Interactions of imidazolium-based ionic liquids with oxide surfaces controlled by alkyl chain functionalization.

From a different angle: Thin films of functionalized ionic liquids are deposited on cerium oxides following a surface science approach. The functionalization of the alkyl chain changes its orientation with respect to the surface plane from normal to parallel. This then leads to a different surface chemistry at higher temperatures.

Dehydrogenation mechanism of liquid organic hydrogen carriers: dodecahydro-N-ethylcarbazole on Pd(111).

Dodecahydro-N-ethylcarbazole (H12-NEC) has been proposed as a potential liquid organic hydrogen carrier (LOHC) for chemical energy storage, as it combines both favourable physicochemical and thermodynamic properties. The design of optimised dehydrogenation catalysts for LOHC technology requires a detailed understanding of the reaction pathways and the microkinetics. Here, we investigate the dehydrogenation mechanism of H12-NEC on Pd(111) by using a surface-science approach under ultrahigh vacuum conditions. By combining infrared reflection-absorption spectroscopy, density functional theory calculations and X-ray photoelectron spectroscopy, surface intermediates and their stability are identified. We show that H12-NEC adsorbs molecularly up to 173 K. Above this temperature (223 K), activation of C-H bonds is observed within the five-membered ring. Rapid dehydrogenation occurs to octahydro-N-ethylcarbazole (H8-NEC), which is identified as a stable surface intermediate at 223 K. Above 273 K, further dehydrogenation of H8-NEC proceeds within the six-membered rings. Starting from clean Pd(111), C-N bond scission, an undesired side reaction, is observed above 350 K. By complementing surface spectroscopy, we present a temperature-programmed molecular beam experiment, which permits direct observation of dehydrogenation products in the gas phase during continuous dosing of the LOHC. We identify H8-NEC as the main product desorbing from Pd(111). The onset temperature for H8-NEC desorption is 330 K, the maximum reaction rate is reached around 550 K. The fact that preferential desorption of H8-NEC is observed even above the temperature threshold for H8-NEC dehydrogenation on the clean surface is attributed to the presence of surface dehydrogenation and decomposition products during continuous reactant exposure.

Preparation and characterization of ultrathin [Ru(CO)3Cl2]2 and [BMIM][Tf2N] films on Al2O3/NiAl(110) under UHV conditions.

Towards a better understanding of the interface chemistry of ionic liquid (IL) thin film catalytic systems we have applied a rigorous surface science model approach. For the first time, a model homogeneous catalyst has been prepared under ultrahigh vacuum conditions. The catalyst, di-µ-chlorobis(chlorotricarbonylruthenium) [Ru(CO)(3)Cl(2)](2), and the solvent, the IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N], have been deposited by physical vapor deposition onto an alumina model support [Al(2)O(3)/NiAl(110)]. First, the interaction between thin films of [Ru(CO)(3)Cl(2)](2) and the support is investigated. Then, the ruthenium complex is co-deposited with the IL and the influence of the solvent on the catalyst is discussed. D(2)O, which is a model reactant, is further added. Growth, surface interactions, and mutual interactions in the thin films are studied with IRAS in combination with density functional (DFT) calculations. At 105 K, molecular adsorption of [Ru(CO)(3)Cl(2)](2) is observed on Al(2)O(3)/NiAl(110). The IRAS spectra of the binary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] and ternary [Ru(CO)(3)Cl(2)](2) + [BMIM][Tf(2)N] + D(2)O show every characteristic band of the individual components. Above 223 K, partial decomposition of the ruthenium complex leads to species of molecular nature attributed to Ru(CO) and Ru(CO)(2) surface species. Formation of metallic ruthenium clusters occurs above 300 K and the model catalyst decomposes further at higher temperatures. Neither the presence of the IL nor of D(2)O prevents this partial decomposition of [Ru(CO)(3)Cl(2)](2) on alumina.

Dehydrogenation of dodecahydro-N-ethylcarbazole on Pd/Al2O3 model catalysts.

To elucidate the dehydrogenation mechanism of dodecahydro-N-ethylcarbazole (H(12)-NEC) on supported Pd catalysts, we have performed a model study under ultra high vacuum (UHV) conditions. H(12)-NEC and its final dehydrogenation product, N-ethylcarbazole (NEC), were deposited by physical vapor deposition (PVD) at temperatures between 120 K and 520 K onto a supported model catalyst, which consisted of Pd nanoparticles grown on a well-ordered alumina film on NiAl(110). Adsorption and thermally induced surface reactions were followed by infrared reflection absorption spectroscopy (IRAS) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) in combination with density functional theory (DFT) calculations. It was shown that, at 120 K, H(12)-NEC adsorbs molecularly both on the Al(2)O(3)/NiAl(110) support and on the Pd particles. Initial activation of the molecule occurs through C-H bond scission at the 8a- and 9a-positions of the carbazole skeleton at temperatures above 170 K. Dehydrogenation successively proceeds with increasing temperature. Around 350 K, breakage of one C-N bond occurs accompanied by further dehydrogenation of the carbon skeleton. The decomposition intermediates reside on the surface up to 500 K. At higher temperatures, further decay to small fragments and atomic species is observed. These species block most of the absorption sites on the Pd particles, but can be oxidatively removed by heating in oxygen at 600 K, fully restoring the original adsorption properties of the model catalyst.

Controlling the adsorption kinetics via nanostructuring: Pd nanoparticles on TiO2 nanotubes.

