Adsorption Mechanism of Amidoxime Collector on the Flotation of Lepidolite: Experiment and DFT Calculation.

Lepidolite is an important mineral resource of lithium. With the increase in awareness of low-carbon and green travel, the demand for lithium has increased dramatically. Therefore, how to increase the output of lithium has to turn into high precedence. In this paper, amidoxime (DPA) was synthesized and used for the efficient collection of lepidolite. Dodecylamine (DA), a commonly used collector of lepidolite ore, was used for comparison. The collecting performances of DA and DPA for lepidolite were studied by the micro-flotation experiment, and the adsorption mechanism of DPA on lepidolite was verified by contact angle, zeta potential tests, FTIR spectra, and density functional theory (DFT) calculations. The results of flotation experiments showed that at the same collector dosage (3 × 10-4 mol/L), the recovery of lepidolite could reach 90%, while the recovery of lepidolite with DA was only 52.5%, and to achieve the maximum recovery of DA (77.5%), only half of the DPA was added. The contact angle test results showed that DPA could effectively improve the hydrophobicity of lepidolite than DA. FTIR spectra and zeta potential tests suggested that DPA molecules were adsorbed on the lepidolite surface by electrostatic attraction. DFT calculations revealed that DPA reacted with the nucleophilic reagent (lepidolite) by the reactive site of the -CH2NH(CH2)2C(NOH)N+H3 group and more easily absorbed on the surface of lepidolite than DA. Therefore, our new finding will provide an important prospect for the sustainable development and utilization of lithium resources.

Iron ore production using a new Gemini surfactant at 273 K.

Herein we present the use of a Gemini surfactant and reverse froth flotation to efficiently separate magnetite from quartz and produce iron ore at 273 K. This surfactant achieved an obviously superior flotation performance (TFe recovery increased by 48.18%), and the dosage of the Gemini surfactant was three times less than that of a conventional monomeric surfactant. Our findings are expected to serve as a general guide to design a new and excellent collector for high-efficiency mineral flotation and to lead to an efficient and clean development of mineral resources.

Adsorption of Trisiloxane Surfactant for Selective Flotation of Scheelite from Calcite at Room Temperature.

The separation and enrichment of scheelite from calcite are hindered by the similar active Ca2+ sites of scheelite and the calcite with calciferous gangue. Herein, a novel trisiloxane surfactant, N-(2-aminoethyl)-3-aminopropyltrisiloxane (AATS), was first explored and synthesized and recommended as the collector for the flotation separation of scheelite from calcite. The micro-flotation and mixed binary mineral flotation tests showed that AATS had excellent collection performance for scheelite and high selectivity for calcite within a wide pH range. At the same time, contact angle and zeta-potential measurements, Fourier transform infrared (FTIR) analysis, and density functional theory (DFT) calculations revealed the relevant adsorption mechanism. The contact angle measurement showed that AATS can increase the contact angle of the scheelite surface from 41.7 to 95.8°, greatly enhancing the hydrophobicity of the mineral surface. The results of FTIR analysis and zeta-potential measurement explained that AATS was electrostatically adsorbed on the mineral surface, and DFT calculation further verified that the -N+H3-positive group in AATS was adsorbed on the negatively charged scheelite surface. Therefore, AATS can realize the expectation of high efficiency and selectivity of minerals and enhance the adhesion between the surface of scheelite minerals and bubbles, providing a fresh approach to industrial production.

Recovery of wolframite from tungsten mine tailings by the combination of shaking table and flotation with a novel "crab" structure sebacoyl hydroxamic acid.

Tailings ponds for gangue mineral storage are widely recognized as a dangerous source of toxic minerals and heavy metal-bearing solution. Therefore, recovering valuable minerals and critical elements from tailings is an important means to protect the environment in an economic way. Wolframite tailings usually contain a considerable amount of tungsten resources, but the presence of high content of kaolinite sludge makes it very difficult to recycle wolframite. Herein, a novel sebacoyl hydroxamic acid (SHA) was synthesized and introduced as a novel wolframite collector to effectively utilize wolframite tailings, and its collection performance was compared with that of benzohydroxamic acid (BHA). Micro-flotation tests showed that SHA could still obtain 80% wolframite recovery in the presence of kaolinite slimes. Bench-scale flotation tests indicated that SHA can effectively recover wolframite concentrate with 55.64% WO3 grade and 75.28% WO3 recovery from wolframite tailings by the combined shaking table-flotation process. Polarized light microscope observations showed that SHA could promote the formation of hydrophobic agglomerates of wolframite particles. These results show that SHA can be used as an efficient collector for disposing of wolframite tailings, and provide an important reference for the development of efficient and comprehensive utilization of tailings.