RESUMO
We report on the progress in the development of linear polarization-variable multi-electrode emitters for terahertz time-domain spectroscopy. The results on its microfabrication, the finite element method modeling of appropriate bias distribution between electrodes, the finite-difference time-domain simulated spectral output, and actual experimental testing are presented. The rotation of the emitted terahertz field with linear polarization on an angle multiple of 45° can be achieved by synchronized bias and single polarizer rotations.
RESUMO
By using optical sampling with repetition frequency modulation of pump/probe laser pulses on photoconductive emitter/detector antennas, the high-speed time/frequency domain gigahertz imaging is reported due to the absence of opto-mechanical delay line in this optical scheme. The clear contrast for a 3-cm wide metal plate, which was placed behind a 5-cm thick concrete block, was observed with a 1 × 1 mm image pixilation. On average, it took only ~0.75 s per pixel/waveform acquisition/assignment with a 675 ps time-domain window. This could become a valuable non-destructive evaluation technique in gigahertz spectral range with all benefits of time-domain spectroscopy.
RESUMO
While terahertz time domain spectroscopy (THz-TDS) is a well-established technique, polarization sensitive measurements are challenging due to the need of broadband polarization devices. Here, we characterize our recently introduced multi-contact photoconductive detector antenna with a response matrix analysis. We show that the lead lines attached to electrodes reduce the antenna symmetry and thereby influence the properties of the response matrices. With a wire grid polarizer, we simulate a sample influencing the polarization angle and the intensity of the incident THz pulse. Evaluating the measurements with the response matrix analysis, our results show a well agreement of the adjusted and measured polarization angles and intensities over a frequency range from 0.25 to 0.8 THz.
RESUMO
Using a FeCoSiB amorphous wire and a coil wrapped around it, we have developed a sensitive magnetic sensor. When a 5 mm long amorphous wire with the diameter of 0.1 mm was used, the magnetic field noise spectrum of the sensor was about 30 pT/ÖHz above 30 Hz. To show the sensitivity and the spatial resolution, the magnetic field of a thousand Japanese yen was scanned with the magnetic sensor.
RESUMO
A light polarization angle-sensitive photoconductive detector for terahertz time-domain spectroscopy is computer-modeled, microfabricated, and tested. The experimental results show good agreement with the linear angular response for an ideal detector. The detector's frequency, angular, and crosstalk responses are discussed in the context of theoretical and experimental considerations.
RESUMO
The array of pointed-shape apertures microfabricated in thin-film aluminum on a thick silicon substrate was designed to maximize the transmission efficiency at desired frequency. The resulted characteristics were over 100% optical transmission (relative to substrate) at narrow band-pass resonance and polarization-independent transmission strength and band-pass shape on filter rotation angle.