Printed Stretchable Graphene Conductors for Wearable Technology.

Skin-compatible printed stretchable conductors that combine a low gauge factor with a high durability over many strain cycles are still a great challenge. Here, a graphene nanoplatelet-based colloidal ink utilizing a skin-compatible thermoplastic polyurethane (TPU) binder with adjustable rheology is developed. Stretchable conductors that remain conductive even under 100% strain and demonstrate high fatigue resistance to cyclic strains of 20-50% are realized via printing on TPU. The sheet resistances of these conductors after drying at 120 °C are as low as 34 Ω â–¡-1 mil-1. Furthermore, photonic annealing at several energy levels is used to decrease the sheet resistance to <10 Ω â–¡-1 mil-1, with stretchability and fatigue resistance being preserved and tunable. The high conductivity, stretchability, and cyclic stability of printed tracks having excellent feature definition in combination with scalable ink production and adjustable rheology bring the high-volume manufacturing of stretchable wearables into scope.

Reverse-Offset Printing of Polymer Resist Ink for Micrometer-Level Patterning of Metal and Metal-Oxide Layers.

Printed electronics has advanced during the recent decades in applications such as organic photovoltaic cells and biosensors. However, the main limiting factors preventing the more widespread use of printing in flexible electronics manufacturing are (i) the poor attainable linewidths via conventional printing methods (≫10 µm), (ii) the limited availability of printable materials (e.g., low work function metals), and (iii) the inferior performance of many printed materials when compared to vacuum-processed materials (e.g., printed vs sputtered ITO). Here, we report a printing-based, low-temperature, low-cost, and scalable patterning method that can be used to fabricate high-resolution, high-performance patterned layers with linewidths down to ∼1 µm from various materials. The method is based on sequential steps of reverse-offset printing (ROP) of a sacrificial polymer resist, vacuum deposition, and lift-off. The sharp vertical sidewalls of the ROP resist layer allow the patterning of evaporated metals (Al) and dielectrics (SiO) as well as sputtered conductive oxides (ITO), where the list is expandable also to other vacuum-deposited materials. The resulting patterned layers have sharp sidewalls, low line-edge roughness, and uniform thickness and are free from imperfections such as edge ears occurring with other printed lift-off methods. The applicability of the method is demonstrated with highly conductive Al (∼5 × 10-8 Ωm resistivity) utilized as transparent metal mesh conductors with ∼35 Ω□ at 85% transparent area percentage and source/drain electrodes for solution-processed metal-oxide (In2O3) thin-film transistors with ∼1 cm2/(Vs) mobility. Moreover, the method is expected to be compatible with other printing methods and applicable in other flexible electronics applications, such as biosensors, resistive random access memories, touch screens, displays, photonics, and metamaterials, where the selection of current printable materials falls short.

Reverse Offset Printing of Semidried Metal Acetylacetonate Layers and Its Application to a Solution-Processed IGZO TFT Fabrication.

The submicrometer resolution printing of various metal acetylacetonate complex inks including Fe, V, Mn, Co, Ni, Zn, Zr, Mo, and In was enabled by a robust ink formulation scheme which adopted a ternary solvent system where solubility, surface wettability, and drying as well as absorption behavior on a polydimethylsiloxane sheet were optimized. Hydrogen plasma in heated conditions resulted in bombarded, resistive, or conductive state depending on the temperature and the metal species. With a conductivity-bestowed layer of MoO x and a plasma-protecting layer of ZrO x situated on the top of an IGZO layer, a solution-processed TFT exhibiting an average mobility of 0.17 cm2/(V s) is demonstrated.

Genotoxic and inflammatory effects of nanofibrillated cellulose in murine lungs.

Nanofibrillated cellulose (NFC) is a sustainable and renewable nanomaterial, with diverse potential applications in the paper and medical industries. As NFC consists of long fibres of high aspect ratio, we examined here whether TEMPO-(2,2,6,6-tetramethyl-piperidin-1-oxyl) oxidised NFC (length 300-1000nm, thickness 10-25nm), administrated by a single pharyngeal aspiration, could be genotoxic to mice, locally in the lungs or systemically in the bone marrow. Female C57Bl/6 mice were treated with four different doses of NFC (10, 40, 80 and 200 µg/mouse), and samples were collected 24h later. DNA damage was assessed by the comet assay in bronchoalveolar lavage (BAL) and lung cells, and chromosome damage by the bone marrow erythrocyte micronucleus assay. Inflammation was evaluated by BAL cell counts and analysis of cytokines and histopathological alterations in the lungs. A significant induction of DNA damage was observed at the two lower doses of NFC in lung cells, whereas no increase was seen in BAL cells. No effect was detected in the bone marrow micronucleus assay, either. NFC increased the recruitment of inflammatory cells to the lungs, together with a dose-dependent increase in mRNA expression of tumour necrosis factor α, interleukins 1ß and 6, and chemokine (C-X-C motif) ligand 5, although there was no effect on the levels of the respective proteins. The histological analysis showed a dose-related accumulation of NFC in the bronchi, the alveoli and some in the cytoplasm of macrophages. In addition, neutrophilic accumulation in the alveolar lung space was observed with increasing dose. Our findings showed that NFC administered by pharyngeal aspiration caused an acute inflammatory response and DNA damage in the lungs, but no systemic genotoxic effect in the bone marrow. The present experimental design did not, however, allow us to determine whether the responses were transient or could persist for a longer time.