. Dentin bridge formation, pulp inflammation, and odontoblastic cell layer were evaluated and the area of newly formed calcific barrier of each group was measured. Results: Three CSCs demonstrated similar cell viability on stem cells and the levels of ALP and calcium release were not significantly different between tested materials. ProRoot MTA and ERRM-FS showed better tissue healing process than NeoMTA Plus after partial pulpotomy, in terms of quality of calcific barrier and pulp inflammation. The outcomes from measuring newly formed calcific area demonstrated no significant differences between the materials. Conclusion: NeoMTA Plus and ERRM-FS displayed similar biocompatibilities and mineralization potential compared to ProRoot MTA. Therefore, these new CSCs can be used as desirable alternatives to ProRoot MTA.

Effect of Adhesion Conditions on the Shear Bond Strength of 3D Printing Resins after Thermocycling Used for Definitive Prosthesis.

Three-dimensional (3D) printing polymers such as urethane dimethacrylate (UDMA) and ethoxylated bisphenol A dimethacrylate (Bis-EMA) are typically used in definitive prosthesis and require surface treatments before bonding. However, surface treatment and adhesion conditions often affect long-term use. Herein, polymers were divided into Groups 1 and 2 for the UDMA and Bis-EMA components, respectively. The shear bond strength (SBS) between two types of 3D printing resins and resin cements was measured using Rely X Ultimate Cement and Rely X U200, according to adhesion conditions such as single bond universal (SBU) and airborne-particle abrasion (APA) treatments. Thermocycling was performed to evaluate the long-term stability. Sample surface changes were observed using a scanning electron microscope and surface roughness measuring instrument. The effect of interaction between the resin material and adhesion conditions on the SBS was analyzed via a two-way analysis of variance. The optimal adhesion condition for Group 1 was achieved when U200 was used after APA and SBU, whereas Group 2 was not significantly affected by the adhesion conditions. After thermocycling, the SBS significantly decreased in Group 1 without APA treatment and in the entire Group 2. Additionally, porosity, along with increased roughness, was observed on both material surfaces after APA.

Novel 3D Printed Resin Crowns for Primary Molars: In Vitro Study of Fracture Resistance, Biaxial Flexural Strength, and Dynamic Mechanical Analysis.

This study evaluated the fracture resistance, biaxial flexural strength (BFS), and dynamic mechanical analysis (DMA) of three-dimensional (3D) printing resins for the esthetic restoration of primary molars. Two 3D printing resins, Graphy (GP) and NextDent (NXT), and a prefabricated zirconia crown, NuSmile (NS), were tested. GP and NXT samples were 3D printed using the workflow recommended by each manufacturer. Data were collected and statistically analyzed. As a result of the fracture resistance test of 0.7-mm-thick 3D printed resin crowns with a thickness similar to that of the NS crown, there was no statistically significant difference among GP (1491.6 ± 394.6 N), NXT (1634.4 ± 289.3 N), and NS (1622.8 ± 323.9 N). The BFS of GP was higher for all thicknesses than that of NXT. Both resins showed high survival probabilities (more than 90%) when subjected to 50 and 150 MPa. Through DMA, the glass transition temperatures of GP and NXT were above 120 °C and the rheological behavior of GP and NXT according to temperature and frequency were analyzed. In conclusion, GP and NXT showed optimum strength to withstand bite forces in children, and 3D printed resin crowns could be an acceptable option for fixed prostheses of primary teeth.

Assessment of Real-Time Active Noise Control Devices in Dental Treatment Conditions.

Dental clinics are exposed to various uncomfortable noises. The aim of this study was to quantify the effectiveness of active noise control devices in dental treatment conditions. Two types of commercial headsets (Airpods Pro, QC30) and two types of dental headsets (Alltalk, Quieton Dental) were used for the experiment. Three sounds (high-speed handpiece, low-speed handpiece, and suction system) were measured at three different distances from the dental teeth model, typodont. The distances of 10, 40, and 70 cm reflected the positions of the patient, assistant, and practitioner's ears, respectively. Sound analysis was performed, and the significance of differences in the maximum noise level using each device was determined with the Kruskal−Wallis test. Dental noise was characterized by the peak in sound pressure level (SPL) at 4−5 kHz and >15 kHz frequencies. The commercial headsets efficiently blocked 1 kHz and 10 kHz of noise. The dental headsets efficiently reduced 4−6 and >15 kHz noise. Quieton had the highest maximum SPL in all situations and positions among the four devices. For a better dental clinic, however, active noise control devices more suitable for the characteristics of dental noise should be developed.

