Synthesis, X-ray Studies and Photophysical Properties of Iridium(III) Complexes Incorporating Functionalized 2,2':6',2″ Terpyridines and 2,6-Bis(thiazol-2-yl)pyridines.

A series of iridium(III) triimine complexes incorporating 2,2':6',2″-terpyridine (terpy) and 2,6-bis(thiazol-2-yl)pyridine (dtpy) derivatives were successfully designed and synthesized to investigate the impact of the peripheral rings (pyridine, thiazole) and substituents (thiophene, bithiophene, EDOT) attached to the triimine skeleton on their photophysical properties. The Ir(III) complexes were fully characterized using IR, 1H, elemental analysis and single crystal X-ray analysis. Their thermal properties were evaluated using TGA measurements. Photoluminescence spectra of [IrCl3L1-6] were investigated in solution at 298 and 77 K. The experimental studies were accompanied by DFT/TDDFT calculations. The photophysical properties of the synthesized triimine ligands and Ir(III) complexes were studied in detail by electronic absorption and emission. In solution, they exhibited photoluminescence quantum yields ranging from 1.27% to 5.30% depending on the chemical structure. The experimental research included DFT/TDDFT calculations. The photophysical properties of the synthesized triimine ligands and Ir(III) complexes were conducted using electronic absorption and emission techniques. In solution, they displayed photoluminescence quantum yields ranging from 1.27% to 5.30% depending on the chemical structure.

Oligopeptide-based molecular labelling of (bio)degradable polyester biomaterials.

Nowadays, a very important motivation for the development of new functional materials for medical purposes is not only their performance but also whether they are environmentally friendly. In recent years, there has been a growing interest in the possibility of labelling (bio)degradable polymers, in particular those intended for specific applications, especially in the medical sector, and the potential of information storage in such polymers, making it possible, for example, to track the ultimate environmental fate of plastics. This article presents a straightforward green approach that combines both aspects using an oligopeptide, which is an integral part of polymer material, to store binary information in a physical mixture of polymer and oligopeptide. In the proposed procedure the year of production of polymer films made of poly(l-lactide) (PLLA) and a blend of poly(1,4-butylene adipate-co-1,4-butylene terephthalate) and polylactide (PBAT/PLA) were encoded as the sequence of the appropriate amino acids in the oligopeptide (PEP) added to these polymers. The decoding of the recorded information was carried out using mass spectrometry technique as a new method of decoding, which enabled the successful retrieval and reading of the stored information. Furthermore, the properties of labelled (bio)degradable polymer films and stability during biodegradation of PLLA/PEP film under industrial composting conditions have been investigated. The labelled films exhibited good oligopeptide stability, allowing the recorded information to be retrieved from a green polymer/oligopeptide system before and after biodegradation. The MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay) study of the PLLA and PLLA/PBAT using the MRC-5 mammalian fibroblasts was presented for the first time.

Effect of N-phenyl substituent on thermal, optical, electrochemical and luminescence properties of 3-aminophthalimide derivatives.

The seven N-phthalimide derivatives substituted with the amine group at the 3-C position in the phenylene ring were synthesized. The effect of N-substituent chemical structure was investigated. The thermal, electrochemical and optical studies were performed and supported by the density functional theory calculations (DFT). The electrochemical investigations of the synthesized low-molecular phthalimides revealed the one oxidation and reduction process with the HOMO energy level under - 5.81 eV and energy-band gap below 3 eV. The N-phthalimide derivatives were emitted light in a blue spectral region in solutions (in polar and non-polar) with the quantum yield between 2 and 68%, dependent on the substituent at the nitrogen atom, solvent and concentration. The N-phthalimide derivatives were emissive also in a solid state as a thin film and powder. They were tested as a component of the active layer with PVK:PBD matrix and as an independent active layer in the organic light-emitting diodes. The registered electroluminescence spectra exhibited the maximum emission band in the 469-505 nm range, confirming the possibility of using N-phthalimides with PVK:PBD matrix as the blue emitters.

