Advanced Electrolyte Formula for Robust Operation of Vanadium Redox Flow Batteries at Elevated Temperatures.

Insufficient thermal stability of vanadium redox flow battery (VRFB) electrolytes at elevated temperatures (>40 °C) remains a challenge in the development and commercialization of this technology, which otherwise presents a broad range of technological advantages for the long-term storage of intermittent renewable energy. Herein, a new concept of combined additives is presented, which significantly increases thermal stability of the battery, enabling safe operation to the highest temperature (50 °C) tested to date. This is achieved by combining two chemically distinct additives-inorganic ammonium phosphate and polyvinylpyrrolidone (PVP) surfactant, which collectively decelerate both protonation and agglomeration of the oxo-vanadium species in solution and thereby significantly suppress detrimental formation of precipitates. Specifically, the precipitation rate is reduced by nearly 75% under static conditions at 50° C. This improvement is reflected in the robust operation of a complete VRFB device for over 300 h of continuous operation at 50 °C, achieving an impressive 83% voltage efficiency at 100 mA cm‒2 current density, with no precipitation detected in either the electrode/flow-frame or electrolyte tank.

Optimal Coatings of Co3 O4 Anodes for Acidic Water Electrooxidation.

Implementation of proton-exchange membrane water electrolyzers for large-scale sustainable hydrogen production requires the replacement of scarce noble-metal anode electrocatalysts with low-cost alternatives. However, such earth-abundant materials often exhibit inadequate stability and/or catalytic activity at low pH, especially at high rates of the anodic oxygen evolution reaction (OER). Here, the authors explore the influence of a dielectric nanoscale-thin oxide layer, namely Al2 O3 , SiO2 , TiO2 , SnO2 , and HfO2 , prepared by atomic layer deposition, on the stability and catalytic activity of low-cost and active but insufficiently stable Co3 O4 anodes. It is demonstrated that the ALD layers improve both the stability and activity of Co3 O4 following the order of HfO2 > SnO2 > TiO2 > Al2 O3 , SiO2 . An optimal HfO2 layer thickness of 12 nm enhances the Co3 O4 anode durability by more than threefold, achieving over 42 h of continuous electrolysis at 10 mA cm-2 in 1 m H2 SO4 electrolyte. Density functional theory is used to investigate the superior performance of HfO2 , revealing a major role of the HfO2 |Co3 O4 interlayer forces in the stabilization mechanism. These insights offer a potential strategy to engineer earth-abundant materials for low-pH OER catalysts with improved performance from earth-abundant materials for efficient hydrogen production.

Concluding remarks: Sustainable nitrogen activation - are we there yet?

The activation of dinitrogen as a fundamental step in reactions to produce nitrogen compounds, including ammonia and nitrates, has a cornerstone role in chemistry. Bringing together research from disparate fields where this can be achieved sustainably, this Faraday Discussion seeks to build connections between approaches that can stimulate further advances. In this paper we set out to provide an overview of these different approaches and their commonalities. We explore experimental aspects including the positive role of increasing nitrogen pressure in some fields, as well as offering perspectives on when 15N2 experiments might, and might not, be necessary. Deconstructing the nitrogen reduction reaction, we attempt to provide a common framework of energetic scales within which all of the different approaches and their components can be understood. On sustainability, we argue that although green ammonia produced from a green-H2-fed Haber-Bosch process seems to fit the bill, there remain many real-world contexts in which other, sustainable, approaches to this vital reaction are urgently needed.

Tuning Catalyst Selectivity for Ammonia vs Hydrogen: An Investigation into the Coprecipitation of Mo and Fe Sulfides.

