RESUMO
Osteoarthritis is caused by degeneration of the cartilage, which covers the bone ends of the joints and is decorated with an oligolamellar phospholipid (PL) bilayer. The gap between the bone ends is filled with synovial fluid mainly containing hyaluronic acid (HA). HA and PLs are supposed to reduce friction and protect the cartilage from wear in joint movement. However, a detailed understanding of the molecular mechanisms of joint lubrication is still missing. Previously, we found that aqueous solutions of HA and poly(allylamine hydrochloride) (PAH), the latter serving as a polymeric analogue to HA, adsorb onto the headgroups of surface-bound 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) oligobilayers and significantly enhance their stability with respect to shear forces, typically occurring in joint movement. We now investigated the precise location of PAH chains across the lipid films in neutron reflectivity measurements, as bridging of the oligobilayers by polyelectrolytes (PEs) might be the cause for their improved mechanical stability. In a first set of experiments, we used hydrogenated PAH and chain-deuterated DMPC (DMPC-d54) to improve the contrast between the lipids and potentially intruding PAH. However, due to difficulties in distinguishing between incorporation of water and PAH, penetration into the lipid chain region could hardly be proven quantitatively. Therefore, we designed a more elaborate experiment based on mixed films of DMPC-d54 and hydrogenated DMPC, which is insensitive to water penetration into the films. Beside facilitating a detailed structural characterization of the oligolamellar system, this elaborate approach showed that PAH adsorbs to the DMPC heads and penetrates the lipid tail strata. No PAH was found in the lipid head strata, which excludes bridging of several lipid bilayers by the PE chains. The data are consistent with the assumption that PAH bridges are formed between the headgroups of two adjacent bilayers and contribute to the enhanced mechanical stability.
Assuntos
Dimiristoilfosfatidilcolina , Fosfolipídeos , Dimiristoilfosfatidilcolina/química , Polieletrólitos , Fosfolipídeos/química , Bicamadas Lipídicas/química , Ácido Hialurônico/química , Água/químicaRESUMO
The lithiation of crystalline silicon was studied over several cycles using operando neutron reflectometry over six cycles. A thin layer of aluminum oxide was employed as an artificial coating on the silicon to suppress the solid electrolyte interphase (SEI) layer-related aging effects. Initially, the artificial SEI prevented side effects but led to increased lithium trapping. This layer degraded after two cycles, followed by side reactions, which decrease the coulombic efficiency. No hint for electrode fracturization was found even though the lithiation depth exceeded 1 µm. Two distinct zones with high and low lithium concentrations were found, initially separated by a sharp interface, which broadens with cycling. The correlation of the reflectometry results with the electrochemical current showed the lithium fraction that is lithiated in the silicon and the lithium consumed in side reactions. Also, neutron reflectometry was used to quantify the amount of lithium that remained inside of the silicon. Additional electrochemical impedance spectroscopy was used to gain insights into the electrical properties of the sample via fitting to an equivalent circuit.
RESUMO
The European Spallation Source (ESS), which is under construction in Lund (Sweden), will be the next leading neutron facility with an unprecedented brilliance and novel long-pulse time structure. A long-pulse source not only provides a high time-average flux but also opens the possibility to tune the resolution by using pulse shaping choppers. Thus, an instrument can readily be operated in either a high flux or a high resolution mode. Several of the shorter instruments at the ESS will employ Wavelength Frame Multiplication (WFM) in order to enable a sufficient resolution while offering a continuous and broad wavelength range. A test beamline was operated until the end of 2019 at the research reactor in Berlin to test components and methods, including WFM, in order to prepare the new facility for the operation of neutron instruments and successful first science. We herein demonstrate the implementation of WFM for reflectometry. By selecting a short pulse mode under the same geometrical configuration, we compare and discuss the results for two reference samples. The reported experiments not only serve to prove the reliability of the WFM approach but also, for the first time, demonstrate the full instrument control, data acquisition and data reduction chain that will be implemented at the ESS.
RESUMO
Most commercial lithium-ion batteries and other types of batteries rely on liquid electrolytes, which are preferred because of their high ionic conductivity, and facilitate fast charge-transfer kinetics at the electrodes. On the other hand, hybrid battery concepts that combine solid and liquid electrolytes might be needed to suppress unwanted shuttle effects in liquid electrolyte-only systems, in particular if mobile redox systems are involved in the cell chemistry. However, at the then newly introduced interface between liquid and solid electrolytes, a solid-liquid electrolyte interphase forms. In this study, we analyze the formation of such an interphase between the solid electrolyte lithium phosphorous oxide nitride (Li xPO yN z, "LiPON") and various liquid electrolytes using in situ neutron reflectometry, quartz crystal microbalance, and atomic force microscopy measurements. Our results show that the interphase consists of two layers: a nonconducting layer directly in contact with "LiPON" and a lithium-rich outer layer. Initially, a fast growth of the solid-liquid electrolyte interphase is observed, which slows down significantly afterward, resulting in a thickness of about 20 nm eventually. Here, a formation mechanism is proposed, which describes the solid-liquid electrolyte interphase growth as the fast deposition of a film, which mostly covers the "LiPON", with only a little degree of remaining porosity. The residual void space is then slowly filled, thus blocking the remaining channels for ionic conduction, which leads to increasing resistance of the interphase. The results obtained imply that hybrid battery concepts with liquid electrolyte and solid electrolyte can be hampered by highly resistive interphases, whose formation cannot be simply slowed down or suppressed. Further research is required regarding possible countermeasures.
