Computational modeling of revision total hip arthroplasty involving acetabular defects: A systematic review.

Revision total hip arthroplasty (rTHA) involving acetabular defects is a complex procedure associated with lower rates of success than primary THA. Computational modeling has played a key role in surgical planning and prediction of postoperative outcomes following primary THA, but modeling applications in rTHA for acetabular defects remain poorly understood. This study aimed to systematically review the use of computational modeling in acetabular defect classification, implant selection and placement, implant design, and postoperative joint functional performance evaluation following rTHA involving acetabular defects. The databases of Web of Science, Scopus, Medline, Embase, Global Health and Central were searched. Fifty-three relevant articles met the inclusion criteria, and their quality were evaluated using a modified Downs and Black evaluation criteria framework. Manual image segmentation from computed tomography scans, which is time consuming, remains the primary method used to generate 3D models of hip bone; however, statistical shape models, once developed, can be used to estimate pre-defect anatomy rapidly. Finite element modeling, which has been used to estimate bone stresses and strains, and implant micromotion postoperatively, has played a key role in custom and off-the-shelf implant design, mitigation of stress shielding, and prediction of bone remodeling and implant stability. However, model validation is challenging and requires rigorous evaluation and comparison with respect to mid- to long-term clinical outcomes. Development of fast, accurate methods to model acetabular defects, including statistical shape models and artificial neural networks, may ultimately improve uptake of and expand applications in modeling and simulation of rTHA for the research setting and clinic.

Elevated levels of active Transforming Growth Factor ß1 in the subchondral bone relate spatially to cartilage loss and impaired bone quality in human knee osteoarthritis.

OBJECTIVE: The association between the spatially distributed level of active TGFß1 in human subchondral bone, and the characteristic structural and cellular parameters of human knee OA, was assessed. DESIGN: Paired subchondral bone samples from 35 OA arthroplasty patients, (15 men and 20 women, aged 69 ± 9 years) were obtained from beneath macroscopically present (CA+) or denuded cartilage (CA-) to determine the concentration of active TGFß1 (ELISA) and its relationship to bone quality (synchrotron micro-CT), cellularity, and vascularization (histology). RESULTS: Bone samples beneath (CA-) regions had significantly increased concentrations of active TGFß1 protein (mean difference: 26.4; 95% CI: [3.2, 49.7]), when compared to bone in CA + regions. Trabecular Bone below (CA-) regions had increased bone volume (median difference: 4.3; 96.49% CI: [-1.7, 17.8]), increased trabecular number (1.5 [0.006, 2.6], decreased trabecular separation (-0.05 [-0.1,-0.005]), and increased bone mineral density (394.5 [65.7, 723.3]) comparing to (CA+) regions. Further, (CA-) bone regions showed increased osteocyte density (0.012 [0.006, 0.018]), with larger osteocyte lacunae (39.8 [7.8, 71.7]) that were less spherical (-0.02 [-0.04, -0.003]), and increased bone matrix vascularity (12.4 [0.3, 24.5]) compared to (CA+). In addition, increased levels of active TGFß1 related to increased bone volume (0.04 [-0.11, 0.9]), while increased OARSI grade associated with lacunar volume (-44.1 [-71.1, -17.2]), and orientation (2.7 [0.8, 4.6]). CONCLUSION: Increased concentration of active TGFß1 in the subchondral bone of human knee OA associates spatially with impaired bone quality and disease severity, suggesting that TGFß1 is a potential therapeutic target to prevent or reduce human OA disease progression.

Evidence for osteocyte-mediated bone-matrix degradation associated with periprosthetic joint infection (PJI)