Naphthalene Phthalimide Derivatives as Model Compounds for Electrochromic Materials.

Electrochromism of organic compounds is a well-known phenomenon; however, nowadays, most research is focused on anodic coloring materials. Development of efficient, cathodic electrochromic materials is challenging due to the worse stability of electron accepting materials compared with electron donating ones. Nevertheless, designing stable cathodic coloring organic materials is highly desired-among other reasons-to increase the coloration performance. Hence, four phthalimide derivatives named 1,5-PhDI, 1,4-PhDI, 2,6-PhDI and 3,3'-PhDI were synthesized and analyzed in depth. In all cases, two imide groups were connected via naphthalene (1,5-PhDI, 1,4-PhDI, 2,6-PhDI) or 3,3'-dimethylnaphtidin (3,3'-PhDI) bridge. To observe the effect of chemical structure on physicochemical properties, various positions of imide bond were considered, namely, 1,5- 1,4- and 2,6-. Additionally, a compound with the pyromellitic diimide unit capped with two 1-naphtalene substituents was obtained. All compounds were studied in terms of their thermal behavior, using differential calorimetry (DSC) and thermogravimetric analysis (TGA). Moreover, electrochemical (CV, DPV) and spectroelectrochemical (UV-Vis and EPR) analyses were performed to evaluate the obtained materials in terms of their application as cathodic electrochromic materials. All obtained materials undergo reversible electrochemical reduction which leads to changes in their optical properties. In the case of imide derivatives, absorption bands related to both reduced and neutral forms are located in the UV region. However, importantly, the introduction of the 3,3'-dimethylnaphtidine bridge leads to a noticeable bathochromic shift of the reduced form absorption band of 3,3'-PhDI. This indicates that optimization of the phthalimide structure allows us to obtain stable, cathodic electrochromic materials.

Controlling of Photophysical Behavior of Rhenium(I) Complexes with 2,6-Di(thiazol-2-yl)pyridine-Based Ligands by Pendant π-Conjugated Aryl Groups.

The structure-property correlations and control of electronic excited states in transition metal complexes (TMCs) are of high significance for TMC-based functional material development. Within these studies, a series of Re(I) carbonyl complexes with aryl-substituted 2,6-di(thiazol-2-yl)pyridines (Arn-dtpy) was synthesized, and their ground- and excited-state properties were investigated. A number of condensed aromatic rings, which function as the linking mode of the aryl substituent, play a fundamental role in controlling photophysics of the resulting [ReCl(CO)3(Arn-dtpy-κ2N)]. Photoexcitation of [ReCl(CO)3(Arn-dtpy-κ2N)] with 1-naphthyl-, 2-naphthyl-, 9-phenanthrenyl leads to the population of 3MLCT. The lowest triplet state of Re(I) chromophores bearing 9-anthryl, 2-anthryl, 1-pyrenyl groups is ligand localized. The rhenium(I) complex with appended 1-pyrenyl group features long-lived room temperature emission attributed to the equilibrium between 3MLCT and 3IL/3ILCT. The excited-state dynamics in complexes [ReCl(CO)3(9-anthryl-dtpy-κ2N)] and [ReCl(CO)3(2-anthryl-dtpy-κ2N)] is strongly dependent on the electronic coupling between anthracene and {ReCl(CO)3(dtpy-κ2N)}. Less steric hindrance between the chromophores in [ReCl(CO)3(2-anthryl-dtpy-κ2N)] is responsible for the faster formation of 3IL/3ILCT and larger contribution of 3ILCTanthracene→dtpy in relation to the isomeric complex [ReCl(CO)3(9-anthryl-dtpy-κ2N)]. In agreement with stronger electronic communication between the aryl and Re(I) coordination centre, [ReCl(CO)3(2-anthryl-dtpy-κ2N)] displays room-temperature emission contributed to by 3MLCT and 3ILanthracene/3ILCTanthracene→dtpy phosphorescence. The latter presents rarely observed phenomena in luminescent metal complexes.

