Interfacial Interaction in MeOx/MWNTs (Me-Cu, Ni) Nanostructures as Efficient Electrode Materials for High-Performance Supercapacitors.

Due to their unique physical and chemical properties, complex nanostructures based on carbon nanotubes and transition metal oxides are considered promising electrode materials for the fabrication of high-performance supercapacitors with a fast charge rate, high power density, and long cycle life. The crucial role in determining their efficiency is played by the properties of the interface in such nanostructures, among them, the type of chemical bonds between their components. The complementary theoretical and experimental methods, including dispersion-corrected density functional theory (DFT-D3) within GGA-PBE approximation, scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, X-ray photoelectron, and X-ray absorption spectroscopies, were applied in the present work for the comprehensive investigation of surface morphology, structure, and electronic properties in CuOx/MWCNTs and NiOx/MWCNTs. As a result, the type of interfacial interaction and its correlation with electrochemical characteristics were determined. It was found that the presence of both Ni-O-C and Ni-C bonds can increase the contact between NiO and MWCNTs, and, through this, promote electron transfer between NiO and MWCNTs. For NiOx/MWCNTs, better electrochemical characteristics were observed than for CuOx/MWCNTs, in which the interfacial interaction is determined only by bonding through Cu-O-C bonds. The electrochemical properties of CuOx/MWCNTs and NiOx/MWCNTs were studied to demonstrate the effect of interfacial interaction on their efficiency as electrode materials for supercapacitor applications.

Recent Trends in Supercapacitor Research: Sustainability in Energy and Materials.

Supercapacitors (SCs) have emerged as critical components in applications ranging from transport to wearable electronics due to their rapid charge-discharge cycles, high power density, and reliability. This review offers an analysis of recent strides in supercapacitor research, emphasizing pivotal developments in sustainability, electrode materials, electrolytes, and 'smart SCs' designed for modern microelectronics with attributes such as flexibility, stretchability, and biocompatibility. Central to this discourse are two dominant electrode materials: carbon materials (CMs), primarily in electric double layer capacitors (EDLCs), and pseudocapacitive materials, involving oxides/hydroxides, chalcogenides, metal-organic frameworks, conductive polymers and metal nitrides such as MXene. Despite EDLCs' historical use, challenges such as low energy density persist, with heteroatom introduction into the carbon lattice seen as a solution. Concurrently, pseudocapacitive materials dominate recent studies, with efficiency enhancement strategies, such as the creation of hybrids based on different types of materials, surface structural engineering and doping, under exploration. Electrolyte innovation, especially the shift towards gel polymer electrolytes for flexible SCs, and the harmonization of electrode materials with SC designs are highlighted. Emphasis is given to smart SCs with novel attributes such as self-charging, self-healing, biocompatibility, and environmentally conscious designs. In summary, the article underscores the drive in sustainable supercapacitor research to achieve high energy and power density, steering towards SCs that are efficient and versatile and involving bioderived/biocompatible SC materials. This brief review is based on selected recent references, offering depth combined with an accessible overview of the SC landscape.

Asphaltene-Stabilized Polyisobutylene Pressure-Sensitive Adhesives for Ultraviolet Protection and Surface Bonding.

The usual way to protect indoor areas from solar UV radiation is to use UV-absorbing materials, which are applied as a thin film on the surface of the windowpane. Asphaltenes are useless wastes from crude oil refining that absorb UV radiation well, which gave the idea of their use in protective coatings. Pressure-sensitive adhesives based on polyisobutylene containing from 5 to 30 wt% of asphaltenes were obtained. Deterioration of the adhesive properties with the introduction of 5-20 wt% of asphaltenes was shown by adhesion tests, which can be associated with the plasticization of the polymer matrix. At the same time, the use of 30 wt% of asphaltenes leads to the polymer matrix reinforcement with the restoration of adhesive properties to the original level or even slightly higher. The rheological study of adhesives at 25 °C and 120 °C showed the structural network formation by asphaltenes at a content of 30 wt%, explaining the increase in adhesion performance. According to microscopy, asphaltenes are flat brown glass shards in a polymer matrix. They absorb electromagnetic radiation, predominantly in the UV range, while maintaining relative translucency in the visible range. This makes it possible to obtain thin films from the asphaltene-filled adhesive for bonding glass sheets to produce UV-blocked and tinted windowpanes.