Activity and selectivity of supported catalysts critically depend on transport and adsorption properties. Combining self-organized porous oxide films with different metal deposition techniques, we have prepared novel Pd/TiO(2) catalysts with a new level of structural control. It is shown that these systems make it possible to tune adsorption kinetics via their nanostructure. Self-organized TiO(2) nanotubular arrays (TiNTs) prepared by electrochemical methods are used as a support, on which Pd particles are deposited. Whereas physical vapor deposition (PVD) in ultrahigh vacuum (UHV) allows us to selectively grow Pd particles at the tube orifice, Pd/TiNT systems with homogeneously distributed Pd aggregates inside the tubes are available by particle precipitation (PP) from solution. Both methods also provide control over particle size and loading. Using in-situ infrared reflection absorption spectroscopy (IRAS) and molecular beam (MB) methods, we illustrate the relation between the nanostructure of the Pd/TiNT systems and their adsorption kinetics. Control over the metal nanoparticle distribution in the nanotubes leads to drastic differences in adsorption probability and saturation behavior. These differences are rationalized based on differences in surface and gas phase transport resulting from their nanostructure. The results suggest that using carefully designed metal/TiNT systems it may be possible to tailor transport processes in catalytically active materials.

Ionic liquid based model catalysis: interaction of [BMIM][Tf2N] with Pd nanoparticles supported on an ordered alumina film.

Towards a better understanding of novel catalytic materials consisting of supported noble metal catalysts modified by an ionic liquid (IL) film, we have performed a study under ultrahigh-vacuum (UHV) conditions. The model surface consists of Pd nanoparticles grown in UHV on an ordered alumina film on NiAl(110). Thin films of the room temperature IL 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N] are deposited onto this surface by means of physical vapor deposition (PVD). The interaction of the IL with clean and CO-covered Pd/Al(2)O(3)/NiAl(110) at 300 K and the thermal behavior of the deposited IL films on Pd/Al(2)O(3)/NiAl(110) are investigated by time-resolved infrared reflection absorption spectroscopy (TR-IRAS) and X-ray photoelectron spectroscopy (XPS). At 300 K, the IL adsorbs molecularly both onto the Pd particles and onto the alumina. The IR spectra suggest that the [Tf(2)N](-) anions interact with Pd sites preferentially via the sulfonyl groups. CO pre-adsorbed on the Pd particles is partially displaced by the IL, even at 300 K, and only the part of CO adsorbed onto hollow sites on (111) facets of the Pd particles remains in place. Upon heating to temperatures higher than the desorption temperature of the IL (>400 K), molecular desorption of the IL competes with decomposition. The decomposition products, atomic species and small fragments, remain preferentially adsorbed onto the Pd nanoparticles and strongly modify their surface properties. Most of the decomposition products originate from the [BMIM](+) cations, whereas the [Tf(2)N](-) anions desorb for the most part.

Toward ionic-liquid-based model catalysis: growth, orientation, conformation, and interaction mechanism of the [Tf2N]- anion in [BMIM][Tf2N] thin films on a well-ordered alumina surface.

Aiming at a better understanding of the interaction of ionic liquid (IL) thin films with oxide supports, we have performed a model study under ultrahigh vacuum (UHV) conditions. We apply infrared reflection absorption spectroscopy (IRAS) in combination with density functional theory (DFT). Thin films of 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][Tf(2)N] are grown on an atomically flat, well-ordered alumina film on NiAl(110) using a novel UHV-compatible evaporator. Time-resolved IRAS measured during the growth and subsequent thermal desorption points toward reversible molecular adsorption and desorption. There was no indication of decomposition. The vibrational bands are assigned with the help of DFT calculations. Strong relative intensity changes in individual [Tf(2)N](-) bands are observed in the monolayer region. This indicates pronounced orientation effects for the anion. The adsorption geometry of [Tf(2)N](-) is determined on the basis of a detailed comparison with DFT. The results suggest that [Tf(2)N](-) anions adopt a cis conformation in the submonolayer region. They adsorb in a slightly tilted orientation with respect to the surface, mainly interacting with the support via the sulfonyl groups.

Activity coefficients at infinite dilution of organic solutes in the ionic liquid 1-ethyl-3-methyl-imidazolium nitrate.

Infinite dilution activity coefficients gamma(1)(infinity) and gas-liquid partition coefficients K(L) of 30 selected hydrocarbons, alcohols, ketones, ethers, esters, haloalkanes, nitrogen- and sulfur-containing compounds in the ionic liquid (IL) 1-ethyl-3-methylimidazolium nitrate [EMIM][NO(3)] were determined by gas-liquid chromatography at five temperatures in the range from 318.15 to 353.15 K. Relative contribution of adsorption at gas-liquid interphase to the overall solute retention, as examined by varying sample size and IL loading in the column, was found negligible. Partial molar excess enthalpies and entropies at infinite dilution were derived from the temperature dependence of the gamma(1)(infinity) values. The linear free energy relationship (LFER) solvation model was used to correlate successfully the KL values. The LFER correlation parameters and excess thermodynamic functions were analyzed to disclose molecular interactions operating between the IL and the individual solutes. In addition, the promising potential of [EMIM][NO(3)] for applications in solvent-aided separation processes was identified, the selectivities of [EMIM][NO(3)] for separation of aromatic hydrocarbons and thiophene from saturated hydrocarbons ranking among the highest ever observed with ILs or molecular solvents.