Six New Unsymmetrical Imino-1,8-naphthalimide Derivatives Substituted at 3-C Position-Photophysical Investigations.

In this research, six novel unsymmetrical imino-1,8-naphthalimides (AzNI) were synthesized. Comprehensive thermal (thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), optical (UV-Vis, photoluminescence), and electrochemical (CV, DPV) studies were carried out to characterize these new compounds. The molecules showed the onset of thermal decomposition in the temperature range 283-372 °C and molecular glass behavior. Imino-1,8-naphthalimides underwent reduction and oxidation processes with the electrochemical energy band gap (Eg) below 2.41 eV. The optical properties were evaluated in solvents with different polarities and in the solid-state as a thin films and binary blends with poly(N-vinylcarbazole): (2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole) (PVK:PBD). Presented compounds emitted blue light in the solutions and in the green or violet spectral range in the solid-state. Their ability to emit light under external voltage was examined. The devices with guest-host structure emitted light with the maximum located in the blue to red spectral range of the electroluminescence band (EL) depending on the content of the AzNI in the PVK:PBD matrix (guest-host structure).

Spectroscopic and Physicochemical Investigations of Azomethines with Triphenylamine Core towards Optoelectronics.

Three new azomethines based on triphenylamine with two or three substituents were obtained. Chemical structure and purity were confirmed by 1H NMR, FTIR elemental analysis and mass spectroscopy. The investigations were focused on the relationship between chemical structure and properties important for optoelectronic materials. Thus, the studies of thermal, optical and electrochemical properties were carried out based on differential scanning calorimetry, thermogravimetric analysis, electronic absorption, photoluminescence and cyclic voltammetry measurements. The ongoing consideration of experimental results was complemented by theoretical calculations using the density functional theory method. The donor activity of obtained compounds was tested in bulk-heterojuntion photovoltaic cells with structure ITO/PEDOT:PSS/imine:PCBM/Al and ITO/PEDOT:PSS/imine:P3HT:PCBM/Al). The effect of the presence of the amino-thiophene-3,4-dicarboxylic acid diethyl ester groups and various number of hexyloxyphenyl units on imines properties was demonstrated.

Impact of the Anthryl Linking Mode on the Photophysics and Excited-State Dynamics of Re(I) Complexes [ReCl(CO)3(4'-An-terpy-κ2N)].

Rhenium(I) complexes with 2,2':6',2″-terpyridines (terpy) substituted with 9-anthryl (1) and 2-anthryl (2) were synthesized, and the impact of the anthryl linking mode on the ground- and excited-state properties of resulting complexes [ReCl(CO)3(4'-An-terpy-κ2N)] (An─anthryl) was investigated using a combination of steady-state and time-resolved optical techniques accompanied by theoretical calculations. Different attachment positions of anthracene modify the overlap between the molecular orbitals and thus the electronic coupling of the anthracene and {ReCl(CO)3(terpy-κ2N)} chromophores. Following the femtosecond transient absorption, the lowest triplet excited state of both complexes was found to be localized on the anthracene chromophore. The striking difference between 1 and 2 concerns the triplet-state formation dynamics. A more planar geometry of 2-anthryl-terpy (2), and thus better electronic communication between the anthracene and {ReCl(CO)3(terpy-κ2N)} chromophores, facilitates the formation of the 3An triplet state. In steady-state photoluminescence spectra, the population ratio of 3MLCT and 3An was found to be dependent not only on the anthryl linking mode but also on solvent polarity and excitation wavelengths. In dimethyl sulfoxide (DMSO), compounds 1 and 2 excited with λexc > 410 nm show both 3MLCT and 3An emissions, which are rarely observed. Additionally, the abilities of the designed complexes for 1O2 generation and light emission under the external voltage were preliminary examined.

Novel Azocoumarin Derivatives-Synthesis and Characterization.