Osteomyelitis associated with periprosthetic joint infection (PJI) signals a chronic infection and the need for revision surgery. An osteomyelitic bone exhibits distinct morphological features, including evidence for osteolysis and an accelerated bone remodelling into poorly organised, poor-quality bone. In addition to immune cells, various bone cell-types have been implicated in the pathology. The present study sought to determine the types of bone-cell activities in human PJI bones. Acetabular biopsies from peri-implant bone from patients undergoing revision total hip replacement (THR) for chronic PJI (with several identified pathogens) as well as control bone from the same patients and from patients undergoing primary THR were analysed. Histological analysis confirmed that PJI bone presented increased osteoclastic activity compared to control bone. Analysis of osteocyte parameters showed no differences in osteocyte lacunar area between the acetabular bone taken from PJI patients or primary THR controls. Analysis of bone matrix composition using Masson's trichrome staining and second-harmonic generation microscopy revealed widespread lack of mature collagen, commonly surrounding osteocytes, in PJI bone. Increased expression of known collagenases, such as matrix metallopeptidase (MMP) 13, MMP1 and cathepsin K (CTSK), was measured in infected bone compared to non-infected bone. Human bone and cultured osteocyte-like cells experimentally exposed to Staphylococcus aureus exhibited strongly upregulated expression of MMP1, MMP3 and MMP13 compared to non-exposed controls. In conclusion, the study identified previously unrecognised bone-matrix changes in PJI caused by multiple organisms deriving from osteocytes. Histological examination of bone collagen composition may provide a useful adjunct diagnostic measure of PJI.

Objectively measured 24-hour activity profiles before and after total hip arthroplasty.

AIMS: The purpose of this exploratory study was to investigate if the 24-hour activity profile (i.e. waking activities and sleep) objectively measured using wrist-worn accelerometry of patients scheduled for total hip arthroplasty (THA) improves postoperatively. PATIENTS AND METHODS: A total of 51 THA patients with a mean age of 64 years (24 to 87) were recruited from a single public hospital. All patients underwent THA using the same surgical approach with the same prosthesis type. The 24-hour activity profiles were captured using wrist-worn accelerometers preoperatively and at 2, 6, 12, and 26 weeks postoperatively. Patient-reported outcomes (Hip Disability and Osteoarthritis Outcome Score (HOOS)) were collected at all timepoints except two weeks postoperatively. Accelerometry data were used to quantify the intensity (sedentary, light, moderate, and vigorous activities) and frequency (bouts) of activity during the day and sleep efficiency. The analysis investigated changes with time and differences between Charnley class. RESULTS: Patients slept or were sedentary for a mean of 19.5 hours/day preoperatively and the 24-hour activity pattern did not improve significantly postoperatively. Outside of sleep, the patients spent their time in sedentary activities for a mean of 620 minutes/day (sd 143) preoperatively and 641 minutes/day (sd 133) six months postoperatively. No significant improvements were observed for light, moderate, and vigorous intensity activities (p = 0.140, p = 0.531, and p = 0.407, respectively). Sleep efficiency was poor (< 85%) at all timepoints. There was no postoperative improvement in sleep efficiency when adjusted for medications (p > 0.05). Patient-reported outcome measures showed a significant improvement with time in all domains when compared with preoperative levels. There were no differences with Charnley class at six months postoperatively. However, Charnley class C patients were more sedentary at two weeks postoperatively when compared with Charnley class A patients (p < 0.05). There were no further differences between Charnley classifications. CONCLUSION: This study describes the 24-hour activity profile of THA patients for the first time. Prior to THA, patients in this cohort were inactive and slept poorly. This cohort shows no improvement in 24-hour activity profiles at six months postoperative. Cite this article: Bone Joint J 2019;101-B:415-425.

Biomechanical changes and recovery of gait function after total hip arthroplasty for osteoarthritis: a systematic review and meta-analysis.

OBJECTIVE: To determine the change in walking gait biomechanics after total hip arthroplasty (THA) for osteoarthritis (OA) compared to the pre-operative gait status, and to compare the recovery of gait following THA with healthy individuals. METHODS: Systematic review with meta-analysis of studies investigating changes in gait biomechanics after THA compared to (1) preoperative levels and (2) healthy individuals. Data were pooled at commonly reported time points and standardised mean differences (SMDs) were calculated in meta-analyses for spatiotemporal, kinematic and kinetic parameters. RESULTS: Seventy-four studies with a total of 2,477 patients were included. At 6 weeks postoperative, increases were evident for walking speed (SMD: 0.32, 95% confidence intervals (CI) 0.14, 0.50), stride length (SMD: 0.40, 95% CI 0.19, 0.61), step length (SMD: 0.41, 95% CI 0.23, 0.59), and transverse plane hip range of motion (ROM) (SMD: 0.36, 95% CI 0.05, 0.67) compared to pre-operative gait. Sagittal, coronal and transverse hip ROM was significantly increased at 3 months (SMDs: 0.50 to 1.07). At 12 months postoperative, patients demonstrated deficits compared with healthy individuals for walking speed (SMD: -0.59, 95% CI -1.08 to -0.11), stride length (SMD: -1.27, 95% CI -1.63, -0.91), single limb support time (SMD: -0.82, 95% CI -1.23, -0.41) and sagittal plane hip ROM (SMD: -1.16, 95% CI -1.83, -0.49). Risk of bias scores ranged from seven to 24 out of 26. CONCLUSIONS: Following THA for OA, early improvements were demonstrated for spatiotemporal and kinematic gait patterns compared to the pre-operative levels. Deficits were still observed in THA patients compared to healthy individuals at 12 months.