RESUMO
PURPOSE: To calculate by Monte Carlo simulations kQ factors for Farmer-type ionization chambers in megavoltage photon beams using the new key dosimetry data recommended by the International Commission on Radiation Units and Measurements (ICRU) Report 90. METHODS: Monte Carlo calculations were performed with the EGSnrc code system using both the ICRU 90 and the ICRU 37 data. Farmer-type ionization chambers with graphite and plastic walls and with graphite wall and a plastic waterproofing sleeve were considered (Nuclear Enterprise NE 2571, IBA FC65-G and FC65-P). kQ factors were calculated for photon beams in the range 6-25â¯MV using phase-space files as input radiation sources. The photon beam qualities in terms of TPR20,10 and %dd(10)x were established by simulating the depth-dose curves in water. Absorbed doses to the air cavity and to water were calculated using the egs_chamber user code with a target statistical uncertainty below 0.1%. RESULTS: The update of key dosimetry data according to the ICRU report 90 had an impact of -0.2% in the absorbed dose to water and up to 0.5% in the absorbed dose to the air cavity. Nevertheless, changes partially offset each other when entering in kQ as ratio, and the final impact on the kQ values was below 0.3%. CONCLUSIONS: The calculated values of kQ tend to be lower than the current values in the IAEA TRS-398 protocol with differences up to about 0.5%. A slightly better agreement (within 0.3%) is observed with the Monte-Carlo calculated values provided by the addendum to the AAPM's TG-51 protocol.
Assuntos
Método de Monte Carlo , Radiometria/instrumentaçãoRESUMO
Quasielastic neutron scattering was used to investigate the low energy transfer dynamics of the complex borohydrides Mg(BH4)2 in the α- and ß-modifications, LiBH4 in the low and high temperature crystal structure, and an 1 : 1 molar mixture of LiBH4 + α-Mg(BH4)2. All investigated compounds show a rich dynamic behaviour below an energy range of ΔE = 10 meV with the superposition of rotational dynamics of the constituent [BH4]- anions and low lying lattice modes. For Mg(BH4)2, the rotational diffusion of the [BH4] units was found to be much more activated in the metastable ß-polymorph compared to the α-phase, and the low lying lattice modes are even softer in the former crystal structure. In Mg(BH4)2, the structural phase transition is mainly governed by the lattice dynamics, while alkaline LiBH4 exhibits a transition of the [BH4] rotations around the phase transition temperature. Ball milled LiBH4 + α-Mg(BH4)2 remains a physical mixture of the parent compounds and each component retains its characteristic dynamic signature up to the melting temperature.
RESUMO
Composites made of polymer brushes with inclusions of gold nanoparticles (AuNPs) combine the responsive nature of polymer brushes with the optical properties of the AuNPs, which offers the possibility to be used as colorimetric sensors. To this end, it is crucial to know how AuNPs are distributed inside the brush. Here, this distribution was elucidated by neutron reflectometry with contrast variation and a self-consistent reflectivity analysis based on the analytical parameterization of the volume fraction profiles of all chemical components. In contrast to former studies, this analysis allows the determination of the spatial distribution of components separately from each other: polyelectrolyte, AuNP, and water. Cationic poly-[2-(Methacryloyloxy) ethyl] trimethylammonium chloride (PMETAC) brushes were loaded with 5 nm AuNPs, which were coated with a pH-sensitive capping. The pH was varied during the incubation of the brush in the AuNP suspension. At a lower pH, AuNPs form aggregates in suspension and are attached to the brush periphery. They adsorb into the brush but do not fully penetrate it due to their bulkiness. At a higher pH, AuNP suspensions are electrostatically stabilized and the AuNPs penetrate the brush entirely. However, the AuNP distribution over the brush is not homogeneous but decreases gradually toward the substrate. Penetration of the AuNPs leads to a more extended conformation of the brush. According to the results of the detailed analysis of all components, an increase in water content could be excluded as a reason for brush swelling but replacement of water by the AuNP was observed.