The paper presents synthesis and characterization of nine new thiazolyl-(phenyldiazenyl)-2H-chromen-2-one dyes. The impact of substituent structure in thiazole ring in the synthesized azocoumarin derivatives on electrochemical properties, photoisomerization process and photovoltaic response was examined. The dyes were electrochemically active and undergo reduction and oxidation processes. They showed low electrochemically estimated energy band gap in the range of 1.71-2.13 eV. Photoisomerization process of the synthesized molecules was studied in various solvents such as ethanol, chloroform and N,N-dimethylformamide (DMF) upon the UV illumination. It was found that novel azodyes showed reversible trans-cis-trans isomerization and exhibited long thermal back to the trans form, that was even 7 days in DMF. Selected azocoumarin were molecularly dispersed in polystyrene for preparation of guest-host azopolymer systems to study the cis-trans thermal isomerization of obtained dyes in solid state. The photovoltaic activity of the azochromophores was tested in bulk-heterojunction solar cells. They acting as weak donors in device with structure ITO/PEDOT:PSS/dye:PC70BM/Al. No photovoltaic response of cells with azocoumarin derivatives bearing 4-fluorobenzene, 3,4-dichlorobenzene, or 4-(1-adamantyl) unit was found. Additionally, dye which showed the best activity was examined in three-component solar cells ITO/PEDOT:PSS/PTB7:PC70BM:dye/PFN/Al.

In-Depth Studies of Ground- and Excited-State Properties of Re(I) Carbonyl Complexes Bearing 2,2':6',2″-Terpyridine and 2,6-Bis(pyrazin-2-yl)pyridine Coupled with π-Conjugated Aryl Chromophores.

In the current work, comprehensive photophysical and electrochemical studies were performed for eight rhenium(I) complexes incorporating 2,2':6',2″-terpyridine (terpy) and 2,6-bis(pyrazin-2-yl)pyridine (dppy) with appended 1-naphthyl-, 2-naphthyl-, 9-phenanthrenyl, and 1-pyrenyl groups. Naphthyl and phenanthrenyl substituents marginally affected the energy of the MLCT absorption and emission bands, signaling a weak electronic coupling of the appended aryl group with the Re(I) center. The triplet MLCT state in these complexes is so low lying relative to the triplet 3ILaryl that the thermal population of the triplet excited state delocalized on the organic chromophore is ineffective. The attachment of the electron-rich pyrenyl group resulted in a noticeable red shift and a significant increase in molar absorption coefficients of the lowest energy absorption of the resulting Re(I) complexes due to the contribution of intraligand charge-transfer (ILCT) transitions occurring from the pyrenyl substituent to the terpy/dppy core. At 77 K, the excited states of [ReCl(CO)3(Ln-κ2N)] with 1-pyrenyl-functionalized ligands were found to have predominant 3ILpyrene/3ILCTpyrene→terpy character. The 3IL/3ILCT nature of the lowest energy excited state of [ReCl(CO)3(4'-(1-pyrenyl)-terpy-κ2N)] was also evidenced by nanosecond transient absorption and time-resolved emission spectroscopy. Enhanced room-temperature emission lifetimes of the complexes [ReCl(CO)3(Ln-κ2N)] with 1-pyrenyl-substituted ligands are indicative of the thermal activation between 3MLCT and 3IL/3ILCT excited states. Deactivation pathways occurring upon light excitation in [ReCl(CO)3(4'-(1-naphthyl)-terpy-κ2N)] and [ReCl(CO)3(4'-(1-pyrenyl)-terpy-κ2N)] were determined by femtosecond transient absorption studies.

Luminescence and Electrochemical Activity of New Unsymmetrical 3-Imino-1,8-naphthalimide Derivatives.

