RESUMO
BACKGROUND: In this study, the authors present a modification of the arteriovenous loop model that combines extrinsic and intrinsic vascularization modes to enhance vascularization of bioartificial matrices. METHODS: An arteriovenous loop was created in the medial thighs of 24 rats. The loop was placed in a newly developed titanium chamber, which was fabricated with an electron beam melting facility, and was embedded in a hydroxyapatite/ß-tricalcium phosphate/fibrin matrix. At the explantation time points (2, 4, 6, and 8 weeks), constructs were perfused by differently colored dyes to determine the amount of tissue vascularized by either the intrinsic or the extrinsic vascular pathway. Specimens were investigated by means of micro-computed tomography and histologic and morphometric analysis. RESULTS: Although there was an equal number of blood vessels originating from the center and the periphery, 83 percent of all vessels displayed a connection to the arteriovenous loop already at 2 weeks. There was a continuous increase of the relative proportion of vessels connected to the arteriovenous loop over time detectable. At 8 weeks, communications between the newly formed vessels and the arteriovenous loop were visible in 97 percent of all vessels. CONCLUSIONS: This study demonstrates for the first time the enhancement of angiogenesis in an axially vascularized tissue by an additional extrinsic vascular pathway. By 2 weeks, both pathways showed connections, allowing transplantation of the entire construct using the arteriovenous loop pedicle. This approach will allow for reduction of the time interval between arteriovenous loop implantation and transplantation into the defect site and limitation of operative interventions.
Assuntos
Derivação Arteriovenosa Cirúrgica , Vasos Sanguíneos/crescimento & desenvolvimento , Neovascularização Fisiológica/fisiologia , Engenharia Tecidual/métodos , Animais , Artéria Femoral/cirurgia , Veia Femoral/cirurgia , Hidroxiapatitas , Masculino , Perfusão , Próteses e Implantes , Ratos , Ratos Endogâmicos Lew , Engenharia Tecidual/instrumentação , Titânio , Microtomografia por Raio-XRESUMO
It appears that most models for micro-structured materials with auxetic deformations were found by clever intuition, possibly combined with optimization tools, rather than by systematic searches of existing structure archives. Here we review our recent approach of finding micro-structured materials with auxetic mechanisms within the vast repositories of planar tessellations. This approach has produced two previously unknown auxetic mechanisms, which have Poisson's ratio νss=-1 when realized as a skeletal structure of stiff incompressible struts pivoting freely at common vertices. One of these, baptized Triangle-Square Wheels, has been produced as a linear-elastic cellular structure from Ti-6Al-4V alloy by selective electron beam melting. Its linear-elastic properties were measured by tensile experiments and yield an effective Poisson's ratio νLE≈-0.75, also in agreement with finite element modeling. The similarity between the Poisson's ratios νSS of the skeletal structure and νLE of the linear-elastic cellular structure emphasizes the fundamental role of geometry for deformation behavior, regardless of the mechanical details of the system. The approach of exploiting structure archives as candidate geometries for auxetic materials also applies to spatial networks and tessellations and can aid the quest for inherently three-dimensional auxetic mechanisms.
