Picosecond pulse amplification up to a peak power of 42 W by a quantum-dot tapered optical amplifier and a mode-locked laser emitting at 1.26 µm.

We experimentally study the generation and amplification of stable picosecond-short optical pulses by a master oscillator power-amplifier configuration consisting of a monolithic quantum-dot-based gain-guided tapered laser and amplifier emitting at 1.26 µm without pulse compression, external cavity, gain- or Q-switched operation. We report a peak power of 42 W and a figure-of-merit for second-order nonlinear imaging of 38.5 W2 at a repetition rate of 16 GHz and an associated pulse width of 1.37 ps.

Tapered InAs/InGaAs quantum dot semiconductor optical amplifier design for enhanced gain and beam quality.

In this Letter, a design for a tapered InAs/InGaAs quantum dot semiconductor optical amplifier is proposed and experimentally evaluated. The amplifier's geometry was optimized in order to reduce gain saturation effects and improve gain efficiency and beam quality. The experimental measurements confirm that the proposed amplifier allows for an elevated optical gain in the saturation regime, whereas a five-fold increase in the coupling efficiency to a standard single mode optical fiber is observed, due to the improvement in the beam quality factor M² of the emitted beam.

Dual-wavelength mode-locked quantum-dot laser, via ground and excited state transitions: experimental and theoretical investigation.

We report a dual-wavelength passive mode locking regime where picosecond pulses are generated from both ground (lambda = 1263 nm) and excited state transitions (lambda = 1180 nm), in a GaAs-based monolithic two-section quantum-dot laser. Moreover, these results are reproduced by numerical simulations which provide a better insight on the dual-wavelength mode-locked operation.