A new series of 1,8-naphtalimides containing an imine bond at the 3-position of the naphthalene ring was synthesized using 1H, 13C NMR, FTIR, and elementary analysis. The impact of the substituent in the imine linkage on the selected properties and bioimaging of the synthesized compounds was studied. They showed a melting temperature in the range of 120-164 °C and underwent thermal decomposition above 280 °C. Based on cyclic and differential pulse voltammetry, the electrochemical behavior of 1,8-naphtalimide derivatives was evaluated. The electrochemical reduction and oxidation processes were observed. The compounds were characterized by a low energy band gap (below 2.60 eV). Their photoluminescence activities were investigated in solution considering the solvent effect, in the aggregated and thin film, and a mixture of poly(N-vinylcarbazole) (PVK) and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt.%). They demonstrated low emissions due to photoinduced electron transport (PET) occurring in the solution and aggregation, which caused photoluminescence quenching. Some of them exhibited light emission as thin films. They emitted light in the range of 495 to 535 nm, with photoluminescence quantum yield at 4%. Despite the significant overlapping of its absorption range with emission of the PVK:PBD, incomplete Förster energy transfer from the matrix to the luminophore was found. Moreover, its luminescence ability induced by external voltage was tested in the diode with guest-host configuration. The possibility of compound hydrolysis due to the presence of the imine bond was also discussed, which could be of importance in biological studies that evaluate 3-imino-1,8-naphatalimides as imaging tools and fluorescent materials for diagnostic applications and molecular bioimaging.

New Acceptor-Donor-Acceptor Systems Based on Bis-(Imino-1,8-Naphthalimide).

In this paper, six novel symmetrical bis-(imino-1,8-naphthalimides) differing in core and N-substituent structure were synthesized, and their thermal (TGA, DSC), optical (UV-Vis, PL), electrochemical (DPV, CV) properties were evaluated. The compounds were stable to 280 °C and could be transferred into amorphous materials. Electrochemical investigations showed their ability to occur reductions and oxidations processes. They exhibited deep LUMO levels of about -3.22 eV and HOMO levels above -5.80 eV. The optical investigations were carried out in the solutions (polar and non-polar) and in films and blends with PVK:PBD. Bis-(imino-1,8-naphthalimides) absorbed electromagnetic radiation in the range of 243-415 nm and emitted light from blue to yellow. Their capacity for light emission under voltage was preliminarily tested in devices with an active layer consisting of a neat compound and a blend with PVK:PBD. The diodes emitted green or red light.

Carbazole effect on ground- and excited-state properties of rhenium(i) carbonyl complexes with extended terpy-like ligands.

The ground- and excited-state properties of three novel complexes [ReCl(CO)3(Ln-κ2N)] bearing 2,2':6',2''-terpyridine, 2,6-di(thiazol-2-yl)pyridine and 2,6-di(pyrazin-2-yl)pyridine functionalized with 9-carbazole attached to the central pyridine ring of the triimine core via phenylene linkage were investigated by spectroscopic and electrochemical methods and were simulated using density functional theory (DFT) and time-dependent DFT. To get a deeper and broader understanding of structure-property relationships, the designed Re(i) carbonyl complexes were compared with previously reported analogous systems - without any groups attached to the phenyl ring and bearing pyrrolidine instead of 9-carbazole. The results indicated that attachment of the N-carbazolyl substituent to the triimine core has less influence on the nature of the triplet excited state of [ReCl(CO)3(Ln-κ2N)] than the pyrrolidine group. Additionally, the impact of the ligand structural modifications on the light emission of the Re(i) complexes under external voltage was preliminarily examined with electroluminescence spectra of diodes containing the synthesized new molecules in an active layer.

Facile production of ultra-fine silicon nanoparticles.

A facile procedure for the synthesis of ultra-fine silicon nanoparticles without the need for a Schlenk vacuum line is presented. The process consists of the production of a (HSiO1.5) n sol-gel precursor based on the polycondensation of low-cost trichlorosilane (HSiCl3), followed by its annealing and etching. The obtained materials were thoroughly characterized after each preparation step by electron microscopy, Fourier transform and Raman spectroscopy, X-ray dispersion spectroscopy, diffraction methods and photoluminescence spectroscopy. The data confirm the formation of ultra-fine silicon nanoparticles with controllable average diameters between 1 and 5 nm depending on the etching time.