"Liquid-To-Solid" Conversion of Biomass Wastes Enhanced by Uniform Nitrogen Doping for the Preparation of High-Value-Added Carbon Materials for Energy Storage with Superior Characteristics.

Sustainable human development urgently calls for decreasing the cost of energy storage. Continuous massive consumption of dedicated carbon electrode materials with complex internal molecular architectures requires rethinking both the source of materials and the process of their production. Finding an efficient sustainable solution is focused on the reuse and development of waste processing into corresponding high-value-added carbon materials. The processing of solid wastes into solid value-added carbon materials ("solid-to-solid") is relatively well developed but can be a two-stage process involving carbon architecture rearrangement and heteroatom doping. Processing liquid wastes into high-value-added solid material ("liquid-to-solid") is typically much more challenging with the need for different production equipment. In the present study, a new approach is developed to bypass the difficulty in the "liquid-to-solid" conversion and simultaneously built in the ability for heteroatom doping within one production stage. Polycondensation of liquid humins waste with melamine (as a nitrogen-containing cross-linking component) results in solidification with preferential C and N atomic arrangements. For subsequent thermochemical conversion of the obtained solidified wastes, complicated equipment is no longer required, and under simple process conditions, carbon materials for energy storage with superior characteristics were obtained. A complete sequence is reported in the present study, including liquid waste processing, nitrogen incorporation, carbon material production, structural study of the obtained materials, detailed electrochemical evaluation and real supercapacitor device manufacture and testing.

Recombinant Globular Domain of TcpA Pilin from Vibrio cholerae El Tor: Recovery from Inclusion Bodies and Structural Characterization.

The production of recombinant proteins in Escherichia coli cells is often hampered by aggregation of newly synthesized proteins and formation of inclusion bodies. Here we propose the use of transverse urea gradient electrophoresis (TUGE) in testing the capability of folding of a recombinant protein from inclusion bodies dissolved in urea. A plasmid encoding the amino acid sequence 55-224 of TcpA pilin (C-terminal globular domain: TcpA-C) from Vibrio cholerae El Tor enlarged by a His-tag on its N-terminus was expressed in E. coli cells. The major fraction (about 90%) of the target polypeptide was detected in cell debris. The polypeptide was isolated from the soluble fraction and recovered from inclusion bodies after their urea treatment. Some structural properties of the polypeptide from each sample proved identical. The refolding protocol was developed on the basis of TUGE data and successfully used for the protein large-scale recovery from inclusion bodies. Spectral, hydrodynamic, and thermodynamic characteristics of the recombinant TcpA recovered from inclusion bodies indicate the presence of a globular conformation with a pronounced secondary structure and a rigid tertiary structure, which is promising for the design of immunodiagnostics preparations aimed to assess the pilin level in different strains of V. cholerae and to develop cholera vaccines.

Hot-Melt and Pressure-Sensitive Adhesives Based on Styrene-Isoprene-Styrene Triblock Copolymer, Asphaltene/Resin Blend and Naphthenic Oil.

Asphaltene/resin blend (ARB) extracted from heavy crude oil was used to modify poly(styrene-block-isoprene-block-styrene) (SIS) to make it an adhesive. There were prepared double and triple mixtures containing 10-60% SIS, 10-40% ARB, and 10-50% naphthenic oil used as an additional plasticizer. The viscoelasticity of the mixtures at 25 °C and 120 °C was studied, their flow curves were obtained, and the temperature dependences of the loss tangent and the components of the complex modulus were measured. In addition, the mixtures were used as hot-melt adhesives (HMAs) and pressure-sensitive adhesives (PSAs) in the shear, peel, and pull-off tests of the adhesive bonds that they formed with steel. Both naphthenic oil and ARB act as plasticizers for SIS and make it sticky. However, only the combined use of ARB and the oil allows for achieving the best set of adhesive properties of the SIS-based mixture. High-quality HMA requires low oil content (optimal SIS/ARB/oil ratio is 50/40/10, pull-off adhesion strength (τt) of 1990 kPa), whereas a lot of the oil is needed to give SIS characteristics of a PSA (SIS/ARB/oil is 20/40/40, τt of 100 kPa). At the same time, the resulting PSA can be used as a hot-melt pressure-sensitive adhesive (HMPSA) that has many times lower viscosity than HMA (13.9 Pa·s versus 2640 Pa·s at 120 °C and 1 s-1) but provides a less strong adhesive bond (τt of 960 kPa).