Relationships between in vivo dynamic knee joint loading, static alignment and tibial subchondral bone microarchitecture in end-stage knee osteoarthritis.

OBJECTIVE: To study, in end-stage knee osteoarthritis (OA) patients, relationships between indices of in vivo dynamic knee joint loads obtained pre-operatively using gait analysis, static knee alignment, and the subchondral trabecular bone (STB) microarchitecture of their excised tibial plateau quantified with 3D micro-CT. DESIGN: Twenty-five knee OA patients scheduled for total knee arthroplasty underwent pre-operative gait analysis. Mechanical axis deviation (MAD) was determined radiographically. Following surgery, excised tibial plateaus were micro-CT-scanned and STB microarchitecture analysed in four subregions (anteromedial, posteromedial, anterolateral, posterolateral). Regional differences in STB microarchitecture and relationships between joint loading and microarchitecture were examined. RESULTS: STB microarchitecture differed among subregions (P < 0.001), anteromedially exhibiting highest bone volume fraction (BV/TV) and lowest structure model index (SMI). Anteromedial BV/TV and SMI correlated strongest with the peak external rotation moment (ERM; r = -0.74, r = 0.67, P < 0.01), despite ERM being the lowest (by factor of 10) of the moments considered, with majority of ERM measures below accuracy thresholds; medial-to-lateral BV/TV ratios correlated with ERM, MAD, knee adduction moment (KAM) and internal rotation moment (|r|-range: 0.54-0.74). When controlling for walking speed, KAM and MAD, the ERM explained additional 11-30% of the variations in anteromedial BV/TV and medial-to-lateral BV/TV ratio (R2 = 0.59, R2 = 0.69, P < 0.01). CONCLUSIONS: This preliminary study suggests significant associations between tibial plateau STB microarchitecture and knee joint loading indices in end-stage knee OA patients. Particularly, anteromedial BV/TV correlates strongest with ERM, whereas medial-to-lateral BV/TV ratio correlates strongest with indicators of medial-to-lateral joint loading (MAD, KAM) and rotational moments. However, associations with ERM should be interpreted with caution.

Joint loading and proximal tibia subchondral trabecular bone microarchitecture differ with walking gait patterns in end-stage knee osteoarthritis.

OBJECTIVES: To (1) stratify patient subgroups according to their distinct walking gait patterns in end-stage knee osteoarthritis (OA); (2) compare measures of joint loading and proximal tibia subchondral trabecular bone (STB) microarchitecture among these gait subgroups. DESIGN: Twenty-five knee OA patients undergoing total knee arthroplasty (TKA) had pre-operative gait analysis. Following surgery, excised tibial plateaus were micro-CT-scanned and STB microarchitecture analysed in four tibial condylar regions of interest. Peak knee moments were input to k-means cluster analysis, to identify subgroups with homogeneous gait patterns. Joint loading and STB microarchitecture parameters were compared among gait subgroups (Kruskal-Wallis, Bonferroni-corrected Mann-Whitney U tests). RESULTS: Three gait subgroups were revealed: biphasics (n = 7), flexors (n = 9), counter-rotators (n = 9). Peak knee adduction moment (KAM) and KAM impulse were significantly higher (P < 0.05) in biphasics than in flexors and counter-rotators (KAM = -0.65, -0.40 and -0.21 Nm/kg, respectively), suggesting a higher medial-to-lateral tibiofemoral load ratio in biphasics. Interestingly, STB medial-to-lateral bone volume fraction (BV/TV) ratio was also significantly higher (more than double) in biphasics and flexors than in counter-rotators (2.24, 2.00 and 1.00, respectively), whereas in biphasics it was only 10% higher than in flexors and not significantly so. CONCLUSIONS: Within the confines of the limited sample size, data suggests that different mechanisms between the biphasic and flexor gait subroups may generate comparable loads upon the tibial plateau and corresponding bony responses, despite significantly lower KAM indices in flexors. Hence, in flexor gait OA patients, conservative treatments designed to reduce KAM, may not be appropriate. Understanding joint loading among walking gait patterns and relationships to bone microarchitecture may aid at identifying/improving management of persons at risk for developing knee OA.

