Evaluation of the SO(2) and NH(3) gas adsorption properties of CuO/ZnO/Mn(3)O(4) and CuO/ZnO/NiO ternary impregnated activated carbon using combinatorial materials science methods.

Impregnated activated carbons (IAC) are widely used materials for the removal of toxic gases in personal respiratory protection applications. The combinatorial method has been employed to prepare IACs containing different types of metal oxides in various proportions and evaluate their adsorption performance for low molecular weight gases, such as SO(2) and NH(3), under dry conditions. Among the metal oxides used for the study, Mn(3)O(4) was found to have the highest capacity for retaining SO(2) gas under dry conditions. NiO and ZnO were found to have similar NH(3) adsorption capacities which are higher than the NH(3) capacities observed for the other metal oxide impregnants used in the study. Although Cu- or Zn-based impregnants and their combinations have been extensively studied and used as gas adsorbents, neither Mn(3)O(4) nor NiO have been incorporated in the formulations used. In this study, ternary libraries of IACs with various combinations of CuO/ZnO/Mn(3)O(4) and CuO/ZnO/NiO were studied and evaluated for their adsorption of SO(2) and NH(3) gases. Combinations of CuO, ZnO, and Mn(3)O(4) were found to have the potential to be multigas adsorbents compared to formulations that contain NiO.

SO2 and NH3 gas adsorption on a ternary ZnO/CuO/CuCl2 impregnated activated carbon evaluated using combinatorial methods.

Ternary libraries of 64 ZnO/CuO/CuCl(2) impregnated activated carbon samples were prepared on untreated or HNO(3)-treated carbon and evaluated for their SO(2) and NH(3) gas adsorption properties gravimetrically using a combinatorial method. CuCl(2) is shown to be a viable substitute for HNO(3) and some compositions of ternary ZnO/CuO/CuCl(2) impregnated carbon samples prepared on untreated carbon provided comparable SO(2) and NH(3) gas removal capacities to the materials prepared on HNO(3)-treated carbon. Through combinatorial methods, it was determined that the use of HNO(3) in this multigas adsorbent formulation can be avoided.

Gas adsorption properties of the ternary ZnO/CuO/CuCl(2) impregnated activated carbon system for multigas respirator applications assessed through combinatorial methods and dynamic adsorption studies.

A ternary library of 64 ZnO/CuO/CuCl(2) impregnated activated carbon samples was synthesized and screened automatically using a combinatorial (combi) method. The ability of the samples to adsorb toxic gases was screened gravimetrically. The stoichiometric ratio of reaction (SRR) between the moles of toxicant and the total moles of impregnant was obtained from the calculated mass increase of the samples after chemisorption, with a high SRR indicating high efficiency of toxicant removal. The combi samples that exhibited good dry SO(2) and NH(3) adsorption were prepared in bulk using the incipient wetness method and were evaluated for multigas respirator function by dynamic adsorption studies of SO(2), NH(3), HCN, and C(6)H(12) gases in either dry or humid conditions at ambient temperature. The bulk samples showed equivalent gas adsorption capacities when exposed to the different challenge gases indicating the value of the combi method for initial screening. Cu(2)Cl(OH)(3) was identified to be a potential multigas adsorbent.