RESUMO
PURPOSE: To investigate the feasibility of using the ratio of dose-area product at 20â¯cm and 10â¯cm water depths (DAPR20,10) as a beam quality specifier for radiotherapy photon beams with field diameter below 2â¯cm. METHODS: Dose-area product was determined as the integral of absorbed dose to water (Dw) over a surface larger than the beam size. 6â¯MV and 10â¯MV photon beams with field diameters from 0.75â¯cm to 2â¯cm were considered. Monte Carlo (MC) simulations were performed to calculate energy-dependent dosimetric parameters and to study the DAPR20,10 properties. Aspects relevant to DAPR20,10 measurement were explored using large-area plane-parallel ionization chambers with different diameters. RESULTS: DAPR20,10 was nearly independent of field size in line with the small differences among the corresponding mean beam energies. Both MC and experimental results showed a dependence of DAPR20,10 on the measurement setup and the surface over which Dw is integrated. For a given setup, DAPR20,10 values obtained using ionization chambers with different air-cavity diameters agreed with one another within 0.4%, after the application of MC correction factors accounting for effects due to the chamber size. DAPR20,10 differences among the small field sizes were within 1% and sensitivity to the beam energy resulted similar to that of established beam quality specifiers based on the point measurement of Dw. CONCLUSIONS: For a specific measurement setup and integration area, DAPR20,10 proved suitable to specify the beam quality of small photon beams for the selection of energy-dependent dosimetric parameters.
Assuntos
Fótons/uso terapêutico , Radiometria/métodos , Dosagem Radioterapêutica , Ar , Radioisótopos de Cobalto/uso terapêutico , Simulação por Computador , Método de Monte Carlo , Aceleradores de Partículas , Incerteza , ÁguaRESUMO
The solvent dynamics of concentrated solutions of poly(N-isopropylacrylamide) (PNIPAM, 25 wt %) in water/methanol mixtures (85:15 v/v) are measured with the aim of shedding light onto the cononsolvency effect. Quasi-elastic neutron scattering (QENS) with contrast variation has been carried out at temperatures below and above the cloud point by using in the first set of experiments the mixture H2O:d-MeOD (d-MeOD denotes fully deuterated methanol) as a solvent and in the second set of experiments the mixture D2O:MeOH (MeOH denotes methanol). As a reference, bulk H2O, bulk MeOH and the mixtures H2O:d-MeOD and D2O:MeOH (both 85:15 v/v) have been investigated as well. In the PNIPAM solution in H2O:d-MeOD, two water populations are identified, namely strongly and less strongly arrested water. At the cloud point, the former is partially released from PNIPAM. The diffusion coefficient of the latter one is similar to the one in the water/methanol mixture, and its residence time decreases at the cloud point. The PNIPAM solution in D2O:MeOH reveals similar dynamics to the one in H2O:d-MeOD which may reflect that the dynamics of MeOH near the PNIPAM chain is similar to the one of H2O. The similarity may, however, partially be due to H/D exchange between D2O and MeOH. In both PNIPAM solutions, the mean-square displacement of the PNIPAM chain decreases gradually above the cloud point.
RESUMO
A quasielastic neutron scattering study on ß-Mg(BH4)2 has been performed to investigate the hydrogen dynamics on the picosecond time-scale. Both vibrational and rotational motions of the [BH4](-) tetrahedra contribute to the signal at low energy transfers. A comprehensive analysis of the elastic and quasielastic incoherent structure factors allowed the separation of different parts. Below 200 K, vibrations and rotations (around the C2 or C3 symmetry axis of the [BH4](-) tetrahedra) are well separated. Above that temperature, a transition is observed in the vibrational part, and the spectral weight is shifted towards the quasielastic region. The dynamic transition is not accompanied by any structural phase change but we suggest that it is correlated with the anomalous thermal expansion that has been reported for ß-Mg(BH4)2 [Filinchuk, et al., Chem. Mater., 2009, 21, 925].
RESUMO
For aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions, a structural instability leads to the collapse and aggregation of the macromolecules at the temperature-induced demixing transition. The accompanying cooperative dehydration of the PNIPAM chains is known to play a crucial role in this phase separation. We elucidate the impact of partial dehydration of PNIPAM on the volume changes related to the phase separation of dilute to concentrated PNIPAM solutions. Quasi-elastic neutron scattering enables us to directly follow the isotropic jump diffusion behavior of the hydration water and the almost freely diffusing water. As the hydration number decreases from 8 to 2 for the demixing 25 mass % PNIPAM solution, only a partial dehydration of the PNIPAM chains occurs. Dilatation studies reveal that the transition-induced volume changes depend in a remarkable manner on the PNIPAM concentration of the solutions. The excess volume per mole of H2O molecules expelled from the solvation layers of PNIPAM during phase separation probably strongly increases from dilute to concentrated PNIPAM solutions. This finding is qualitatively related to the immense strain-softening previously observed for demixing PNIPAM solutions.