Investigation on Filaments for 3D Printing of Nasal Septum Cartilage Implant.

Septoplasty is a widely used method in treating deviated septum. Although it is successfully implemented, there are problems with excessive bleeding, septal perforation, or infections. The use of anatomically shaped implants could help overcome these problems. This paper focuses on assessing the possibility of the usage of a nasal septum cartilage implant 3D printed from various market-available filaments. Five different types of laments were used, two of which claim to be suitable for medical use. A combination of modeling, mechanical (bending, compression), structural (FTIR), thermal (DSC, MFR), surface (contact angle), microscopic (optical), degradation (2 M HCl, 5 M NaOH, and 0.01 M PBS), printability, and cell viability (MTT) analyses allowed us to assess the suitability of materials for manufacturing implants. Bioflex had the most applicable properties among the tested materials, but despite the overall good performance, cell viability studies showed toxicity of the material in MTT test. The results of the study show that selected filaments were not suitable for nasal cartilage implants. The poor cell viability of Bioflex could be improved by surface modification. Further research on biocompatible elastic materials for 3D printing is needed either by the synthesis of new materials or by modifying existing ones.

Numerical and clinical analysis of an eyeball injuries under direct impact.

OBJECTIVES: The objective of this study was to develop a numerical model of the eyeball and orbit to simulate a blunt injury to the eyeball leading to its rupture, as well as to conduct a comparative analysis of the results obtained using the finite element method against the clinical material concerning patients who had suffered an eyeball rupture due to a blunt force trauma. MATERIAL AND METHODS: Using available sclera biometric and strength data, a numerical model of the eyeball, the orbital contents, and the bony walls were developed from the ground up. Then, 8 different blunt force injury scenarios were simulated. The results of numerical analyses made it possible to identify possible locations and configurations of scleral rupture. The obtained results were compared against the clinical picture of patients hospitalized at the Department of Ophtalmology, Medical University of Gdansk in 2010-2016 due to isolated blunt force trauma to the eyeball. RESULTS: It has been demonstrated that the extent of damage observed on the numerical model that indicated a possible location of eyeball rupture did not differ from the clinically observed configurations of the scleral injuries. It has been found that the direction of the impact applied determines the location of eyeball rupture. Most often the rupture occurs at the point opposite to the clock-hour/positions of the impact application. The eyeball rupture occurs in the first 7-8 ms after the contact with the striking rigid object. It has been established that the injuries most often affected the upper sectors of the eyeball. Men are definitely more likely to sustain such injuries. Eyeball ruptures lead to significant impairment of visual acuity. CONCLUSIONS: This study may contribute to a better understanding of injury mechanisms and better treatment planning. It may also contribute to the development of eyeball protection methods for employees exposed to ocular injuries. Int J Occup Med Environ Health. 2023;36(2):263-73.

Numerical analysis of the ostiomeatal complex aeration using the CFD method.

We aimed to analyse ostiomeatal complex (OMC) aeration using the computational fluid dynamics (CFD) method of simulation based on human craniofacial computed tomography (CT) scans. The analysis was based on CT images of 2 patients: one with normal nose anatomy and one with nasal septal deviation (NSD). The Reynolds-Average Simulation approach and turbulence model based on linear eddy viscosity supplemented with the two-equation k-[Formula: see text] SST model were used for the CFD simulation. As a result, we found differences in airflow velocity through the ostiomeatal complex in patients with a normal nose and those with NSD. In a patient with NSD, the flow is turbulent in contrast to the normal nose (laminar flow). A faster (more intensive) airflow through the OMC was observed in the wider nasal cavity of the patient with NSD than on the narrower side. In addition, we want to emphasise the higher speed of airflow through the apex uncinate process area towards the ostiomeatal complex during exhalation, which, in the presence of secretions in the nose, predisposes to its easier penetration into the sinuses of the anterior group.

Proteomic analysis of sialoliths from calcified, lipid and mixed groups as a source of potential biomarkers of deposit formation in the salivary glands.