Comparative study of pulpal responses to ProRoot MTA, Vitapex, and Metapex in canine teeth.

BACKGROUND/PURPOSE: ProRoot MTA, Vitapex, and Metapex are widely used for pulp treatment of primary tooth. The aim of this study was to compare the pulpal responses to ProRoot MTA, Vitapex, and Metapex in a canine model of pulpotomy. MATERIALS AND METHODS: Pulpotomy procedure was performed to 34 teeth (21 incisors and 13 premolars) and ProRoot MTA, Vitapex or Metapex was applicated to artificially exposed pulp tissues. After 13 weeks, the teeth were extracted and processed with hematoxylin-eosin staining for histologic evaluation. All specimens were evaluated in several categorys related to calcific barrier, inflammatory responses and the area of calcific barrier formation was measured. RESULTS: Most of the specimens in the ProRoot MTA group developed a calcific barrier at the pulp amputation site and showed a low level of inflammatory response. However, in comparison to ProRoot MTA group, a small amount of calcific barrier formed in Vitapex and Metapex groups. CONCLUSION: This in vivo study found that Vitapex and Metapex induced similar pulpal responses but showed poor outcomes compared with using ProRoot MTA. Vitapex and Metapex are therefore not good substitutes for ProRoot MTA in direct pulp capping and pulpotomy.

Deep learning for early dental caries detection in bitewing radiographs.

The early detection of initial dental caries enables preventive treatment, and bitewing radiography is a good diagnostic tool for posterior initial caries. In medical imaging, the utilization of deep learning with convolutional neural networks (CNNs) to process various types of images has been actively researched, with promising performance. In this study, we developed a CNN model using a U-shaped deep CNN (U-Net) for caries detection on bitewing radiographs and investigated whether this model can improve clinicians' performance. The research complied with relevant ethical regulations. In total, 304 bitewing radiographs were used to train the CNN model and 50 radiographs for performance evaluation. The diagnostic performance of the CNN model on the total test dataset was as follows: precision, 63.29%; recall, 65.02%; and F1-score, 64.14%, showing quite accurate performance. When three dentists detected caries using the results of the CNN model as reference data, the overall diagnostic performance of all three clinicians significantly improved, as shown by an increased sensitivity ratio (D1, 85.34%; D1', 92.15%; D2, 85.86%; D2', 93.72%; D3, 69.11%; D3', 79.06%; p < 0.05). These increases were especially significant (p < 0.05) in the initial and moderate caries subgroups. The deep learning model may help clinicians to diagnose dental caries more accurately.

Push-Out Bond Strength Evaluation of Fiber-Reinforced Composite Resin Post Cemented with Self-Adhesive Resin Cement Using Different Adhesive Bonding Systems.

The purpose of this in vitro study was to evaluate the push-out bond strength of fiber-reinforced resin posts using self-adhesive cements with different adhesive systems. A total of 50 single-rooted human maxillary premolars with fully developed apices and 15-16 mm straight root canals were selected. The teeth were divided into 10 groups with coronal and apical parts according to the adhesive bonding system and luting material used: one universal adhesive with MDP-containing self-adhesive resin cement; another universal adhesive with MDP-containing self-adhesive resin cement; universal primer with MDP-containing self-adhesive resin cement; universal primer with dual-cure resin cement; MDP-containing self-adhesive resin cement only (Control). Each specimen was subjected to a fatigue load of 600,000 cycles using a chewing simulator with sliding movement and cut horizontally for push-out bond strength testing. Statistical evaluation consisted of a one-way ANOVA test using SPSS v23.0. The highest bond strength (7.05 MPa) was obtained in the coronal part of the Single Bond universal group treated with MDP-containing self-adhesive resin cement and the lowest strength (4.77 MPa) was observed in apical part of MDP-containing self-adhesive resin cement group (Control). However, the one-way ANOVA results showed no significant difference between all 10 groups (p > 0.05). The self-adhesive cement without adhesive bonding showed no statistically different value compared to self-adhesive cements with adhesive bonding.

Access opening guide produced using a 3D printer (AOG-3DP) as an effective tool in difficult cases for dental students.