Photoluminescence enhancement of Re(i) carbonyl complexes bearing D-A and D-π-A ligands.

Three Re(i) carbonyl complexes [ReCl(CO)3(Ln)] bearing 2,2'-bipyridine, 2,2':6',2''-terpyridine, and 1,10-phenanthroline functionalized with diphenylamine/or triphenylamine units (L1-L3) were synthesized to explore the impact of highly electron donating units appended to the imine ligand on the thermal and optoelectronic properties of Re(i) systems. Additionally, for comparison, the ligands L1-3 and parent complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)] were investigated. The thermal stability was evaluated by differential scanning calorimetry. The ground- and excited-state electronic properties of the Re(i) complexes were studied by cyclic voltammetry and differential pulse voltammetry, absorption and emission spectroscopy, as well as using density-functional theory (DFT). The majority of the compounds form amorphous molecular materials with high glass transition temperatures above 100 °C. Compared to the unsubstituted complexes [ReCl(CO)3(bipy)], [ReCl(CO)3(phen)] and [ReCl(CO)3(terpy-κ2N)], the HOMO-LUMO gap of the corresponding Re(i) systems bearing modified imine ligands is reduced, and the decrease in the value of the ΔEH-L is mainly caused by the increase in HOMO energy level. In relation to the parent complexes, all designed Re(i) carbonyls were found to show enhanced photoluminescence, both in solution and in solid state. The investigated ligands and complexes were also preliminarily tested as luminophores in light emitting diodes with the structures ITO/PEDOT:PSS/compound/Al and ITO/PEDOT:PSS/PVK:PBD:compound/Al. The pronounced effect of the ligand chemical structure on electroluminescence ability was clearly visible.

Towards better understanding of photophysical properties of rhenium(I) tricarbonyl complexes with terpy-like ligands.

Series of Re(I) carbonyls complexes were designed and synthesized to explore the impact of the triimine skeleton and number of methoxy groups attached to aryl substituents on their optoelectronic and thermal properties. The chemical structures of the prepared complexes were confirmed by 1H and 13C NMR spectroscopy, HR-MS, elemental anlsysis, and X-ray measurements. DSC measuremtns showed that they melted in the range of 198-325 °C. Some of them form stable molecular glasses with high glass transition temperatures (158-173 °C). Experimentally obtained optical properties were supported by DFT calculations. The UV-Vis spectra display a series of overlapping absorption bands in the range 200-350 nm, and much weaker broad band in the visible spectral region, due to intraligand and charge transfer transitions, respectively. All synthesized complexes were emissive in solution and in solid state as powder. Moreover, when applied in diodes, some of them exhibited ability for emission of light under external voltage with maximum of electroluminescence band located at 591-630 nm.

Effect of thienyl units in cyanoacrylic acid derivatives toward dye-sensitized solar cells.

A series of heterocyclic donor-acceptor systems were synthesized and well characterized by using 1H, 13C NMR, FT-IR, and elemental analysis. They were designed to investigate the effect of thiophene and cyanoacrylic acid number units on the thermal, optical, electrochemical and finally photovoltaic properties of dye-sensitized solar cells prepared with the selected compounds. The effect of chemical structure on their properties was demonstrated. They showed the beginning of thermal decomposition between 230 and 270 °C. The compounds absorbed the radiation in the range of 300-500 nm or 200-400 nm. They were electrochemically active and varied in energy band gap from 3.40 to 1.58 eV. Additionally, their optimized geometry, HOMO-LUMO levels, ionization potential, and electron affinity were evaluated using density functional theory. The photovoltaic devices based on TiO2 sensitized with the obtained molecules exhibited low power conversion efficiency, which was the highest for the device containing the symmetrical molecule with bithiophene structure. Under co-sensitization, the cell made of the same compound gave significant enhancement of efficiency of 6.3% being higher to that of the individual device prepared from dye N719 (5.75%). Moreover, the effects of immersion time of TiO2 electrode in the dye solution and co-sensitization methods were tested. The surface morphology of photoanode was investigated using atomic force microscopy.