Defining the pubic symphysis angle with respect to the coronal plane - Clinical and biomechanical considerations.

BACKGROUND: Fixation strength of constructs placed across the pubic symphysis after injury is dependent on screw length, maximisation of which requires knowledge of the bony anatomy. The aim of this study was to describe the ideal angle of drilling to achieve maximal safe screw placement within the pubic body. Furthermore, the influences of age and gender on the skeletal topography were investigated. METHODS: Three hundred CT scans of patients without pelvic injury were analysed to record the angle of the pubic body (APB) with respect to the coronal plane, and the depth of the pubic body (DPB) in the sagittal plane. RESULTS: Mean APB and DPB were 54.69° and 55.35mm, respectively. Females had a significantly higher mean APB than males (57.29° vs. 52.41°; p<0.001), whereas males had a significant larger mean DPB (59.13mm vs. 51.03mm; p<0.001). Age had no effect on the mean APB. Mean width of the pubic body at the base was 9.38mm. CONCLUSION: The anatomy of this region is reliable in terms of angles and sizes; a drill angle of 55° with respect to the operating table will allow maximal screw length, which should be in the region of 55mm. The mean width of the pubic body should allow for placement of a 3.5 or 4.5mm diameter screw.

Proximal translation of > 1 mm within the first two years of revision total hip arthroplasty correctly predicts whether or not an acetabular component is loose in 80% of cases: a case-control study with confirmed intra-operative outcomes.

AIMS: The purpose of this study was to determine the sensitivity, specificity and predictive values of previously reported thresholds of proximal translation and sagittal rotation of cementless acetabular components used for revision total hip arthroplasty (THA) at various times during early follow-up. PATIENTS AND METHODS: Migration of cementless acetabular components was measured retrospectively in 84 patients (94 components) using Ein-Bild-Rontgen-Analyse (EBRA-Cup) in two groups of patients. In Group A, components were recorded as not being loose intra-operatively at re-revision THA (52 components/48 patients) and Group B components were recorded to be loose at re-revision (42 components/36 patients). RESULTS: The mean proximal translation and sagittal rotation were significantly higher in Group B than in Group A from three months onwards (p < 0.02). Proximal translation > 1.0 mm within 24 months had a positive predictive value (PPV) of 90% and a specificity of 94%, but a sensitivity of 64%. Proximal translation > 1.0 mm within the first 24 months correctly identified 76 of 94 (81%) of components to be either loose or not loose. However, ten components in Group B (24%) did not migrate proximally above 1.0 mm within the first 60 months. CONCLUSION: The high PPV of EBRA-Cup measurements of proximal translation (90%) shows that this can be used in early follow-up to identify patients at risk of aseptic loosening. The absence of proximal translation within the first 60 months indicates a component is not likely to be loose at re-revision THA although it does not exclude late aseptic loosening as a cause of failure. Cite this article: Bone Joint J 2017;99-B:465-74.

The diagnostic performance of radiographic criteria to detect aseptic acetabular component loosening after revision total hip arthroplasty.

