Lead toxicity in Lucilia cuprina and electrochemical analysis: a simple and low-cost alternative for forensic investigation.

Entomotoxicology allows the detection and analysis of substances such as poisons, drugs, and metals in necrophagous insects using analytical protocols. In a forensic situation related to death by gunshot, the gunshot residue (GSR) is dispersed at the crime scene and may be consumed by necrophagous insects. Lead (Pb) is the most abundant metal in GSR samples and it can be determined using non-portable methods. However, the toxicity effects of GSR samples on Lucilia cuprina (Diptera: Calliphoridae) and the detection of Pb via portable electrochemical methods have not been investigated. This study describes for the first time the toxicity analysis of Pb on immature L. cuprina through their survival rate and influence of Pb on immature development. In addition, the bioaccumulation of Pb in the larvae samples was determined based on square wave anodic stripping voltammetry (SWASV) measurements. The results revealed a low limit of detection to Pb (6.5 µg L-1) and the analytical performance was satisfactory because it measures Pb levels in larvae exposed to a diet containing 50 µg Pb g-1. Furthermore, the levels of Pb influenced the survival rate and development time of the immature L. cuprina. Larvae exposed to a high concentration of the metal (50 µg Pb g -1) showed statistically significant changes (p < 0.05). The presence of Pb in immature L. cuprina can be used to estimate the post-mortem interval; thus, the present study provides important information in forensic entomology.

Environmentally Friendly Manufacturing of Flexible Graphite Electrodes for a Wearable Device Monitoring Zinc in Sweat.

Electrochemical sensors based on graphite and polymers have emerged as powerful analytical tools for bioanalytical applications. However, most of the fabrication processes are not environmentally friendly because they often involve the use of toxic reagents and generate waste. This study describes an alternative method to produce flexible electrodes in plastic substrates using graphite powder and thermal laminating sheets by solid-solid deposition through hot compression, without the use of hazardous chemical reagents. The electrodes developed through the proposed approach have successfully demonstrated flexibility, robustness, reproducibility (relative standard deviation around 6%), and versatility. The electrodes were thoroughly characterized by cyclic voltammetry, electrochemical impedance spectroscopy, Raman spectroscopy, and scanning electron microscopy. As a proof of concept, the electrode surfaces were modified with bismuth and used for zinc analysis in sweat. The modified electrodes presented linearity (R2 = 0.996) for a wide zinc concentration range (50-2000 ppb) and low detection limit (4.31 ppb). The proposed electrodes were tested using real sweat samples and the achieved zinc concentrations did not differ statistically from the data obtained by atomic absorption spectroscopy. To allow wearable applications, a 3D-printed device was fabricated, integrated with the proposed electrochemical system, and fixed at the abdomen by using an elastic tape to collect, store, and analyze the sweat sample. The matrix effect test was performed, spiking the real sample with different zinc levels, and the recovery values varied between 85 and 106%, thus demonstrating adequate accuracy and robustness of the flexible electrodes developed based on the proposed fabrication method.