Iron sulfides are key materials in metalloprotein catalysis. One interesting aspect of iron sulfides in biology is the incorporation of secondary metals, for example, Mo, in nitrogenase. These secondary metals may provide vital clues as to how these enzymes first emerged in nature. In this work, we examined the materials resulting from the coprecipitation of molybdenum with iron sulfides using X-ray absorption spectroscopy (XAS). The materials were tested as catalysts, and direct reductants using nitrite (NO2-) and protons (H+) as test substrates. It was found that Mo will coprecipitate with iron as sulfides, however, in distinct ways depending on the stoichiometric ratios of Mo, Fe, and HS-. It was observed that the selectivity of reduction products depends on the amount of molybdenum, with the presence of approximately at 10% Mo optimizing ammonium/ammonia (NH4+/NH3) production from NO2- and minimizing competitive hydrogen (H2) formation from protons (H+) with a secondary reductant.

Understanding the Role of (W, Mo, Sb) Dopants in the Catalyst Evolution and Activity Enhancement of Co3 O4 during Water Electrolysis via In Situ Spectroelectrochemical Techniques.

Unlocking the potential of the hydrogen economy is dependent on achieving green hydrogen (H2 ) production at competitive costs. Engineering highly active and durable catalysts for both oxygen and hydrogen evolution reactions (OER and HER) from earth-abundant elements is key to decreasing costs of electrolysis, a carbon-free route for H2 production. Here, a scalable strategy to prepare doped cobalt oxide (Co3 O4 ) electrocatalysts with ultralow loading, disclosing the role of tungsten (W), molybdenum (Mo), and antimony (Sb) dopants in enhancing OER/HER activity in alkaline conditions, is reported. In situ Raman and X-ray absorption spectroscopies, and electrochemical measurements demonstrate that the dopants do not alter the reaction mechanisms but increase the bulk conductivity and density of redox active sites. As a result, the W-doped Co3 O4 electrode requires ≈390 and ≈560 mV overpotentials to reach ±10 and ±100 mA cm-2 for OER and HER, respectively, over long-term electrolysis. Furthermore, optimal Mo-doping leads to the highest OER and HER activities of 8524 and 634 A g-1 at overpotentials of 0.67 and 0.45 V, respectively. These novel insights provide directions for the effective engineering of Co3 O4 as a low-cost material for green hydrogen electrocatalysis at large scales.

A Survey of Catalytic Materials for Ammonia Electrooxidation to Nitrite and Nitrate.

Studies of the ammonia oxidation reaction (AOR) for the synthesis of nitrite and nitrate (NO2/3 - ) have been limited to a small number of catalytic materials, majorly Pt based. As the demand for nitrate-based products such as fertilisers continues to grow, exploration of alternative catalysts is needed. Herein, 19 metals immobilised as particles on carbon fibre electrodes were tested for their catalytic activity for the ammonia electrooxidation to NO2/3 - under alkaline conditions (0.1 m KOH). Nickel-based electrodes showed the highest overall NO2/3 - yield with a rate of 5.0±1.0 nmol s-1 cm-2 , to which nitrate contributed 62±8 %. Cu was the only catalyst that enabled formation of nitrate, at a rate of 1.0±0.4 nmol s-1 cm-2 , with undetectable amounts of nitrite produced. Previously unexplored in this context, Fe and Ag also showed promise and provided new insights into the mechanisms of the process. Ag-based electrodes showed strong indications of activity towards NH3 oxidation in electrochemical measurements but produced relatively low NO2/3 - yields, suggesting the formation of alternate oxidation products. NO2/3 - production over Fe-based electrodes required the presence of dissolved O2 and was more efficient than with Ni on longer timescales. These results highlight the complexity of the AOR mechanism and provide a broad set of catalytic activity and nitrate versus nitrite yield data, which might guide future development of a practical process for the distributed sustainable production of nitrates and nitrites at low and medium scales.

High-Performance Magnesium Electrochemical Cycling with Hybrid Mg-Li Electrolytes.