Diagnostic Value of IgA Antibody Measurement in Tick-Borne Spotted Fever (Astrakhan Rickettsial Fever).

Tick-borne spotted fevers caused by Rickettsia occur worldwide. The symptoms of this bacterial infection are similar to those of viral infection, and thus, diagnostic accuracy has special clinical importance. One of the commonly used methods for the diagnosis of tick-borne spotted fever is enzyme-linked immunosorbent assay (ELISA), which is based on estimation of the presence of specific IgM antibodies in blood. However, IgA analysis has not been used for the diagnosis of rickettsial diseases thus far. We investigated the diagnostic value of IgA antibody determination using patient sera collected in the Astrakhan region of Russia, where an isolated site of Astrakhan rickettsial fever (ARF) caused by Rickettsia conorii subsp. caspia is located. Our investigation was performed on serum samples collected from 185 patients diagnosed with Astrakhan rickettsial fever from May to October 2019. Western blot analysis revealed that specific IgA antibodies, as well as IgM antibodies, from patient sera bind to high-molecular-weight pathogen proteins with similar masses. The obtained data show that the determination of IgM alone allows for serological confirmation of diagnosis in only 46.5% of cases but that the determination of both IgM and IgA increases this rate to 66.5%. Taken together, the findings show an important diagnostic value of IgA evaluation for tick-borne spotted fever rickettsiosis. IMPORTANCE Tick-borne spotted fevers caused by Rickettsia occur worldwide. The symptoms of this bacterial infection are similar to the symptoms of viral infection, and thus, diagnostic accuracy has special clinical importance. The most serious spotted fever group rickettsiosis is Rocky Mountain fever in the United States, which is caused by Rickettsia rickettsii, and disease complications can lead to hemiparesis, blindness, or amputation. Rickettsia conorii subsp. caspia causes a rickettsial spotted fever named Astrakhan rickettsial fever (ARF). One of the commonly used methods for the diagnosis of tick-borne spotted fevers is ELISA, which is based on estimation of the presence of specific IgM antibodies in blood, though IgA has not been used for the diagnosis of rickettsial diseases thus far. In this study, we showed that both IgA and IgM should be analyzed in the blood serum samples of patients to significantly enhance the accuracy of diagnostics of tick-borne spotted fever rickettsiosis.

Non-Isothermal Decomposition as Efficient and Simple Synthesis Method of NiO/C Nanoparticles for Asymmetric Supercapacitors.

A series of NiO/C nanocomposites with NiO concentrations ranging from 10 to 90 wt% was synthesized using a simple and efficient two-step method based on non-isothermal decomposition of Nickel(II) bis(acetylacetonate). X-ray diffraction (XRD) measurements of these NiO/C nanocomposites demonstrate the presence of ß-NiO. NiO/C nanocomposites are composed of spherical particles distributed over the carbon support surface. The average diameter of nickel oxide spheres increases with the NiO content and are estimated as 36, 50 and 205 nm for nanocomposites with 10, 50 and 80 wt% NiO concentrations, respectively. In turn, each NiO sphere contains several nickel oxide nanoparticles, whose average sizes are 7-8 nm. According to the tests performed using a three-electrode cell, specific capacitance (SC) of NiO/C nanocomposites increases from 200 to 400 F/g as the NiO content achieves a maximum of 60 wt% concentration, after which the SC decreases. The study of the NiO/C composite showing the highest SC in three- and two-electrode cells reveals that its SC remains almost unchanged while increasing the current density, and the sample demonstrates excellent cycling stability properties. Finally, NiO/C (60% NiO) composites are shown to be promising materials for charging quartz clocks with a power rating of 1.5 V (30 min).

