Legislation in Hospital Dentistry: Gaps, Perspectives and Desires

Abstract Objective: To analyze the existing state legislation, including not only the ordinary laws, but also their infralegal regulation and the state legislation on Hospital Dentistry. Material and Methods: A survey was carried out in the databases of the Legislative Assemblies of the Brazilian States and the Federal District, as well as the Regional and Federal Councils of Dentistry in Brazil. Subsequently, a survey was carried out in the databases of the Ministry of Health, State Dental Councils and Federal Dental Council in Brazil. Results: Only 8 Brazilian states have legislation in force regarding hospital dentistry, which represents 29.63% of the federative units. Among the Brazilian regions, the Midwest presented the highest prevalence of the laws found (37.50%), followed by the North (25%) and the other regions with the same coverage (12.50%). Also, an orientation and an ordinance from the Ministry of Health, six resolutions from the Federal Council of Dentistry, and a technical note from the National Health Surveillance Agency were found. Conclusion: Several States do not have rules on the subject, making it imperative to create a federal rule that not only imposes the presence of the dentist, but also regulates the proportion of the team, workload, and availability.

Cost-effectiveness analysis of COVID-19 tests in the unified health system.

BACKGROUND: To evaluate the cost-effectiveness ratio and economic impact of the Rapid Antigen Test (TR-Ag) to replace RT-PCR for the detection of the new Coronavirus in the Unified Health System (SUS). METHODS: This is a cost-effectiveness analysis. Clinical protocols were used for the diagnosis of COVID-19 at the São José Municipal Hospital, located in the city of Itaberá-SP. The Incremental Cost-Effectiveness Ratio (ICER) was divided into two scenarios. In the first, the accuracy reported by the test manufacturers was included, and in the second, the cost resulting from a systematic review. Both were compared with the performance of the RT-PCR test. The increase in diagnoses was chosen as a health outcome and absenteeism was used as a criterion for assessing the economic impact. RESULTS: The analysis resulted in incremental cost-effectiveness ratios of R$ 42,136.67 and R$ 68,329.73 for every thousand tests, according to the accuracy of the manufacturers' TR-Ag tests and what is reported in the literature in relation to RT-PCR, respectively. The average value found for the RT-PCR test (R$ 202.87) represents an increase of 165.32% in cost in relation to the value found for the TR-Ag. 4,305 tests were performed between April 2020 and December 2021 at the referral hospital. Also, maintaining the use of RT-PCR as the first choice for diagnosing COVID-19 and regulating absenteeism in the economically active population could have an impact of up to R$ 1,022,779.68 on municipal management. CONCLUSION: It is concluded that the TR-Ag are configured as a cost-effective alternative for the SUS in the detection of the new Coronavirus. The strategy becomes economically favorable for the expansion of testing, combating the COVID-19 pandemic and reducing the impact on the local economy. However, studies are needed to validate the accuracy of the tests so that economic evaluations on the subject are more assertive.

Economic analysis of the different endodontic instrumentation techniques used in the Unified Health System.

BACKGROUND: To assess the financial impact of incorporating a new (reciprocal) technology into endodontic treatments in the public health system (SUS). METHODS: This was a economic evaluation study (comparing the 3 different endodontic instrumentation techniques-manual, rotary and reciprocating), allocative efficiency analysis to optimize existing resources in the SUS, and financial contribution impact analysis of incorporation of a new technology. Thirty-one (31) 12 years-old volunteers were evaluated. RESULTS: The incremental cost-effectiveness ratio (ICER) was calculated at R$1.34/min, - R$0.60/min and BRL 0.10/min for the single-rooted, bi-rooted and tri-rooted teeth, respectively, when the rotary technique was compared with the manual type. In turn, the ICER was R$ 21.04/min, - R$ 0.73/min and - R$ 2.81/min for the 3 types of teeth, respectively, when the reciprocating technique was compared with the manual type. The incremental financial impact of replacing manual endodontic with rotary endodontic treatments would be - R$ 2060963.66 in the case of single-rooted teeth, but the number of treatments would also be reduced (- 19,379). In the case of two-rooted teeth, the incremental financial impact would be BRL 34921540.62 with the possibility of performing an additional 204,110 treatments. In turn, BRL 11523561.50 represented the incremental financial impact for teeth with 3 or more roots and with an increase of 72,545 procedures. When we analyzed the incremental financial impact of replacing manual endodontic with reciprocating endodontic treatments, it would be - R$ 730227.80 in the case of single-rooted teeth, allowing for an additional 2538 treatments. In turn, R$ 21674853.00 represented the incremental financial impact for bi-radicular teeth, with an increase of 121,700 procedures. In the case of two-rooted teeth, the incremental financial impact would be BRL 13591742.90 with the possibility of performing an additional 40,670 treatments. CONCLUSIONS: The reciprocating technique could improve access to endodontic treatment in the SUS as it allowed a simultaneous reduction in clinical time and associated costs. However, the higher number of endodontic treatments performed would have a financial impact.