Kinetics and coulombic efficiency of the electrochemical magnesium plating and stripping processes are to a significant extent defined by the composition of the electrolyte solution, optimization of which presents a pathway for improved performance. Adopting this strategy, we undertook a systematic investigation of the Mg0/2+ process in different combinations of the Mg2+-Li+-borohydride-bis(trifluoromethylsulfonyl)imide (TFSI-) electrolytes in 1,2-dimethoxyethane (DME) solvent. Results indicate that the presence of BH4- is essential for high coulombic efficiency, which coordination to Mg2+ was confirmed by Raman and NMR spectroscopic analysis. However, the high rates observed also require the presence of Li+ and a supplementary anion such as TFSI-. The Li+ + BH4- + TFSI- combination of ionic species prevents passivation of the magnesium surface and thereby enables efficient Mg0/2+ electrochemical cycling. The best Mg0/2+ performance with the stabilized coulombic efficiency of 88 ± 1% and one of the highest deposition/stripping rates at ambient temperature reported to date are demonstrated at an optimal [Mg(BH4)2]:[LiTFSI] mole ratio of 1:2.

Nanoscale TiO2 Coatings Improve the Stability of an Earth-Abundant Cobalt Oxide Catalyst during Acidic Water Oxidation.

The large-scale deployment of proton-exchange membrane water electrolyzers for high-throughput sustainable hydrogen production requires transition from precious noble metal anode electrocatalysts to low-cost earth-abundant materials. However, such materials are commonly insufficiently stable and/or catalytically inactive at low pH, and positive potentials required to maintain high rates of the anodic oxygen evolution reaction (OER). To address this, we explore the effects of a dielectric nanoscale-thin layer, constituted of amorphous TiO2, on the stability and electrocatalytic activity of nanostructured OER anodes based on low-cost Co3O4. We demonstrate a direct correlation between the OER performance and the thickness of the atomic layer deposited TiO2 layers. An optimal TiO2 layer thickness of 4.4 nm enhances the anode lifetime by a factor of ca. 3, achieving 80 h of continuous electrolysis at pH near zero, while preserving high OER catalytic activity of the bare Co3O4 surface. Thinner and thicker TiO2 layers decrease the stability and activity, respectively. This is attributed to the pitting of the TiO2 layer at the optimal thickness, which allows for access to the catalytically active Co3O4 surface while stabilizing it against corrosion. These insights provide directions for the engineering of active and stable composite earth-abundant materials for acidic water splitting for high-throughput hydrogen production.

Electroreduction of nitrogen with almost 100% current-to-ammonia efficiency.

In addition to its use in the fertilizer and chemical industries1, ammonia is currently seen as a potential replacement for carbon-based fuels and as a carrier for worldwide transportation of renewable energy2. Implementation of this vision requires transformation of the existing fossil-fuel-based technology for NH3 production3 to a simpler, scale-flexible technology, such as the electrochemical lithium-mediated nitrogen-reduction reaction3,4. This provides a genuine pathway from N2 to ammonia, but it is currently hampered by limited yield rates and low efficiencies4-12. Here we investigate the role of the electrolyte in this reaction and present a high-efficiency, robust process that is enabled by compact ionic layering in the electrode-electrolyte interface region. The interface is generated by a high-concentration imide-based lithium-salt electrolyte, providing stabilized ammonia yield rates of 150 ± 20 nmol s-1 cm-2 and a current-to-ammonia efficiency that is close to 100%. The ionic assembly formed at the electrode surface suppresses the electrolyte decomposition and supports stable N2 reduction. Our study highlights the interrelation between the performance of the lithium-mediated nitrogen-reduction reaction and the physicochemical properties of the electrode-electrolyte interface. We anticipate that these findings will guide the development of a robust, high-performance process for sustainable ammonia production.

Metallic Inverse Opal Frameworks as Catalyst Supports for High-Performance Water Electrooxidation.

