Features of electronic and lattice mechanisms of transboundary heat transfer in multilayer nanolaminate TiAlN/Ag coatings.

Plasmon resonance heterogeneities were identified and studied along Ag and TiAlN layers within a multilayer stack in nanolaminate TiAlN/Ag coatings. For this purpose, a high-resolution plasmon microscopy was used. The plasmons intensity, energy, and depth of interface plasmon-polariton penetration were studied by scanning reflected electron energy loss spectroscopy. The heat conductivity of such metal-insulator-metal (MIM) nanolaminate coatings was measured by laser reflectometry. Dependencies of thermal conductivity coefficient of coatings, MIM interfaces, and resistivity of Ag layers as a function of the Ag-TiAlN bilayer thickness were calculated on the basis of experimental data. The contribution of plasmon resonance confinement to the abnormal lower thermal conductivity in the MIM metamaterial with Ag layer thickness below 25 nm is discussed. In particular, the results highlight the relevant role of different heat transfer mechanisms between MI and IM interfaces: asymmetry of plasmon-polariton interactions on upper and lower boundaries of Ag layer and asymmetry of LA and TA phonons propagation through interfaces.

Room temperature self-assembled growth of vertically aligned columnar copper oxide nanocomposite thin films on unmatched substrates.

In this work, we report the self-assembled growth of vertically aligned columnar Cu2O + Cu4O3 nanocomposite thin films on glass and silicon substrates by reactive sputtering at room temperature. Microstructure analyses show that each phase in nanocomposite films has the columnar growth along the whole thickness, while each column exhibits the single phase characteristics. The local epitaxial growth behavior of Cu2O is thought to be responsible for such an unusual microstructure. The intermediate oxygen flow rate between those required to synthesize single phase Cu2O and Cu4O3 films produces some Cu2O nuclei, and then the local epitaxial growth provides a strong driving force to promote Cu2O nuclei to grow sequentially, giving rise to Cu2O columns along the whole thickness. Lower resistivity has been observed in such kind of nanocomposite thin films than that in single phase thin films, which may be due to the interface coupling between Cu2O and Cu4O3 columns.

3D and 2D structural characterization of 1D Al/Al2 O3 biphasic nanostructures.

1D Al/Al2 O3 nanostructures have been synthesized by chemical vapour deposition (CVD) of the molecular precursor [(t) BuOAlH2 ]2 . The deposited nanostructures grow chaotically on the substrate forming a layer with a high porosity (80%). Depending on the deposition time, diverse nanostructured surfaces with different distribution densities were achieved. A three-dimensional (3D) reconstruction has been evaluated for every nanostructure density using the Focus Ion Beam (FIB) tomography technique and reconstruction software tools. Several structural parameters such as porosity, Euler number, geometrical tortuosity and aspect ratio have been quantified through the analysis with specified software of the reconstructions. Additionally roughness of the prepared surfaces has been characterized at micro- and nanoscale using profilometry and AFM techniques, respectively. While high aspects ratio around 20-30 indicates a strong anisotropy in the structure, high porosity values (around 80%) is observed as a consequence of highly tangled geometry of such 1D nanostructures.

A direct and quantitative image of the internal nanostructure of nonordered porous monolithic carbon using FIB nanotomography.

A direct study of the shape, size and connectivity of nonordered pores in carbon materials is particularly challenging. A new method that allows direct three-dimensional (3D) investigations of mesopores in monolithic carbon materials and quantitative characterization of their physical properties (surface area and pore size distribution) is reported. Focused ion beam (FIB) nanotomography technique is performed by combination of focused ion beam and scanning electron microscope. Porous monolithic carbon is produced by carbonization of a resorcinol-formaldehyde gel in the presence of a cationic polyelectrolyte as a pore stabilizer.

TEM foil preparation of sub-micrometre sized individual grains by focused ion beam technique.

Analysis of presolar silicate grains provides new knowledge on interstellar and circumstellar environments and can be used to test models of the Galactic chemical evolution. However, structural information of these grains is rare because sample preparation for transmission electron microscopy is very difficult due to the small dimensions of these grains (<0.5 mum). With the use of the focused ion beam technique thin foils from these grains for transmission electron microscopy analysis can be prepared. Nevertheless, reaching the required precision of some tens of nanometres for the preparation of the transmission electron microscopy foil in the place of interest is not trivial. Furthermore, in the current samples, the grain of interest can only be identified by its different isotopic composition; i.e. there is no contrast difference in scanning electron microscopy or transmission electron microscopy images which allow the identification of the grain. Therefore, the grain has to be marked in some way before preparing the transmission electron microscopy foil. In the present paper, a method for transmission electron microscopy foil preparation of grains about 200 to 400 nm in diameter is presented. The method utilizes marking of the grain by Pt deposition and milling of holes to aid in the exact orientation of the transmission electron microscopy foil with respect to the grain. The proposed method will be explained in detail by using an example grain.

Site-specific structural investigations of oxidized nickel samples modified by plasma erosion processes.

A focused ion beam was employed for local target preparation for EBSD analysis. The volume of the ion-solid interaction is well below 50 nm at glancing incidence for metallic and transition metal oxide samples. Therefore, focused ion beam can successfully be used for electron backscatter diffraction (EBSD) sample preparation. The sample investigated consists of Ni covered with a NiO layer of approximately 5 microm thickness. Focused ion beam cross-sectioning of these layers and subsequent electron imaging in addition to EBSD maps shows a bimodal structure of the oxide layer. In order to test the potential of such oxidized samples as electrode materials, single spark erosion experiments were performed. The erosion craters have diameters up to 40 microm and have a depth corresponding to the thickness of the oxide layer. In addition, a deformation zone produced by thermoshock accompanies the formation of the crater. This deformation zone was further investigated by EBSD analysis using a new way of sample preparation employing the focused ion beam technology. This target preparation routine is called Volume of Interest Transfer and has the potential of providing a full three-dimensional characterization.