Do commercial whitening dentifrices increase enamel erosive tooth wear?

OBJECTIVE: This in vitro study evaluated the effect of commercial whitening dentifrices on erosive tooth wear (ETW) of bovine enamel samples, in comparison with commercial regular dentifrices. METHODOLOGY: Sixty bovine crowns were embedded in acrylic resin, polished and then had their baseline profile determined. They were randomly assigned to 5 groups (n=12/group), according to the type of commercial dentifrice to be tested: GI - Crest Anti-cavity Regular; GII - Crest 3D White; GIII - Colgate Total 12 Clean Mint; GIV - Colgate Optic White; GV - Placebo (negative control, fluoride-free dentifrice). The samples were submitted to daily erosive and abrasive challenges for 3 days. The erosive challenges were performed 3 times a day by immersing the specimens in 0.1% citric acid solution (pH 2.5) for 90 s. Each day after the first and last erosive challenges, the specimens were subjected to the abrasive challenge for 15 s, using a toothbrushing machine (Biopdi, São Carlos, SP, Brazil), soft toothbrushes and slurry (1:3 g/ml) of the tested toothpastes (1.5 N). The specimens were kept in artificial saliva between the challenges. The final profile was obtained and the ETW (µm) was calculated. Data were analyzed by Kruskal-Wallis and Dunn's tests (p<0.05). RESULTS: All dentifrices tested significantly reduced the enamel wear in comparison with the Placebo, except GIII. The median (95% CI) ETW was 1.35 (1.25-1.46)bc for GI, 1.17 (1.01-1.34)cd for GII, 1.36 (1.28-1.45)ab for GIII, 1.08 (1.04-1.14)d for GIV and 2.28 (2.18-2.39)a for GV. CONCLUSION: When dentifrices from the same manufacturer were compared, the whitening dentifrices led to similar or less wear than the regular ones.

Do commercial whitening dentifrices increase enamel erosive tooth wear?

Abstract Objective This in vitro study evaluated the effect of commercial whitening dentifrices on erosive tooth wear (ETW) of bovine enamel samples, in comparison with commercial regular dentifrices. Methodology Sixty bovine crowns were embedded in acrylic resin, polished and then had their baseline profile determined. They were randomly assigned to 5 groups (n=12/group), according to the type of commercial dentifrice to be tested: GI - Crest Anti-cavity Regular; GII - Crest 3D White; GIII - Colgate Total 12 Clean Mint; GIV - Colgate Optic White; GV - Placebo (negative control, fluoride-free dentifrice). The samples were submitted to daily erosive and abrasive challenges for 3 days. The erosive challenges were performed 3 times a day by immersing the specimens in 0.1% citric acid solution (pH 2.5) for 90 s. Each day after the first and last erosive challenges, the specimens were subjected to the abrasive challenge for 15 s, using a toothbrushing machine (Biopdi, São Carlos, SP, Brazil), soft toothbrushes and slurry (1:3 g/ml) of the tested toothpastes (1.5 N). The specimens were kept in artificial saliva between the challenges. The final profile was obtained and the ETW (µm) was calculated. Data were analyzed by Kruskal-Wallis and Dunn's tests (p<0.05). Results All dentifrices tested significantly reduced the enamel wear in comparison with the Placebo, except GIII. The median (95% CI) ETW was 1.35 (1.25-1.46)bc for GI, 1.17 (1.01-1.34)cd for GII, 1.36 (1.28-1.45)ab for GIII, 1.08 (1.04-1.14)d for GIV and 2.28 (2.18-2.39)a for GV. Conclusion When dentifrices from the same manufacturer were compared, the whitening dentifrices led to similar or less wear than the regular ones.

Analysis of Chemical Composition of Different Irreversible Hydrocolloids.

Irreversible hydrocolloids (IR) is a dental impression material commonly used in Brazilian and European dental practice because it is inexpensive, easy to handle, has good reproductive detail and is comfortable for the patient. This research aimed to analyze the chemical composition of eight different IRs for dental use. A sample of 0.2 g was weighed and transferred to a Teflon beaker moistened with drops of distilled or deionized water; 5 mL of nitric acid was added until total solubility of the sample; the solution was transferred to a 100 mL volumetric flask, the volume was filled with distilled or deionized water and homogenized. Thirty-five chemical elements were found: Lithium, Beryllium, Boron, Sodium, Magnesium, Aluminum, Silicon, Phosphorus, Potassium, Titanium, Manganese, Cobalt, Nickel, Vanadium, Zinc, Rubidium, Arsenic, Iron, Copper, Strontium, Yttrium, Zirconium, Niobium, Molybdenum, Ruthenium, Cadmium, Tin, Antimony, Barium, Lanthanum, Cerium, Mercury, Lead, Thorium and Uranium. Only one of the samples contained no Nickel, Antimony and Lead; and Arsenic and Uranium were found in 2 samples. This study provided evidence of high toxicity of the IR brands, pointing out the need for better quality control of this product, in order to prevent health damage in dentists, prosthesis technicians and patients.

