Numerical study of the hydrodynamic drag force in atomic force microscopy measurements undertaken in fluids.

When atomic force microscopy (AFM) is employed for in vivo study of immersed biological samples, the fluid medium presents additional complexities, not least of which is the hydrodynamic drag force due to viscous friction of the cantilever with the liquid. This force should be considered when interpreting experimental results and any calculated material properties. In this paper, a numerical model is presented to study the influence of the drag force on experimental data obtained from AFM measurements using computational fluid dynamics (CFD) simulation. The model provides quantification of the drag force in AFM measurements of soft specimens in fluids. The numerical predictions were compared with experimental data obtained using AFM with a V-shaped cantilever fitted with a pyramidal tip. Tip velocities ranging from 1.05 to 105 µm/s were employed in water, polyethylene glycol and glycerol with the platform approaching from a distance of 6000 nm. The model was also compared with an existing analytical model. Good agreement was observed between numerical results, experiments and analytical predictions. Accurate predictions were obtained without the need for extrapolation of experimental data. In addition, the model can be employed over the range of tip geometries and velocities typically utilized in AFM measurements.

Factors influencing the discrimination and classification of prostate cancer cell lines by FTIR microspectroscopy.

In this study we obtained Fourier transform infrared (FTIR) spectra of fixed prostate cell lines of differing types as well as the primary epithelial cells from benign prostatic hyperplasia (BPH). Results showed that by using multivariate chemometric analysis it was possible to discriminate and classify these cell lines, which gave rise to sensitivity and specificity values of >94% and >98%, respectively. Following on from these results the possible influences of different factors on the discrimination and classification of the prostate cell lines were examined. Firstly, the effect of using different growth media during cell culturing was investigated, with results indicating that this did not influence chemometric discrimination. Secondly, differences in the nucleus-to-cytoplasm (N/C) ratio were examined, and it was concluded that this factor was not the main reason for the discrimination and classification of the prostate cancer (CaP) cell lines. In conclusion, given the fact that neither growth media nor N/C ratio could totally explain the classification it is likely that actual biochemical differences between the cell lines is the major contributing factor.

Determination of Pb and Cd in road dusts over the period in which Pb was removed from petrol in the UK.

It is commonly agreed that automobile exhaust has been the most important source of Pb pollution in urban areas, and that Cd may come from wear and tear of tyres. This study evaluates the fall in Pb concentrations in road dusts in Manchester as a consequence of the removal of Pb from petrol in January 2000. In the work presented here a slurry graphite furnace atomic absorption methodology for the determination of Pb and Cd in road dusts has been developed and is compared with an acid digestion method in terms of efficiency. The reproducibility and accuracy of the results obtained by acid digestion and the slurry method have been studied and a certified reference material CRM 038 was analysed to confirm the reliability of the proposed methods. Different factors were evaluated throughout this work including: (i) the effect of traffic density on Pb and Cd levels in road dust samples collected weekly during the period of May 1999 until September 2000; (ii) comparison between the Pb and Cd levels in a busy road and a residential street; (iii) the effect of distance from the source on Pb and Cd levels; The results of these experiments show a reduction in Pb levels over the sampling period. The relationship between road dust particle size and Pb and Cd concentration was also investigated in the 4-250 microns size range using the slurry method, showing that there is a relationship between metal concentration and particle size; the highest concentrations being for the smallest particle size.

Laser-induced photoacoustic signal phase study of stratum corneum and epidermis.

Laser-induced photoacoustic signal phase was employed for measurements of optothermal parameters of pig abdomen stratum corneum and epidermis. The non-radiative relaxation time was found to be 28 ms and the thermal diffusion time was 370 ms, yielding a thermal diffusivity value of (4.1 +/- 0.8) x 10(-4) cm2 s-1. This value compares well with other literature values for skin obtained using photothermal techniques.