Salivary stones, also known as sialoliths, are formed in a pathological situation in the salivary glands. So far, neither the mechanism of their formation nor the factors predisposing to their formation are known despite several hypotheses. While they do not directly threaten human life, they significantly deteriorate the patient's quality of life. Although this is not a typical research material, attempts are made to apply various analytical tools to characterise sialoliths and search for the biomarkers in their proteomes. In this work, we used mass spectrometry and SWATH-MS qualitative and quantitative analysis to investigate the composition and select proteins that may contribute to solid deposits in the salivary glands. Twenty sialoliths, previously characterized spectroscopically and divided into the following groups: calcified (CAL), lipid (LIP) and mixed (MIX), were used for the study. Proteins unique for each of the groups were found, including: for the CAL group among them, e.g. proteins from the S100 group (S100 A8/A12 and P), mucin 7 (MUC7), keratins (KRT1/2/4/5/13), elastase (ELANE) or stomatin (STOM); proteins for the LIP group-transthyretin (TTR), lactotransferrin (LTF), matrix Gla protein (MPG), submandibular gland androgen-regulated protein 3 (SMR3A); mixed stones had the fewest unique proteins. Bacterial proteins present in sialoliths have also been identified. The analysis of the results indicates the possible role of bacterial infections, disturbances in calcium metabolism and neutrophil extracellular traps (NETs) in the formation of sialoliths.

Correlation of ENT Symptoms with Age, Sex, and Anti-SARS-CoV-2 Antibody Titer in Plasma.

Our objective is to evaluate the correlation between ENT symptom occurrence and antibody titer in convalescent plasma, as well as the influence of age and gender on ENT manifestations of COVID-19. We measured the levels of antibodies in 346 blood donors, who had PCR-confirmed previous infection and met the study inclusion criteria. We recorded otolaryngological symptoms during infection: dry cough, dyspnea, sore throat, smell/taste disturbances, vertigo, dizziness, nausea and vomiting, sudden unilateral loss of hearing, progressive loss of hearing, and tinnitus. In addition, we statistically analyzed the correlation between patients' antibody levels, symptoms, age, and gender using a chi-square test or Fisher exact test. A p-value less than 0.05 determined statistical significance. The mean age of the convalescents was 39.8 ± 9.56 SD and the median of the measured anti-SARS-CoV2 plasma antibodies was 1:368.5. The most common ENT symptoms were smell/taste disturbances (62.43%), dry cough (40.46%), sore throat (24.86%), and dyspnea (23.7%). Smell and taste disturbances were more frequent in younger patients and the marked antibody titer was lower, which was contrary to a higher antibody titer associated with dry cough, dyspnea, and dizziness. Occurrence of sore throat was not correlated with age, sex, or antibody level. There were no significant differences in otological symptoms in female patients. Gender does not affect the occurrence of ENT symptoms. The symptomatic course of SARS-CoV-2 infection is not always associated with higher levels of antibodies in the blood. The age of the infected patients, unlike gender, affects the occurrence of some ENT symptoms.

Maxillary sinus aeration analysis using computational fluid dynamics.

The maxillary sinus aeration using the computational fluid dynamics (CFD) method based on individual adult patients' computed tomography (CT) scans were analyzed. The analysis was based on CT images of 4 patients: one with normal nose anatomy and three with nasal septal deviation (NSD) and concha bullosa (CB). The CFD simulation was performed using the Reynolds-Average Simulation approach and turbulence closure based on linear eddy viscosity supplemented with the two-equation k-[Formula: see text] SST model. As a result, it was found that the lower part of NSD has the most significant impact on the airflow change within the maxillary sinuses compared to CB and the upper part of NSD. In a healthy nose, the airflow in the sinuses is continuous, while NSD and CB change this flow into pulsatile. Multiple changes in the direction of flow during one respiratory phase were observed. The flow intensity within the maxillary sinus opening is lower on the NSD side. The concept of vorticity measure is introduced to evaluate and compare various patients qualitatively. Typically, the lowest values of such measures are obtained for healthy airways and the highest for pathological changes in the nasal cavity.

Assessment of anti-SARS-CoV-2 antibodies level in convalescents plasma.

