The Effect of Different Thermal Treatment on the Allotropic fcc↔hcp Transformation and Compression Behavior of Polycrystalline Cobalt.

Pure polycrystalline cobalt is systematically thermally treated in order to assess the effect of the microstructure on the compression behavior. Isothermal annealing of the as-drawn material leads to recrystallization and grain growth dependent on the annealing temperature (600-1100 ∘C). Consequently, the yield strength decreases and the fracture strain increases as a function of rising grain size; the content of the residual fcc phase is ~6-11%. Subsequent thermal cycling around the transition temperature is applied to further modify the microstructure, especially in terms of the fcc phase content. With the increasing number of cycles, the grain size further increases and the fraction of the fcc phase significantly drops. At the same time, the values of both the yield strength and fracture strain somewhat decrease. An atypical decrease in the fracture strain as a function of grain size is explained in terms of decreasing fcc phase content; the stress-induced fcc→hcp transformation can accommodate a significant amount of plastic strain. Besides controlling basic material parameters (e.g., grain size and texture), adjusting the content of the fcc phase can thus provide an effective means of mechanical performance optimization with respect to particular applications.

Transformation Pathway upon Heating of Metastable ß Titanium Alloy Ti-15Mo Investigated by Neutron Diffraction.

A transformation pathway during thermal treatment of metastable ß Ti-15Mo alloy was investigated by in situ neutron diffraction. The evolution of individual phases α , ß , and ω was investigated during linear heating with two heating rates of 1.9 ∘ C / min and 5 ∘ C / min and during aging at 450 ∘ C . The results showed that with a sufficient heating rate (5 ∘ C / min in this case), the ω phase dissolves before the α phase forms. On the other hand, for the slower heating rate of 1.9 ∘ C / min , a small temperature interval of the coexistence of the α and ω phases was detected. Volume fractions and lattice parameters of all phases were also determined.

Anomalous X-ray diffraction from ω nanoparticles in ß-Ti(Mo) single crystals.

Anomalous X-ray diffraction (AXRD) is a technique which makes use of effects occurring near the energy of an absorption edge of an element present in the studied sample. The intensity of the diffracted radiation exhibits an anomalous decrease when the primary beam energy matches the energy needed to excite an electron from an atomic orbital. The characteristics of this step are sensitive to the concentration of the `anomalous' element and its spatial distribution in the sample. In the present investigation, AXRD was employed to study ω particles in a metastable ß titanium alloy Ti-15Mo (in wt%). The experiments were done in an energy range around the Mo K edge at 20.0 keV, allowing investigation of the distribution of Mo in the material, which is rejected from the volume of ω particles during their diffusion-driven growth. This paper deals with diffuse scattering patterns around the (006)ß diffraction maximum. It was observed that different regions of the diffuse scattering exhibited different variations of diffracted intensity with the incident photon energy near the absorption edge. Numerical simulations of diffuse scattering patterns as well as of energy dependences of the scattered intensity were performed. It was found that the observed patterns and their dependence on the primary beam energy can be explained by taking into account (a) elastic deformation of the ß matrix arising from the presence of slightly misfitting ω particles and (b) the presence of a `cloud' of a higher Mo concentration around ω particles.