High intrinsic activity of oxygen evolution reaction (OER) catalysts is often limited by their low electrical conductivity. To address this, we introduce copper inverse opal (IO) frameworks offering a well-developed network of interconnected pores as highly conductive high-surface-area supports for thin catalytic coatings, for example, the extremely active but poorly conducting nickel-iron layered double hydroxides (NiFe LDH). Such composites exhibit significantly higher OER activity in 1 m KOH than NiFe LDH supported on a flat substrate or deposited as inverse opals. The NiFe LDH/Cu IO catalyst enables oxygen evolution rates of 100 mA cm-2 (727±4 A gcatalyst -1 ) at an overpotential of 0.305±0.003 V with a Tafel slope of 0.044±0.002 V dec-1 . This high performance is achieved with 2.2±0.4 µm catalyst layers, suggesting compatibility of the inverse-opal-supported catalysts with membrane electrolyzers, in contrast to similarly performing 103 -fold thicker electrodes based on foams and other substrates.

Self-Enhancement of Efficiency and Self-Attenuation of Hysteretic Behavior of Perovskite Solar Cells with Aging.

Spontaneous enhancement of the photovoltaic performance of perovskite solar cells (PSCs) after aging has been reported, but the underlying reasons for such behavior are still under debate. Herein, we demonstrate that this spontaneous improvement effect accompanied by self-attenuation of hysteresis in the current-voltage characteristics is time- and temperature-dependent. Moreover, it is universal to PSCs based on a range of mixed-ion perovskites and coupled to different hole- and electron-transporting materials. Time-resolved confocal fluorescence microscopy and other characterization techniques suggest that the "self-healing" phenomenon is accompanied by the homogenization and enhancement of the charge extraction efficiency as well as suppressed recombination throughout cm2-scale perovskite layers. These dynamic effects need to be accounted for when assessing the initial and stabilized performance of PSCs.

Copper-Catalyzed Electrosynthesis of Nitrite and Nitrate from Ammonia: Tuning the Selectivity via an Interplay Between Homogeneous and Heterogeneous Catalysis.

Electrocatalytic oxidation of ammonia is an appealing, low-temperature process for the sustainable production of nitrites and nitrates that avoids the formation of pernicious N2 O and can be fully powered by renewable electricity. Currently, however, the number of known efficient catalysts for such a reaction is limited. The present work demonstrates that copper-based electrodes exhibit high electrocatalytic activity and selectivity for the NH3 oxidation to NO2 - and NO3 - in alkaline solutions. Systematic investigation of the effects of pH and potential on the kinetics of the reaction using voltammetric analysis andin situ Raman spectroscopy suggest that ammonia electrooxidation on copper occurrs via two primary catalytic mechanisms. In the first pathway, NH3 is converted to NO2 - via a homogeneous electrocatalytic process mediated by redox transformations of aqueous [Cu(OH)4 ]-/2- species, which dissolve from the electrode. The second pathway is the heterogeneous catalytic oxidation of NH3 on the electrode surface favoring the formation of NO3 - . By virtue of its nature, the homogeneous-mediated pathway enables higher selectivity and was less affected by electrode poisoning with the strongly adsorbed "N" intermediates that have plagued the electrocatalytic ammonia oxidation field. Thus, the selectivity of the Cu-catalyzed NH3 oxidation towards either nitrite or nitrate can be achieved through balancing the kinetics of the two mechanisms by adjusting the pH of the electrolyte medium and potential.

Nitrogen reduction to ammonia at high efficiency and rates based on a phosphonium proton shuttle.

Ammonia (NH3) is a globally important commodity for fertilizer production, but its synthesis by the Haber-Bosch process causes substantial emissions of carbon dioxide. Alternative, zero-carbon emission NH3 synthesis methods being explored include the promising electrochemical lithium-mediated nitrogen reduction reaction, which has nonetheless required sacrificial sources of protons. In this study, a phosphonium salt is introduced as a proton shuttle to help resolve this limitation. The salt also provides additional ionic conductivity, enabling high NH3 production rates of 53 ± 1 nanomoles per second per square centimeter at 69 ± 1% faradaic efficiency in 20-hour experiments under 0.5-bar hydrogen and 19.5-bar nitrogen. Continuous operation for more than 3 days is demonstrated.

Stable Acidic Water Oxidation with a Cobalt-Iron-Lead Oxide Catalyst Operating via a Cobalt-Selective Self-Healing Mechanism.