OBJECTIVES: The aim of this study was to determine the effectiveness of using an access opening guide in teaching ideal access opening shape and preventing excessive tooth loss, with a focus on predoctoral dental students. METHODS: Ninety teeth that were mounted in a box just below the level of the cementoenamel junction using tray resin were randomly divided into two study groups. An access opening guide produced using a 3D printer (AOG-3DP) was designed using cone-beam computed tomography (CBCT). The AOG-3DP was applied in the test groups, while no aid was used in the control group. Access preparations in both groups performed by predoctoral dental students were scanned using CBCT to detect overpreparation. The preparation time and access cavity volume were evaluated. RESULTS: The mean times required for achieving access opening were 327.2 and 97.4 s in the control and AOG-3DP groups, respectively, for premolars, and 547.4 and 104.5 s for molars. The mean volumes for premolars and molars differed from the ideal cavities by 38.1 and 72.2 mm3 , respectively, in the control group, and by -2.0 and -8.7 mm3 the AOG-3DP group. CONCLUSIONS: Using the AOG-3DP significantly reduced the access opening time for premolars and molars. However, there is a limitation in that CBCT DICOM images must be converted to stereolithographic .stl files in order to be printed via 3D technology. This requires additional preclinical treatment time for imaging and subsequent printing. It could be considered that this can be a useful method in difficult cases.

Low-intensity pulsed ultrasound attenuates replacement root resorption of avulsed teeth stored in dry condition in dogs.

This study aimed to investigate the effects of low-intensity pulsed ultrasound (LIPUS) on replacement root resorption after replantation of avulsed teeth stored in a dry condition in dogs. A total of 73 premolar roots from four male mongrel dogs were intentionally avulsed with forceps and divided into four groups-HN, HL, DN, and DL-according to storage conditions and whether or not they received LIPUS treatment. Thirty-eight roots were kept in Hanks' Balanced Salt Solution for 30 min (HN and HL groups), whereas the remaining 35 roots were left to dry in the air for an hour (DN and DL groups) prior to replantation. Following replantation, the roots in the HL and DL groups (21 and 18 roots, respectively) received a 20-min daily LIPUS treatment for 2 weeks. The animals were euthanized 4 weeks after the operation. Micro-computed tomography images were acquired for each root and the amount of replacement root resorption was measured three-dimensionally. Histological assessments were also carried out. There was significantly less replacement root resorption for the roots in the DL group compared to the DN group (p < 0.01). Histological findings in the DN group demonstrated evident replacement root resorption, whereas the DL group revealed less severe resorption compared to the DN group. Within the limitations, these results suggest that LIPUS could attenuate the replacement resorption of avulsed teeth stored in a dry condition, thereby improving their prognosis.

Dental and Dental Hygiene Students' Knowledge and Perception on Fluoride Use in Dentistry.

AIM: The 75th anniversary of community water fluoridation in the United States was celebrated in 2020. However, there are studies that stimulate polarized discussion over the use of fluoride in dentistry. The purpose of this study was to evaluate dental and dental hygiene students' knowledge and perception of fluoride use in dentistry. MATERIALS AND METHODS: A survey was conducted to gauge participant's knowledge and perception of fluoride and their opinion on the need for developing viable alternatives to fluoride. An Institutional Review Board (IRB# 5190496) application was filed and approved. A hard copy survey was distributed to all student classes at Loma Linda University School of Dentistry (U.S.) between January 13, 2020, and February 5, 2020. Descriptive data were compiled and analyzed. Knowledge-based questions were compared using Kruskal-Wallis procedure to evaluate correct percentage among different classes. Perception questions were analyzed using a Likert scale and also a Chi-squared test. All tests were two-sided with α at 0.05. RESULTS: Out of 482 students, 282 students responded (58.5%). The mean of correct responses for knowledge ranged from 49 to 69%. There was a statistically significant difference among the classes. Overall the perception of the use of fluoride in dentistry was positive, and it changed with exposure to lectures on fluoride over the years. CONCLUSION: There was a correlation between knowledge and the perception of the use of fluoride in dentistry, indicating the importance of adequate delivery of didactic teaching on knowledge of fluoride to dental and dental hygiene students. CLINICAL SIGNIFICANCE: The oral healthcare provider plays a pivotal role in communicating pertinent information on the benefits of fluoride in preventing dental caries to the general public, prompting adequate delivery of didactic teaching on this topic in dental education.