New Bio-Based Furanic Materials Effectively Absorb Metals from Water and Exert Antimicrobial Activity.

Development of sustainable bio-based materials for removal of toxic contaminants from water is a high priority goal. Novel bio-based binary and ternary copolymers with enhanced ion-exchange, adsorption and antibacterial properties were obtained by using plant biomass-derived diallyl esters of furandicarboxylic acid (FDCA) as crosslinking agents and easily available vinyl monomers. The synthesized copolymer materials showed higher sorption capacities for NiII , CoII and CuII compared to the commercial ion-exchange resins, and they maintained their high metal adsorption capacities for over 10 cycles of regeneration. The synthesized copolymer gels containing 1-5 wt % of the crosslinker showed excellent water absorption capacities. The synthesized copolymers with 1 % crosslinker content showed swelling ratios high enough to also act as moisture absorbents. Synthesized copolymers with crosslinker content of 10 wt % performed as contact-active antibacterials by inhibiting the growth of Gram-positive (S. aureus) and Gram-negative bacteria (E. coli, K. pneumonia) in suspension tests.

Hyperhomocysteinemia and Endothelial Dysfunction in Multiple Sclerosis.

Endothelial dysfunction is recognized as one of the leading factors in the pathogenesis of diseases of the central nervous system of various etiologies. Numerous studies have shown the role of hyperhomocysteinemia in the development of endothelial dysfunction and the prothrombogenic state. The most important condition in the development of multiple sclerosis (MS) is a dysregulation of the blood-brain barrier (BBB) and transendothelial leukocyte migration. It has been proven that homocysteine also contributes to the damage of neurons by the mechanism of excitotoxicity and the induction of the apoptosis of neurons. These processes can be one of the factors of neurodegenerative brain damage, which plays a leading role in the progression of MS. This review describes the pleiotropic effect of homocysteine on these processes and its role in MS pathogenesis.

Data on the thermo-fluid simulation of open-cathode fuel cell stack depending on the location of the oxidizer/cooling supply system.

The content of this paper provides simulation data of the distribution of temperature fields, and oxidizer/cooling agent (air) flows in dependence with location of the oxidizer/cooling supply system in open-cathode polymer electrolyte membrane fuel cell (PEMFC) stack. The finite element method in Solid Works Simulation and Solid Works Flow Simulation software were used for bipolar plate strength calculation and thermo-fluid simulation of PEMFC stack with forced-air convection. The simulations were carried out for two variants of the oxidizer/cooling supply system location - at the entrance to the fuel cell stack (air injection) and at the outlet of the fuel cell stack (air intake).

First detection of tick-borne encephalitis virus in Ixodes ricinus ticks and their rodent hosts in Moscow, Russia.

Here, we report the first confirmed autochthonous tick-borne encephalitis case diagnosed in Moscow in 2016 and describe the detection of tick-borne encephalitis virus (TBEV) in ticks and small mammals in a Moscow park. The paper includes data from two patients who were bitten by TBEV-infected ticks in Moscow city; one of these cases led to the development of the meningeal form of TBE. Both TBEV-infected ticks attacked patients in the same area. We collected ticks and trapped small mammals in this area in 2017. All samples were screened for the presence of pathogens causing tick-borne diseases by PCR. The TBEV-positive ticks and small mammals' tissue samples were subjected to virus isolation. The sequencing of the complete polyprotein gene of the positive samples was performed. A total of 227 questing ticks were collected. TBEV was detected in five specimens of Ixodes ricinus. We trapped 44 small mammals, mainly bank voles (Myodes glareolus) and pygmy field mice (Apodemus uralensis). Two samples of brain tissue from bank voles yielded a positive signal in RT-PCR for TBEV. We obtained six virus isolates from the ticks and brain tissue of a bank vole. Complete genome sequencing showed that the obtained isolates belong to the European subtype and have low diversity with sequence identities as high as 99.9%. GPS tracking showed that the maximum distance between the exact locations where the TBEV-positive ticks were collected was 185 m. We assume that the forest park had been free of TBEV and that the virus was recently introduced.

