Antibacterial Electrospun Poly(vinyl alcohol)/Enzymatic Synthesized Poly(catechol) Nanofibrous Midlayer Membrane for Ultrafiltration.

Two different nanofibrous antibacterial membranes containing enzymatically synthesized poly(catechol) (PC) or silver nitrate (AgNO3, positive control) blended with poly(vinyl alcohol) (PVA) and electrospun onto a poly(vinylidene fluoride) (PVDF) basal disc to generate thin-film composite midlayers were produced for water ultrafiltration applications. The developed membranes were thoroughly characterized in terms of morphology, chemical composition, and general mechanical and thermal features, antimicrobial activity, and ultrafiltration capabilities. The electrospun blends were recognized as homogeneous. Data revealed relevant conformational changes in the PVA side groups, attributed to hydrogen bonding, high thermal stability, and residual mass. PVDF+PVA/AgNO3 membrane displayed 100% growth inhibition of both Gram-positive and Gram-negative bacteria strains, despite the wide range of fiber diameters generated, from 24 to 125 nm, formation of numerous beads, and irregular morphology. The PVDF+PVA/PC membrane showed a good growth inhibition of Staphylococcus aureus (92%) and revealed a smooth morphology with no relevant bead formations and diameters ranging from 68 to 131 nm. The ultrafiltration abilities of the membrane containing PVA/PC were tested in a dead-end high-pressure cell (4 bar) using a reactive dye in distilled water and seawater. After 5 cycles, a maximum rejection of ≈85% with an average flux rate of 70 L m-2 h-1 for distilled water and ≈64% with an average flux rate of 62 L m-2 h-1 for seawater were determined with an overall salt rejection of ≈5%.

Screen-Printed Photochromic Textiles through New Inks Based on SiO2@naphthopyran Nanoparticles.

Photochromic silica nanoparticles (SiO2@NPT), fabricated through the covalent immobilization of silylated naphthopyrans (NPTs) based on 2H-naphtho[1,2-b]pyran (S1, S2) and 3H-naphtho[2,1-b]pyran (S3, S4) or through the direct adsorption of the parent naphthopyrans (1, 3) onto silica nanoparticles (SiO2 NPs), were successfully incorporated onto cotton fabrics by a screen-printing process. Two aqueous acrylic- (AC-) and polyurethane- (PU-) based inks were used as dispersing media. All textiles exhibited reversible photochromism under UV and solar irradiation, developing fast responses and intense coloration. The fabrics coated with SiO2@S1 and SiO2@S2 showed rapid color changes and high contrasts (ΔE*ab = 39-52), despite presenting slower bleaching kinetics (2-3 h to fade to the original color), whereas the textiles coated with SiO2@S3 and SiO2@S4 exhibited excellent engagement between coloration and decoloration rates (coloration and fading times of 1 and 2 min, respectively; ΔE*ab = 27-53). The PU-based fabrics showed excellent results during the washing fastness tests, whereas the AC-based textiles evidenced good results only when a protective transfer film was applied over the printed design.

Peptide structure: Its effect on penetration into human hair.

The influence of the peptide structure on its penetration inside hair was studied, together with the effect of hair bleaching (oxidation). For that reason, the outcome of positioning a charged sequence (KAKAK) either at the N or C terminal on hair penetration has been studied for peptides with 17 residues each. It was observed that the penetration of these peptides into hair was driven by electrostatic interactions, where the position of the charged group at the peptide structure was of major importance. The penetration was only achieved for damaged hair due to its higher negative charge at the membrane surface. It was also observed that the peptides were able to restore the original tensile strength of bleached hair. Consequently, the knowledge of hair surface properties is of extreme importance when designing peptides directed for hair treatment.

Detergent formulations for wool domestic washings containing immobilized enzymes.

The stability of immobilized and native Esperase, a commercial serine protease, was studied by incubating the enzymes in four formulations containing the same amount of anionic and non-ionic surfactants. The results show that the activity of the immobilized enzyme is not affected by the presence of detergents while the native enzyme lost 50% of activity after 20 min of incubation in these four formulations. The washing performance of the detergents prepared with the immobilized Esperase was studied on cotton and wool fabric samples stained with human blood and egg yolk, using as control the detergent containing native Esperase. The best stain removal for cotton samples stained with human blood was achieved using the detergent with immobilized Esperase. Several physical tests confirmed that wool keratin was not degraded by the immobilized Esperase, validating the ability to use formulated detergents containing this immobilized enzyme for safe wool domestic washing.

Fermentation performance of Candida guilliermondii for xylitol production on single and mixed substrate media.

Semidefined media fermentation simulating the sugar composition of hemicellulosic hydrolysates (around 85 g l(-1) xylose, 17 g l(-1) glucose, and 9 g l(-1) arabinose) was investigated to evaluate the glucose and arabinose influence on xylose-to-xylitol bioconversion by Candida guilliermondii. The results revealed that glucose reduced the xylose consumption rate by 30%. Arabinose did not affect the xylose consumption but its utilization by the yeast was fully repressed by both glucose and xylose sugars. Arabinose was only consumed when it was used as a single carbon source. Xylitol production was best when glucose was not present in the fermentation medium. On the other hand, the arabinose favored the xylitol yield (which attained 0.74 g g(-1) xylose consumed) and it did not interfere with xylitol volumetric productivity (Q(P) = 0.85 g g(-1)), the value of which was similar to that obtained with xylose alone.