The instability and expense of anodes for water electrolyzers with acidic electrolytes can be overcome through the implementation of a cobalt-iron-lead oxide electrocatalyst, [Co-Fe-Pb]Ox , that is self-healing in the presence of dissolved metal precursors. However, the latter requirement is pernicious for the membrane and especially the cathode half-reaction since Pb2+ and Fe3+ precursors poison the state-of-the-art platinum H2 evolving catalyst. To address this, we demonstrate the invariably stable operation of [Co-Fe-Pb]Ox in acidic solutions through a cobalt-selective self-healing mechanism without the addition of Pb2+ and Fe3+ and investigate the kinetics of the process. Soft X-ray absorption spectroscopy reveals that low concentrations of Co2+ in the solution stabilize the catalytically active Co(Fe) sites. The highly promising performance of this system is showcased by steady water electrooxidation at 80±1 °C and 10 mA cm-2 , using a flat electrode, at an overpotential of 0.56±0.01 V on a one-week timescale.

Prospects of Z-Scheme Photocatalytic Systems Based on Metal Halide Perovskites.

Considering the attractive optoelectronic properties of metal halide perovskites (MHPs), their introduction to the field of photocatalysis was only a matter of time. Thus far, MHPs have been explored for the photocatalytic generation of hydrogen, carbon dioxide reduction, organic synthesis, and pollutant degradation applications. Of growing research interest and possible applied significance are the currently emerging developments of MHP-based Z-scheme heterostructures, which can potentially enable efficient photocatalysis of highly energy-demanding redox processes. In this Perspective, we discuss the advantages and limitations of MHPs compared to traditional semiconductor materials for applications as photocatalysts and describe emerging examples in the construction of MHP-based Z-scheme systems. We discuss the principles and material properties that are required for the development of such Z-scheme heterostructure photocatalysts and consider the ongoing challenges and opportunities in this emerging field.

Identification and elimination of false positives in electrochemical nitrogen reduction studies.

Ammonia is of emerging interest as a liquefied, renewable-energy-sourced energy carrier for global use in the future. Electrochemical reduction of N2 (NRR) is widely recognised as an alternative to the traditional Haber-Bosch production process for ammonia. However, though the challenges of NRR experiments have become better understood, the reported rates are often too low to be convincing that reduction of the highly unreactive N2 molecule has actually been achieved. This perspective critically reassesses a wide range of the NRR reports, describes experimental case studies of potential origins of false-positives, and presents an updated, simplified experimental protocol dealing with the recently emerging issues.

2,6-Diiminopyridine complexes of group 2 metals: synthesis, characterisation and redox behaviour.

Treatment of the 2,6-diiminopyridine, NC5H3{C(Ph)[double bond, length as m-dash]N(Dip)}2-2,6 (PhDimpy, Dip = 2,6-diisopropylphenyl) with [MgI2(OEt2)2] gives the adduct complex [(PhDimpy)MgI2] in which the PhDimpy ligand is neutral. This complex can be singly reduced by KC8 or a magnesium(i) complex to give [(PhDimpy˙)MgI], in which PhDimpy acts as a radical anion. Double reduction of [(PhDimpy)MgI2] in diethyl ether yields [(PhDimpy)Mg(OEt2)], in which the magnesium centre is ligated by dianionic [PhDimpy]2-. [(PhDimpy)Mg(OEt2)] can alternatively be prepared by the simple, high yielding reaction between PhDimpy and activated magnesium. A comproportionation reaction occurs between [(PhDimpy)MgI2] and [(PhDimpy)Mg(OEt2)], leading to the quantitative formation of [(PhDimpy˙)MgI]. The heavier group 2 metal dimeric complexes [{(PhDimpy)M}2] (M = Ca, Sr, Ba) can be similarly accessed by reaction of PhDimpy with the activated metal, or by KC8 reduction of in situ generated [(PhDimpy)MI2] (M = Ca, Sr). All prepared complexes have been characterised by X-ray crystallography and NMR spectroscopy. Electrochemical investigations into the complexes incorporating [PhDimpy]2- ligands reveal that they can undergo quasi-reversible 1- and 2-electron reduction processes, quasi-reversible 1-electron oxidations, and largely irreversible 2-electron oxidation events. These studies suggest that the compounds hold promise as soluble reducing agents in organic and inorganic synthesis.