Sustainable Utilization of Biomass Refinery Wastes for Accessing Activated Carbons and Supercapacitor Electrode Materials.

Biomass processing wastes (humins) are anticipated to become a large-tonnage solid waste in the near future, owing to the accelerated development of renewable technologies based on utilization of carbohydrates. In this work, the utility of humins as a feedstock for the production of activated carbon by various methods (pyrolysis, physical and chemical activation, or combined approaches) was evaluated. The obtained activated carbons were tested as potential electrode materials for supercapacitor applications and demonstrated combined micro- and mesoporous structures with a good capacitance of 370 F g-1 (at a current density of 0.5 A g-1 ) and good cycling stability with a capacitance retention of 92 % after 10 000 charge/discharge cycles (at 10 A g-1 in 6 m aqueous KOH electrolyte). The applicability of the developed activated carbon for practical usage as a supercapacitor electrode material was demonstrated by its successful utilization in symmetric two-electrode cells and by powering electric devices. These findings provide a new approach to deal with the problem of sustainable wastes utilization and to advance challenging energy storage applications.

Whole-Genome Sequencing of Vibrio cholerae O1 El Tor Strains Isolated in Ukraine (2011) and Russia (2014).

Here, we present the draft whole-genome sequence of Vibrio cholerae O1 El Tor strains 76 and M3265/80, isolated in Mariupol, Ukraine, and Moscow, Russia. The presence of various mutations detected in virulence-associated mobile elements indicates high genetic similarity of the strains reported here with new highly virulent variants of the cholera agent V. cholerae.

Selective Synthesis of 2,5-Diformylfuran by Sustainable 4-acetamido-TEMPO/Halogen-Mediated Electrooxidation of 5-Hydroxymethylfurfural.

A new method was developed for the selective gram-scale synthesis of 2,5-diformylfuran (DFF), which is an important chemical with a high application potential, via oxidation of biomass-derived 5-hydroxylmethylfurfural (HMF) catalyzed by 4-acetylamino-2,2,6,6-tetramethylpiperidine-1-oxyl (4-AcNH-TEMPO) in a two-phase system consisting of a methylene chloride and aqueous solution containing sodium hydrogen carbonate and potassium iodide. The key feature of this method is the generation of the I2 (co-)oxidant by anodic oxidation of iodide anions during pulse electrolysis. In addition, the electrolyte can be successfully recycled five times while maintaining a 62-65 % yield of DFF. This novel method provides a sustainable pathway for waste-free production of DFF without the use of metal catalysts and expensive oxidants. An advantage of electrooxidation is utilized in the preparation of demanding chemical.

Draft Whole-Genome Sequence of a New Variant of Vibrio cholerae O1 El Tor Strain Isolated from a Cholera Patient in Russia.

Draft whole-genome sequencing of the Vibrio cholerae О1 El Tor clinical strain L3226, isolated in Moscow in 2010, was carried out. Various mutations in the virulence-associated mobile elements were determined in its genome that differentiated this strain from the reference V. cholerae О1 El Tor strain N16961.

Molecular-genetic peculiarities of classical biotype Vibrio cholerae, the etiological agent of the last outbreak Asiatic cholera in Russia.

Molecular-genetic properties of classical biotype Vibrio cholerae strains that caused the Asiatic cholera outbreak in 1942 in Russia have been investigated for the first time. Being characterized by high-level production of cholera toxin and toxin-coregulated adhesion pili both of which are the major virulence factors, all the strains studied, in contrast to the typical cholera pathogens, were autographic requiring purine and/or amino acids added to the minimal medium for their growth. Moreover, these strains containing the structural gene hapA, as shown by the polymerase chain reaction, produced no soluble hemagglutinin/protease, which enables the vibrios to get disseminated in the environment. The peculiarities of the natural V. cholerae strains elucidated in the work are likely to be responsible for the unusual infectious and epidemic processes observed during that cholera outbreak.