Surface plasmon-enhanced photo-driven CO2 hydrogenation by hydroxy-terminated nickel nitride nanosheets.

The majority of visible light-active plasmonic catalysts are often limited to Au, Ag, Cu, Al, etc., which have considerations in terms of costs, accessibility, and instability. Here, we show hydroxy-terminated nickel nitride (Ni3N) nanosheets as an alternative to these metals. The Ni3N nanosheets catalyze CO2 hydrogenation with a high CO production rate (1212 mmol g-1 h-1) and selectivity (99%) using visible light. Reaction rate shows super-linear power law dependence on the light intensity, while quantum efficiencies increase with an increase in light intensity and reaction temperature. The transient absorption experiments reveal that the hydroxyl groups increase the number of hot electrons available for photocatalysis. The in situ diffuse reflectance infrared Fourier transform spectroscopy shows that the CO2 hydrogenation proceeds via the direct dissociation pathway. The excellent photocatalytic performance of these Ni3N nanosheets (without co-catalysts or sacrificial agents) is suggestive of the use of metal nitrides instead of conventional plasmonic metal nanoparticles.

Insights into the CO2 Capture Characteristics within the Hierarchical Pores of Carbon Nanospheres Using Small-Angle Neutron Scattering.

Understanding adsorption processes at the molecular level has transformed the discovery of engineered materials for maximizing gas storage capacity and kinetics in adsorption-based carbon capture applications. In this work, we studied the molecular mechanism of gas (CO2, H2, methane, and ethane) adsorption inside an interconnected porous network of carbon. This was achieved by synthesizing novel macro-meso-microporous carbon (M3C) nanospheres with interconnected pore structures. The M3Cs showed a CO2 capture capacity of 5.3 mmol/g at atmospheric CO2 pressure, with excellent kinetics. This was due to fast CO2 adsorption within the interconnected hierarchical macro-meso-microporous M3C. In situ small-angle neutron scattering (SANS) under various CO2 pressures indicated that the macro- and mesopores of M3C enable fast diffusion of CO2 molecules inside the micropores, where adsorbed CO2 molecules densify into a liquid-like state. This strong densification of CO2 molecules causes fast CO2 diffusion in the macro- and mesopores of M3C, restarting the adsorption cycle for fresh CO2 molecules until all pores are completely filled. Notably, M3C also showed good capture capacities for hydrogen and various hydrocarbons, with excellent selectivity toward ethane over methane.

Construction of a 2D/2D g-C3N5/NiCr-LDH Heterostructure to Boost the Green Ammonia Production Rate under Visible Light Illumination.

Photocatalytic N2 fixation has emerged as one of the most useful ways to produce NH3, a useful asset for chemical industries and a carbon-free energy source. Recently, significant progress has been made toward designing efficient photocatalysts to achieve this objective. Here, we introduce a highly active type-II heterojunction fabricated via integrating two-dimensional (2D) nanosheets of exfoliated g-C3N5 with nickel-chromium layered double hydroxide (NiCr-LDH). With an optimized loading of NiCr-LDH on exfoliated g-C3N5, excellent performance is realized for green ammonia synthesis under ambient conditions without any noble metal cocatalyst(s). Indeed, the g-C3N5/NiCr-LDH heterostructure with 2 wt % of NiCr-LDH (CN-NCL-2) exhibits an ammonia yield of about 2.523 mmol/g/h, which is about 7.51 and 2.86 times higher than that of solo catalysts, i.e., NiCr-LDH (NC-L) and exfoliated g-C3N5 (CN-5), respectively, where methanol is used as a sacrificial agent. The enhancement of NH3 evolution by the g-C3N5/NiCr-LDH heterostructure can be attributed to the efficient charge transfer, a key factor to the photocatalytic N2 fixation rate enhancement. Additionally, N2 vacancies present in the system help adsorb N2 on the surface, which improves the ammonia production rate further. The best-performing heterostructure also shows long-term stability with the NH3 production rate remaining nearly constant over 20 h, demonstrating the excellent robustness of the photocatalyst.

Polyethylenimine assisted non-monotonic jamming of colloids during evaporation induced assembly and its implication on CO2 sorption characteristics.

We report a detailed study of hierarchically organized silica-polyethylenimine (PEI) microspheres achieved through evaporation-induced assembly. Due to complex interactions between oppositely-charged silica nanoparticles and PEI, non-monotonic jamming of the colloidal particles is manifested. With an increase in the polymer concentration, the local volume fraction of the silica particles decreases from 0.68 to 0.43 and then increases to 0.55 with further increase. The unusual jamming behaviour of the silica colloids in the presence of PEI provides an avenue for immobilizing PEI without reducing the porosity and specific area in contrast to the conventional impregnation approach. The resultant composite microspheres show good thermal stability and CO2 sorption characteristics. For a 33 wt% PEI loading, the microspheres exhibit a significant CO2 capture capacity of 65 mg g-1 even at room temperature and it is increased to 90 mg g-1 at 75 °C. The variation in the CO2 capture capacity at 0 °C as a function of PEI loading also demonstrated the signature of non-monotonicity owing to the structural modification in the silica-PEI microspheres. The composite microspheres demonstrated fast adsorption kinetics reaching 70% of the total capture capacity in one minute during the CO2 capture. The CO2 cycling adsorption-desorption studies showed good regeneration capability up to 20 cycles.

Visible Light-Driven Highly Selective CO2 Reduction to CH4 Using Potassium-Doped g-C3N5.

Establishment of an efficient and robust artificial photocatalytic system to convert solar energy into chemical fuels through CO2 conversion is a cherished goal in the fields of clean energy and environmental protection. In this work, we have explored an emergent low-Z nitrogen-rich carbon nitride material g-C3N5 (analogue of g-C3N4) for CO2 conversion under visible light illumination. A significant enhancement of the CH4 production rate was detected for g-C3N5 in comparison to that of g-C3N4. Notably, g-C3N5 also showed a very impressive selectivity of 100% toward CH4 as compared to 21% for g-C3N4. The photocatalytic CO2 conversion was performed without using sacrificial reagents. We found that 1% K doping in g-C3N5 enhanced its performance even further without compromising the selectivity. Moreover, 1% K-doped g-C3N5 also exhibited better photostability than undoped g-C3N5. We have also employed density functional theory calculation-based analyses to understand and elucidate the possible reasons for the better photocatalytic performance of K-doped g-C3N5.