Assuntos
Manufaturas/análise , Ligas/química , Elasticidade , Modelos Moleculares , Estresse Mecânico , Titânio/químicaRESUMO
Highly porous titanium structures are widely used for maxillofacial and orthopedic surgery because of their excellent mechanical properties similar to those of human bone and their facilitation of bone ingrowth. In contrast to common methods, the generation of porous titaniumproducts by selective electron beam melting (SEBM), an additive manufacturing technology, overcomes difficulties concerning the extreme chemical affinity of liquid titanium to atmospheric gases which consequently leads to strongly reduced ductility of the metal. The purpose of this study was to assess the suitability of a smooth compact and a porous Ti-6Al-4V structure directly produced by the SEBM process as scaffolds for bone formation. SEBM-processed titanium implants were placed into defects in the frontal skull of 15 domestic pigs. To evaluate the direct contact between bone and implant surfaces and to assess the ingrowth of osseous tissue into the porous structure, microradiographs and histomorphometric analyses were performed 14, 30, and 60 days after surgery. Bone ingrowth increased significantly during the period of this study. After 14 days the most outer regions of the implants were already filled with newly formed bone tissue (around 14%). After 30 days the bone volume inside the implants reached almost 30% and after 60 days abundant bone formation inside the implants attained 46%. During the study only scarce bone-implant contact was found around all implants, which did not exceed 9% around compact specimens and 6% around porous specimens after 60 days. This work demonstrates that highly porous titanium implants with excellent interconnectivity manufactured using the SEBM method are suitable scaffolds for bone ingrowth. This technique is a good candidate for orthopedic and maxillofacial applications.
Assuntos
Elétrons , Teste de Materiais/métodos , Titânio/farmacologia , Ligas , Animais , Regeneração Óssea/efeitos dos fármacos , Osso e Ossos/efeitos dos fármacos , Osso e Ossos/patologia , Microscopia Eletrônica de Varredura , Tamanho do Órgão/efeitos dos fármacos , Osteogênese/efeitos dos fármacos , Porosidade/efeitos dos fármacos , Próteses e Implantes , Coloração e Rotulagem , Sus scrofa , Cloreto de Tolônio/metabolismoRESUMO
Selective electron beam melting (SEBM) was successfully used to fabricate novel cellular Ti-6Al-4V structures for orthopaedic applications. Micro computer tomography (microCT) analysis demonstrated the capability to fabricate three-dimensional structures with an interconnected porosity and pore sizes suitable for tissue ingrowth and vascularization. Mechanical properties, such as compressive strength and elastic modulus, of the tested structures were similar to those of human bone. Thus, stress-shielding effects after implantation might be avoided due to a reduced stiffness mismatch between implant and bone. A chemical surface modification using HCl and NaOH induced apatite formation during in vitro bioactivity tests in simulated body fluid under dynamic conditions. The modified bioactive surface is expected to enhance the fixation of the implant in the surrounding bone as well as to improve its long-term stability.
Assuntos
Substitutos Ósseos/química , Cristalização/métodos , Titânio/química , Ligas , Elétrons , Temperatura Alta , Teste de Materiais , Tamanho da Partícula , Porosidade , Propriedades de SuperfícieRESUMO
The aim of the study was to assess the suitability of different Ti-6Al-4V surfaces produced by the electron beam melting (EBM) process as matrices for attachment, proliferation, and differentiation of human fetal osteoblasts (hFOB 1.19). Human osteoblasts were cultured in vitro on smooth and rough-textured Ti-6Al-4V alloy disks. By means of cell number and vitality and SEM micrographs cell attachment and proliferation were observed. The differentiation rate was examined by using quantitative real-time PCR analysis for the gene expression of alkaline phosphatase (ALP), type I collagen (Coll-I), bone sialoprotein (BSP) and osteocalcin (OC). After 3 days of incubation there was a significant higher vitality (p < 0.02) and proliferation (p < 0.02) of hFOB cells on smooth surfaces (R(a) = 0.077 microm) and compact surfaces with adherent partly molten titanium particles on the surface (R(a) = 24.9 microm). On these samples cells spread over almost the whole surface. On porous surfaces with higher R(a) values, cell proliferation was reduced significantly. Quantitative real-time PCR analysis showed that the expression of osteogenic differentiation markers was not influenced by surface characteristics. Gene expression did not differ more than twofold for the different samples. Compact titanium samples with adherent partly molten titanium particles on the surface (R(a) = 24.9 microm) fabricated by the EBM process turned out to be best suited for cell proliferation, while highly rough surfaces (R(a) >/= 56.9 microm) reduced proliferation of hFOB cells. Surface characteristics of titanium can easily be changed by EBM in order to further improve proliferation.