Despite extensive vaccination, the quantity of patients infected with the SARS-CoV-2 virus and its variants continues to grow worldwide. Treating patients with a severe course of COVID-19 is a difficult challenge. One of the generally accepted and specific therapy methods is the use of plasma rich in anti-SARS-CoV-2 antibodies. On the other hand, assessing the antibodies level depending on the time after infection allows for vaccine-decision. The study marked the level of anti-SARS-CoV-2 IgG antibodies in 351 COVID-19 convalescent residents of one geographical region in Poland. The study group included blood donors. The studies were cross-sectional and extended to a questionnaire to determine infection severity. These data were compiled statistically. The study considered epidemiological factors, the time from the end of the infection, and infection severity. The fastest increase of the antibodies level was observed up to 59 days after COVID-19, and it was statistically significantly higher among men. Higher levels of antibodies were found among people above the average age in both men and women. There was an increase in the level of antibodies since the onset of the disease in men, while in women, it decreased. The antibodies level was also found to depend on the severity of the course of COVID-19 infection. The optimal group of plasma donors in the studied geographical region is men and women above 39 years old. after a more severe infection. The titer of antibodies increases with time from the disease.

Tensile modulus of human orbital wall bones cut in sagittal and coronal planes.

In the current research, 68 specimens of orbital superior and/or medial walls taken from 33 human cadavers (12 females, 21 males) were subjected to uniaxial tension untill fracture. The samples were cut in the coronal (38 specimens) and sagittal (30 specimens) planes of the orbital wall. Apparent density (ρapp), tensile Young's modulus (E-modulus) and ultimate tensile strength (UTS) were identified. Innovative test protocols were used to minimize artifacts and analyze the obtained data: (1) grips dedicated to non-symmetrical samples clamping were applied for mechanical testing, (2) non-contact measuring system of video-extensometer was employed for displacement registration, (3) ink imprint technique coupled with CAD analysis was applied to precisely access the cross-sectional areas of tested samples. With regard to a pooled group, apparent density for the coronal and sagittal cut plane was equal 1.53 g/cm3 and 1.57 g/cm3, tensile Young's modulus 2.36 GPa and 2.14 GPa, and ultimate tensile strength 12.66 MPa and 14.35 MPa, respectively. No significant statistical differences (p > 0.05) were found for all the analyzed parameters when comparing coronal and sagittal plane cut groups. These observations confirmed the hypothesis that direction of sample cut does not affect the mechanical response of the orbital wall tissue, thus suggesting that mechanical properties of orbital wall bone show isotropic character.

Trial Proteomic Qualitative and Quantitative Analysis of the Protein Matrix of Submandibular Sialoliths.

Our studies aimed to explore the protein components of the matrix of human submandibular gland sialoliths. A qualitative analysis was carried out based on the filter aided sample preparation (FASP) methodology. In the protein extraction process, we evaluated the applicability of the standard demineralization step and the use of a lysis buffer containing sodium dodecyl sulfate (SDS) and dithiothreitol (DTT). The analysis of fragmentation spectra based on the human database allowed for the identification of 254 human proteins present in the deposits. In addition, the use of multi-round search in the PEAKS Studio program against the bacterial base allowed for the identification of 393 proteins of bacterial origin present in the extract obtained from sialolith, which so far has not been carried out for this biological material. Furthermore, we successfully applied the SWATH methodology, allowing for a relative quantitative analysis of human proteins present in deposits. The obtained results correlate with the classification of sialoliths proposed by Tretiakow. The performed functional analysis allowed for the first time the selection of proteins, the levels of which differ between the tested samples, which may suggest the role of these proteins in the calcification process in different types of sialoliths. These are preliminary studies, and drawing specific conclusions requires research on a larger group, but it provides us the basis for the continuation of the work that has already begun.

Mitigation effect of face shield to reduce SARS-CoV-2 airborne transmission risk: Preliminary simulations based on computed tomography.