Intranuclear Delivery of Nuclear Factor-Kappa B p65 in a Rat Model of Tooth Replantation.

After avulsion and replantation, teeth are at risk of bone and root resorption. The present study aimed to demonstrate that the intra-nuclear transducible form of transcription modulation domain of p65 (nt-p65-TMD) can suppress osteoclast differentiation in vitro, and reduce bone resorption in a rat model of tooth replantation. Cell viability and nitric oxide release were evaluated in RAW264.7 cells using CCK-8 assay and Griess reaction kit. Osteoclast differentiation was evaluated using quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) and tartrate-resistant acid phosphatase (TRAP) staining. Thirty-two maxillary rat molars were extracted and stored in saline (n = 10) or 10 µM nt-p65-TMD solution (n = 22) before replantation. After 4 weeks, specimens were scored according to the inflammatory pattern using micro-computed tomography (CT) imaging and histological analyses. nt-p65-TMD treatment resulted in significant reduction of nitric oxide release and osteoclast differentiation as studied using PCR and TRAP staining. Further, micro-CT analysis revealed a significant decrease in bone resorption in the nt-p65-TMD treatment group (p < 0.05). Histological analysis of nt-p65-TMD treatment group showed that not only bone and root resorption, but also inflammation of the periodontal ligament and epithelial insertion was significantly reduced. These findings suggest that nt-p65-TMD has the unique capabilities of regulating bone remodeling after tooth replantation.

Color and Translucency Stability of Three-Dimensional Printable Dental Materials for Crown and Bridge Restorations.

The purpose of this study was to examine and compare color and translucency stability of three-dimensional (3D) printable dental materials for crown and bridge restorations. Five different materials were investigated, and twelve disc-shaped specimens of two different thicknesses (1 and 2 mm) were prepared using a digital light processing 3D printer. Color measurements were made according to the CIELAB color scale (L*, a*, and b*) using a spectrophotometer 1 h, 1 day, 1 week, one month, and six months after post-curing of the materials, and the translucency parameter (TP) was calculated. The L*, a*, b*, and TP values were compared among the different materials and storage periods using repeated measures analysis of variance. Color and translucency changes of the specimens after the different storage periods were compared with 1 h measurements to determine whether they exceeded clinically perceivable thresholds. The L*, a*, b*, and TP values showed significant differences according to the storage periods, as well as among the materials. Until one month, some materials demonstrated distinct color differences, while others showed small color differences below a clinically perceivable threshold. The translucency differences were not clinically perceivable for any specimen. After six months, all specimens demonstrated large color changes, whereas the changes in translucency were relatively small. In conclusion, the color of 3D printable dental materials changed with time, and the differences varied with the materials used. On the contrary, the changes in translucency were small. Overall, the materials became darker, more yellowish, and more opaque after six months of water storage.

The Role of Hydraulic Silicate Cements on Long-Term Properties and Biocompatibility of Partial Pulpotomy in Permanent Teeth.

The use of hydraulic silicate cements (HSCs) for vital pulp therapy has been found to release calcium and hydroxyl ions promoting pulp tissue healing and mineralized tissue formation. The present study investigated whether HSCs such as mineral trioxide aggregate (MTA) affect their biological and antimicrobial properties when used as long-term pulp protection materials. The effect of variables on treatment outcomes of three HSCs (ProRoot MTA, OrthoMTA, and RetroMTA) was evaluated clinically and radiographically over a 48-78 month follow-up period. Survival analysis was performed using Kaplan-Meier survival curves. Fisher's exact test and Cox regression analysis were used to determine hazard ratios of clinical variables. The overall success rate of MTA partial pulpotomy was 89.3%; Cumulative success rates of the three HSCs were not statistically different when analyzed by Cox proportional hazard regression analysis. None of the investigated clinical variables affected success rates significantly. These HSCs showed favorable biocompatibility and antimicrobial properties in partial pulpotomy of permanent teeth in long-term follow-up, with no statistical differences between clinical factors.

In Vivo Evaluation of Decellularized Human Tooth Scaffold for Dental Tissue Regeneration.