Artefato metálico em tomografia computadorizada de feixe cônico / Metallic artifact in cone beam computed tomography

A imagem é uma importante ferramenta de diagnóstico para a avaliação do paciente odontológico. E desde o advento da tomografia computadorizada por Ambrose1 em 1973, o diagnóstico e o planejamento dos tratamentos ganharam um grande aliado. As tomografias computadorizadas são técnicas imaginológicas onde se obtêm imagens em diversos planos com uma fidelidade das mensurações muito próximas à realidade. Entretanto, o diagnóstico pode ser dificultado pela presença de artefatos. Nesta revisão de literatura, o enfoque será aos artefatos metálicos. A imagem produzida pelos artefatos frequentemente interferem na visualização de estruturas anatômicas, podendo confundir o diagnóstico. O objetivo do presente artigo é explicar brevemente a tomografia computadorizada cone beam, a formação de imagem nesse tipo de tomografia e o que são e como são gerados os artefatos metálicos, esclarecendo aspectos ligados a sua formação, características que proporcionam às imagens e ideias de solução desse problema que constantemente prejudicam o diagnóstico por imagem nessa modalidade de exame. Pode-se concluir que a diminuição do aparecimento de artefatos pode ser devido à calibração adequada do aparelho, orientação ao paciente sobre o procedimento a ser realizado, além da atenuação com equipamentos e softwares que utilizam campo de visão e tamanho de voxel pequenos. E os profissionais que trabalham com tomografia computadorizada devem estar preparados para identicá-los, solicitando outros exames complementares para realizar diagnóstico diferencial, caso seja necessário

This is an important diagnostic tool for Evaluating the dental patient. Since the advent of computed tomography (CT) by Ambrose1 in 1973, the diagnosis and planning of treatment have gained a great ally. CT scans are imaginological techniques where you get images in different planes with a fidelity of measurements very close to reality. However, diagnosis can be hindered by the presence of artifacts. The main focus of this review was the metallic artifacts and subjects related to them. The image produced by metallic artifacts often interferes with visualization of anatomical structures and may lead to misdiagnosis. The purpose of this article is to briefly explain the computerized cone beam tomography, the imaging in this type of tomography and what they are and how the metal artifacts are generated, clarifying aspects related to their formation, characteristics that give images, solution and ideas to this problem that constantly damage the imaging examination in this mode. It can be concluded that the decrease in the appearance of artifacts may be due to proper calibration of the device, the patient guidance on the procedure to be performed, as well as mitigation with equipment and software using of view and small voxel size. We can conclude that the professionals who work with computed tomography should be prepared to identify them and ask for other exams to perform differential diagnosis, if necessary

Salivary lactoferrin in HIV-infected children: correlation with Candida albicans carriage, oral manifestations, HIV infection and its antifungal activity.

OBJECTIVES: This study aimed to evaluate the concentration of lactoferrin in the saliva of HIV infected and healthy children and analyze the associations between lactoferrin levels, Candida sp. colonization, oral manifestations and medical data. Also, the antifungal ability of lactoferrin to inhibit the growth of Candida albicans isolated from saliva of these children was investigated in vitro. SUBJECTS AND METHODS: Saliva was collected from 70 HIV-infected and 50 healthy children, followed by oral manifestation assessments. The salivary lactoferrin was quantified using an ELISA Kit. The salivary samples were cultured and the Candida spp. colonies counted and then identified by sugar assimilation and fermentation. The antifungal activity of lactoferrin was analyzed in vitro with 10 isolates of C. albicans from each group. RESULTS: The HIV infected children (mean age 9.8 ± 2.8) had higher lactoferrin levels (median 6.13 µg/ml (3.58-7.89)) and were colonized three times more by Candida sp. than the control group (mean age 9.4 ± 2.4) (median 5.74 µg/ml (3.12-6.86)) (p=0.003). Statistical associations were found considering the salivary lactoferrin levels and Candida sp. and oral manifestations between the groups. No associations between lactoferrin concentrations and oral manifestations, immunosuppression, presence of AIDS and use of HAART were observed in the HIV group. The percentage of dead C. albicans due to lactoferrin was inversely proportional to C. albicans cell density for both groups (p<0.001). CONCLUSIONS: HIV-infected children have higher concentrations of lactoferrin and it was associated with Candida sp. colonization but no association with medical data was found. Also, both groups showed similar lactoferrin antifungal activity.