Thermal, spectroscopic, electrochemical, and electroluminescent characterization of malononitrile derivatives with triphenylamine structure.

Three push-pull molecules with linear, quadrupolar and tripodal arrangements, consisting of triphenylamine (electro-donor) substituted with malononitrile groups (electro-acceptor), were synthesized with high yield by a simple procedure. Impact of the number of malononitrile substituents on optoelectronic properties was investigated with cyclic voltammetry, absorption and emission spectroscopy, as well as density functional theory calculation. The derivatives formed amorphous materials and exhibited low energy band gaps ranging from 2.06 to 2.49 eV. UV-Vis absorption and photoluminescence emission spectra were investigated in solutions (CHCl3, NMP) and in solid-state as thin films and two kinds of blends (with PMMA and PVK:PBD). Quantum yield of photoluminescence was dependent on the molecule structure, solvent, and solid-state layer formulation. The compounds exhibited high photoluminescence quantum yield in the range of 15-42% and 12-59% in solid-state as film and blend with PMMA (1 wt%), respectively, being promising for applications in light emitting diodes. The diodes with active layer consisting of neat derivatives and compounds molecularly dispersed in PVK:PBD (50:50 wt%) matrix showed orange and green electroluminescence.

NCN-Coordinating Ligands based on Pyrene Structure with Potential Application in Organic Electronics.

Five novel derivatives of pyrene, substituted at positions 1,3,6,8 with 4-(2,2-dimethylpropyloxy)pyridine (P1), 4-decyloxypyridine (P2), 4-pentylpyridine (P3), 1-decyl-1,2,3-triazole (P4), and 1-benzyl-1,2,3-triazole (P5), are obtained through a Suzuki-Miyaura cross-coupling reaction or CuI -catalyzed 1,3-dipolar cycloaddition reaction, respectively, and characterized thoroughly. TGA measurements reveal the high thermal stability of the compounds. Pyrene derivatives P1-P5 all show photoluminescence (PL) quantum yields (Φ) of approximately 75 % in solution. Solid-state photo- and electroluminescence characteristics of selected compounds as organic light-emitting diodes are tested. In the guest-host configuration, two matrixes, that is, poly(N-vinylcarbazole) (PVK) and a binary matrix consisting of PVK and 2-tert-butylphenyl-5-biphenyl-1,3,4-oxadiazole (PBD) (50:50 wt %), are applied. The diodes show red, green, or blue electroluminescence, depending on both the compound chemical structure and the actual device architecture. In addition, theoretical studies (DFT and TD-DFT) provide a deeper understanding of the experimental results.

Synthesis, spectroscopic, electrochemical and computational studies of rhenium(i) tricarbonyl complexes based on bidentate-coordinated 2,6-di(thiazol-2-yl)pyridine derivatives.

Nine rhenium(i) complexes possessing three carbonyl groups together with a bidentate coordinated 2,6-di(thiazol-2-yl)pyridine derivative were synthesized to examine the impact of structure modification of the triimine ligand on the photophysical, thermal and electrochemical properties of [ReCl(CO)3(4-Rn-dtpy-κ2N)]. The Re(i) complexes were fully characterized using IR, 1H and 13C, HRMS-ESI and single crystal X-ray analysis. Their thermal properties were evaluated using DSC and TGA measurements. Photoluminescence spectra of [ReCl(CO)3(4-Rn-dtpy-κ2N)] were investigated in solution and in the solid state, at 298 and 77 K. Both emission wavelengths and quantum yields of [ReCl(CO)3(4-Rn-dtpy-κ2N)] were found to be structure-related, demonstrating a crucial role of the substituent attached to the 2,6-di(thiazol-2-yl)pyridine skeleton. In order to fully understand the photophysical properties of [ReCl(CO)3(4-Rn-dtpy-κ2N)], density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations were performed. Furthermore, the complexes which showed appropriate solubility in chloroform were tested as an emissive active layer in OLED devices.