Conventional root canal treatment may result in loss of tooth vitality, which can lead to unfavorable treatment outcomes. Notably, a ceased tooth development of immature permanent teeth with open apices, regeneration of periodontal ligaments (PDL), and pulp is highly expected healing process. For regeneration, the scaffold is one of the critical components that carry biological benefits. Therefore, this study evaluated a decellularized human tooth as a scaffold for the PDL and pulp tissue regeneration. A tooth scaffold was fabricated using an effective decellularization method as reported in previous studies. PDL stem cells (PDLSCs) and dental pulp stem cells (DPSCs) obtained from human permanent teeth were inoculated onto decellularized scaffolds, then cultured to transplant into immunosuppressed mouse. After 9 weeks, PDLSCs and DPSCs that were inoculated onto decellularized tooth scaffolds and cultured in an in vivo demonstrated successful differentiation. In PDLSCs, a regeneration of the cementum/PDL complex could be expected. In DPSCs, the expression of genes related to revascularization and the hard tissue regeneration showed the possibility of pulp regeneration. This study suggested that the potential possible application of decellularized human tooth could be a scaffold in regeneration PDL and pulp tissue along with PDLSCs and DPSCs, respectively, as a novel treatment method.

Effect of tooth-brushing with a microcurrent on dentinal tubule occlusion.

The purpose of this study was to investigate whether tooth-brushing with a microcurrent was effective in inducing dentinal tubule occlusion. The specific aims of the study were (1) to evaluate the effectiveness of tooth-brushing with a microcurrent on dentinal tubule occlusion by using scanning electron microscopy (SEM); and (2) to compare the dentinal fluid flow rate after tooth-brushing with a microcurrent by using a sub-nanoliter-scaled fluid flow measuring device (NFMD). All experimental groups showed partially occluded dentinal tubules and crystal-like structures at a specific microcurrent intensity indicated that tooth-brushing with a microcurrent could efficiently occlude dentinal tubules. The decrease in dentinal fluid flow rate in the tooth-brushing with microcurrents group indicated that dentinal tubules were occluded and the flow of dentinal fluid had decreased.

Effect of Low-Concentration Hydrofluoric Acid Etching on Shear Bond Strength and Biaxial Flexural Strength after Thermocycling.

This study evaluated the shear bond strength (SBS) and biaxial flexural strength (BFS) of resin cements according to the surface treatment method using low-temperature hot etching with hydrofluoric acid (HF) on a yttrium-stabilized tetragonal zirconia (Y-TZP) surface; 96 discs and 72 cubes for BFS and SBS tests for Y-TZP were randomly divided into four groups of BFS and three groups of SBS. Specimens were subjected to the following surface treatments: (1) no treatment (C), (2) air abrasion with 50 µm Al2O3 particles (A), (3) hot etching with HF at 100 °C for 10 min (E), and (4) air abrasion + hot etching (AE). After treatments, the specimens were coated with primer, and resin cement was applied with molds. The specimens were evaluated for roughness (Ra) via scanning electron microscopy and x-ray diffraction, and the data were analyzed by an analysis of variance (ANOVA) and Kruskal-Wallis tests. Group E produced significantly higher SBS compared to group A and AE before and after thermocycling. The BFSs of all groups showed no significant differences before thermocycling; however, after thermocycling, C and E treatment groups were significantly higher compared to group A and AE. All groups showed phase transformation. Group E was observed lower monoclinic phase transformation compared to other groups.

Topographic Analysis of the Isthmus in Mesiobuccal and Mesial Roots of First Molars in a South Korean Population.

The purpose of this study was to evaluate the incidence and microscopic anatomy of the isthmus to provide more precise anatomical information about the mesiobuccal (MB) roots of the maxillary first molars and the mesial (M) roots of the mandibular first molars. Twenty-eight maxillary and 31 mandibular first molars were embedded, sectioned, stained, and observed at 30× magnification to evaluate the incidence and microscopic anatomy of the isthmus. The incidence of an isthmus 3 mm from the apex was 89.3% and 100% in the MB roots of the maxillary first molars and in the M roots of the mandibular first molars, respectively. The mean dentin thickness between the isthmus and the distal root surface was <1 mm at a distance of 3 mm from the apex in both types of roots. In this study, whenever two main canals were located in the MB roots of the maxillary first molars and in the M roots of the mandibular first molars, the likelihood of the presence of an isthmus increased. Therefore, clinicians should be aware of the thinnest dimensions in the distal surface of the MB roots of the maxillary first molars and the M roots of the mandibular first molars during nonsurgical and surgical root canal treatment.