Engineering high-energy-density sodium battery anodes for improved cycling with superconcentrated ionic-liquid electrolytes.

Non-uniform metal deposition and dendrite formation in high-density energy storage devices reduces the efficiency, safety and life of batteries with metal anodes. Superconcentrated ionic-liquid electrolytes (for example 1:1 ionic liquid:alkali ion) coupled with anode preconditioning at more negative potentials can completely mitigate these issues, and therefore revolutionize high-density energy storage devices. However, the mechanisms by which very high salt concentration and preconditioning potential enable uniform metal deposition and prevent dendrite formation at the metal anode during cycling are poorly understood, and therefore not optimized. Here, we use atomic force microscopy and molecular dynamics simulations to unravel the influence of these factors on the interface chemistry in a sodium electrolyte, demonstrating how a molten-salt-like structure at the electrode surface results in dendrite-free metal cycling at higher rates. Such a structure will support the formation of a more favourable solid electrolyte interphase, accepted as being a critical factor in stable battery cycling. This new understanding will enable engineering of efficient anode electrodes by tuning the interfacial nanostructure via salt concentration and high-voltage preconditioning.

Solvent Engineering of a Dopant-Free Spiro-OMeTAD Hole-Transport Layer for Centimeter-Scale Perovskite Solar Cells with High Efficiency and Thermal Stability.

High efficiency and environmental stability are mandatory performance requirements for commercialization of perovskite solar cells (PSCs). Herein, efficient centimeter-scale PSCs with improved stability were achieved by incorporating an additive-free 2,2',7,7'-tetrakis[N,N-di(p-methoxyphenyl)amino]-9,9'-spirobifluorene (spiro-OMeTAD) hole-transporting material (HTM) through simply substituting the usual chlorobenzene solvent with pentachloroethane (PC). A stabilized power conversion efficiency (PCE) of 16.1% under simulated AM 1.5G 1 sun illumination with an aperture of 1.00 cm2 was achieved for PSCs using an additive-free spiro-OMeTAD layer cast from PC. X-ray analysis suggested that chlorine radicals from PC transfer partially to spiro-OMeTAD and are retained in the HTM layer, resulting in conductivity improvement. Moreover, unencapsulated PSCs with a centimeter-scale active area cast from PC retained >70% of their initial PCE after ageing at 80 °C for 500 h, in contrast with less than 20% retention for control devices. Morphological and X-ray analyses of the aged cells revealed that the perovskite and HTM layers remain almost unchanged in the cells with a spiro-OMeTAD layer cast from PC whereas serious degradation occurred in the control cells. This study not only reveals the decomposition mechanism of PSCs in the presence of HTM additives but also opens up a broad range of organic semiconductors for radical doping.

Liquefied Sunshine: Transforming Renewables into Fertilizers and Energy Carriers with Electromaterials.

It has become apparent that renewable energy sources are plentiful in many, often remote, parts of the world, such that storing and transporting that energy has become the key challenge. For long-distance transportation by pipeline and bulk tanker, a liquid form of energy carrier is ideal, focusing attention on liquid hydrogen and ammonia. Development of high-activity and selectivity electrocatalyst materials to produce these energy carriers by reductive electrochemistry has therefore become an important area of research. Here, recent developments and challenges in the field of electrocatalytic materials for these processes are discussed, including the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the nitrogen reduction reaction (NRR). Some of the mis-steps currently plaguing the nitrogen reduction to ammonia field are highlighted. The rapidly growing roles that in situ/operando and quantum chemical studies can play in new electromaterials discovery are also surveyed.