We aimed to develop a model to quantitatively assess the potential effectiveness of face shield (visor) in reducing airborne transmission risk of the novel coronavirus SARS-CoV-2 during the current COVID-19 pandemic using the computational fluid dynamics (CFD) method. The studies with and without face shield in both an infected and healthy person have been considered in indoor environment simulation. In addition to the influence of the face shield and the synchronization of the breathing process while using the device, we also simulated the effect of small air movements on the SARS-CoV-2 infection rate (outdoor environment simulation). The contact with infectious particles in the case without a face shield was 12-20 s (s), in the presence of at least one person who was positive for SARS-CoV-2. If the infected person wore a face shield, no contact with contaminated air was observed during the entire simulation time (80 s). The time of contact with contaminated air (infection time) decreases to about 11 s when the surrounding air is still and begins to move at a low speed. Qualitative differences between simulations performed on the patients with and without the face shield are clearly visible. The maximum prevention of contagion is probably a consequence of wearing a face shield by an infected person. Our results suggest that it is possible to determine contact with air contaminated by SARS-CoV-2 using the CFD method under realistic conditions for virtually any situation and configuration. The proposed method is probably the fastest and most reliable among those based on CFD-based techniques.

[Can the SARS-CoV-2 virus damage human hearing and balance?] / Czy wirus SARS-CoV-2 moze uszkadzac sluch i równowage?

In 2019, COVID-19, the disease caused by the SARS-CoV-2 virus, evolved into a pandemic which is still going on. The basic clinical symptoms of the SARS-CoV-2 infection are: fever, dry cough, fatigue, muscle pain, respiratory problems, and the loss of smell or taste. Other symptoms, including those related to hearing and balance organs (hearing loss, tinnitus, dizziness), are reported less frequently by patients. They are especially rarely reported as the first symptoms of this infection. In order to answer the question of whether SARS-CoV-2 can cause hearing and balance damage, the authors reviewed the literature sources from 2019-2020 included in EMBASE and PubMed, entering the following words: "hearing loss," "COVID-19," "coronavirus," "sensorineural hearing loss," "vertigo," and "dizziness." Ultimately, 9 studies on the possible relationship between hearing impairment and SARS-CoV-2, and 4 studies on the possible relationship between damage to the balance and SARS-CoV-2, were qualified for the study. The results of the analysis suggest a possible relationship between COVID-19 and hearing loss, with no evidence of a similar relationship between this virus and the balance system. The possible existence of such a relationship should be especially remembered by hospital emergency room doctors, otolaryngologists and audiologists, especially as regards the possibility of a sudden sensironeural hearing loss as the first symptom of COVID-19. This also applies to doctors of other specialties. The authors indicate the need for further, intensive and multifaceted research on this issue. Med Pr. 2021;72(3):321-5.

Validation of Hydraulic Mechanism during Blowout Trauma of Human Orbit Depending on the Method of Load Application.

The more we know about mechanisms of the human orbital blowout type of trauma, the better we will be able to prevent them in the future. As long as the buckling mechanism's veracity is not in doubt, the hydraulic mechanism is not based on equally strong premises. To investigate the correctness of the hydraulic mechanism's theory, two different methods of implementation of the hydraulic load to the finite element method (FEM) model of the orbit were performed. The intraorbital hydraulic pressure was introduced as a face load applied directly to the orbit in the first variant, while in the second one the load was applied to the orbit indirectly as a set of nodal forces transferred from the external surface of the eyeball via the intraorbital tissues to the orbital walls within the contact problem. Such an approach is aimed at a better understanding of the pattern for the formation of blowout fractures during the indirect load applied to the orbital bones. The nonlinear dynamic analysis of both numerical models showed that the potential fracture was observed in the second variant only, embracing a relatively large area: both medial and lower wall of the orbit. Interestingly, the pressure generated by the intraorbital entities transferred the energy of the impact to the orbital sidewalls mainly; thus, the nature of the mechanism known as the hydraulic was far from the expected hydraulic pressure. According to the eyeball's deformation as well as the areas of the greatest Huber-Mises-Hencky (H-M-H) stress within the orbit, a new term of strut mechanism was proposed instead of the hydraulic mechanism as more realistic regarding the investigated phenomenon. The results of the current research may strongly influence the development of modern implantology as well as affect forensic medicine.