Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 3 de 3
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
J Synchrotron Radiat ; 25(Pt 4): 1162-1171, 2018 Jul 01.
Artigo em Inglês | MEDLINE | ID: mdl-29979178

RESUMO

A major limitation to the use of coherent X-ray diffraction imaging (CXDI) for imaging soft materials like polymers and biological tissue is that the radiation can cause extensive damage to the sample under investigation. In this study, CXDI has been used to monitor radiation-induced structural changes in metal-coated poly(methyl methacrylate) microspheres. Using a coherent undulator X-ray beam with 8.10 keV photon energy, 14 tomograms at a resolution of ∼30 nm were measured consecutively, which resulted in an accumulated dose of 30 GGy. The three-dimensional images confirmed that the polymer core was strongly affected by the absorbed dose, giving pronounced mass loss. Specifically, as the metal-polymer composite was exposed to the X-ray beam, a bubble-like region of reduced density grew within the composite, almost filling the entire volume within the thin metallic shell in the last tomogram. The bubble seemed to have its initiation point at a hole in the metal coating, emphasizing that the free polymer surface plays an important role in the degradation process. The irradiation of an uncoated polystyrene microsphere gave further evidence for mass loss at the free surface as the radius decreased with increased dose. The CXDI study was complemented by X-ray photon correlation spectroscopy, which proved efficient in establishing exposure dose limits. Our results demonstrate that radiation-induced structural changes at the tens of nanometer scale in soft materials can be followed as a function of dose, which is important for the further development of soft-matter technology.

2.
Opt Express ; 24(10): 10710-22, 2016 May 16.
Artigo em Inglês | MEDLINE | ID: mdl-27409892

RESUMO

Characterization of the wavefront of an X-ray beam is of primary importance for all applications where coherence plays a major role. Imaging techniques based on numerically retrieving the phase from interference patterns are often relying on an a-priori assumption of the wavefront shape. In Coherent X-ray Diffraction Imaging (CXDI) a planar incoming wave field is often assumed for the inversion of the measured diffraction pattern, which allows retrieving the real space image via simple Fourier transformation. It is therefore important to know how reliable the plane wave approximation is to describe the real wavefront. Here, we demonstrate that the quantitative wavefront shape and flux distribution of an X-ray beam used for CXDI can be measured by using a micrometer size metal-coated polymer sphere serving in a similar way as the hole array in a Hartmann wavefront sensor. The method relies on monitoring the shape and center of the scattered intensity distribution in the far field using a 2D area detector while raster-scanning the microsphere with respect to the incoming beam. The reconstructed X-ray wavefront was found to have a well-defined central region of approximately 16 µm diameter and a weaker, asymmetric, intensity distribution extending 30 µm from the beam center. The phase front distortion was primarily spherical with an effective radius of 0.55 m which matches the distance to the last upstream beam-defining slit, and could be accurately represented by Zernike polynomials.

3.
PLoS One ; 11(7): e0158345, 2016.
Artigo em Inglês | MEDLINE | ID: mdl-27367796

RESUMO

Optimizing the morphology of bulk heterojunctions is known to significantly improve the photovoltaic performance of organic solar cells, but available quantitative imaging techniques are few and have severe limitations. We demonstrate X-ray ptychographic coherent diffractive imaging applied to all-organic blends. Specifically, the phase-separated morphology in bulk heterojunction photoactive layers for organic solar cells, prepared from a 50:50 blend of poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) and thermally treated for different annealing times is imaged to high resolution. Moreover, using a fast-scanning calorimetry chip setup, the nano-morphological changes caused by repeated thermal annealing applied to the same sample could be monitored. X-ray ptychography resolves to better than 100 nm the phase-segregated domains of electron donor and electron acceptor materials over a large field of view within the active layers. The quantitative phase contrast images further allow us to estimate the local volume fraction of PCBM across the photovoltaically active layers. The volume fraction gradient for different regions provides insight on the PCBM diffusion across the depletion zone surrounding PCBM aggregates. Phase contrast X-ray microscopy is under rapid development, and the results presented here are promising for future studies of organic-organic blends, also under in situ conditions, e.g., for monitoring the structural stability during UV-Vis irradiation.


Assuntos
Nanotecnologia/métodos , Difração de Raios X/métodos , Difusão , Fontes de Energia Elétrica , Fulerenos/química , Energia Solar , Tiofenos/química , Raios X
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...