AIMS: This study aimed to determine the diagnostic performance of radiographic criteria to detect aseptic acetabular loosening after revision total hip arthroplasty (THA). Secondary aims were to determine the predictive values of different thresholds of migration and to determine the predictive values of radiolucency criteria. PATIENTS AND METHODS: Acetabular component migration to re-revision was measured retrospectively using Ein-Bild-Rontgen-Analyse (EBRA-Cup) and manual measurements (Sutherland method) in two groups: Group A, 52 components (48 patients) found not loose at re-revision and Group B, 42 components (36 patients) found loose at re-revision between 1980 and 2015. The presence and extent of radiolucent lines was also assessed. RESULTS: Using EBRA, both proximal translation and sagittal rotation were excellent diagnostic tests for detecting aseptic loosening. The area under the receiver operating characteristic (ROC) curves was 0.94 and 0.93, respectively. The thresholds of 2.5 mm proximal translation or 2° sagittal rotation (EBRA) in combination with radiolucency criteria had a sensitivity of 93% and specificity of 88% to detect aseptic loosening. The sensitivity, specificity, positive predictive value and negative predictive value (NPV) of radiolucency criteria were 41%, 100%, 100% and 68% respectively. Manual measurements of both proximal translation and sagittal rotation were very good diagnostic tests. The area under the ROC curve was 0.86 and 0.92 respectively. However, manual measurements had a decreased specificity compared with EBRA. Radiolucency criteria had a poor sensitivity and NPV of 41% and 68% respectively. CONCLUSION: This study shows that EBRA and manual migration measurements can be used as accurate diagnostic tools to detect aseptic loosening of cementless acetabular components used at revision THA. Radiolucency criteria should not be used in isolation to exclude loosening of cementless acetabular components used at revision THA given their poor sensitivity and NPV. Cite this article: Bone Joint J 2017;99-B:458-64.

Revision total hip arthroplasty using cemented collarless double-taper femoral components at a mean follow-up of 13 years (8 to 20): an update.

The outcome of 219 revision total hip arthroplasties (THAs) in 98 male and 121 female patients, using 137 long length and 82 standard length cemented collarless double-taper femoral stems in 211 patients, with a mean age of 72 years (30 to 90) and mean follow-up of six years (two to 18) have been described previously. We have extended the follow-up to a mean of 13 years (8 to 20) in this cohort of patients in which the pre-operative bone deficiency Paprosky grading was IIIA or worse in 79% and 73% of femurs with long and standard stems, respectively. For the long stem revision group, survival to re-revision for aseptic loosening at 14 years was 97% (95% confidence interval (CI) 91 to 100) and in patients aged > 70 years, survival was 100%. Two patients (two revisions) were lost to follow-up and 86 patients with 88 revisions had died. Worst-case analysis for survival to re-revision for aseptic loosening at 14 years was 95% (95% CI 89 to 100) and 99% (95% CI 96 to 100) for patients aged > 70 years. One additional long stem was classified as loose radiographically but not revised. For the standard stem revision group, survival to re-revision for aseptic loosening at 14 years was 91% (95% CI 83 to 99). No patients were lost to follow-up and 49 patients with 51 hips had died. No additional stems were classified as loose radiographically. Femoral revision using a cemented collarless double-taper stem, particularly with a long length stem, and in patients aged > 70 years, continues to yield excellent results up to 20 years post-operatively, including in hips with considerable femoral metaphyseal bone loss.

Head-neck taper corrosion in hip arthroplasty.

Modularity at the head-neck junction of the femoral component in THA became popular as a design feature with advantages of decreasing implant inventory and allowing adjustment of leg length, offset, and soft tissue balancing through different head options. The introduction of a new modular interface to femoral stems that were previously monoblock, or nonmodular, comes with the potential for corrosion at the taper junction through mechanically assisted crevice corrosion. The incidence of revision hip arthroplasty is on the rise and along with improved wear properties of polyethylene and ceramic, use of larger femoral head sizes is becoming increasingly popular. Taper corrosion appears to be related to all of its geometric parameters, material combinations, and femoral head size. This review article discusses the pathogenesis, risk factors, clinical assessment, and management of taper corrosion at the head-neck junction.

Dilemmas in imaging for peri-acetabular osteotomy: the influence of patient position and imaging technique on the radiological features of hip dysplasia.

Peri-acetabular osteotomy is an established surgical treatment for symptomatic acetabular dysplasia in young adults. An anteroposterior radiograph of the pelvis is commonly used to assess the extent of dysplasia as well as to assess post-operative correction. Radiological prognostic factors include the lateral centre-edge angle, acetabular index, extrusion index and the acetabular version. Standing causes a change in the pelvis tilt which can alter certain radiological measurements relative to the supine position. This article discusses the radiological indices used to assess dysplasia and reviews the effects of patient positioning on these indices with a focus on assessment for a peri-acetabular osteotomy. Intra-operatively, fluoroscopy is commonly used and the implications of using fluoroscopy as a modality to assess the various radiological indices along with the effects of using an anteroposterior or posteroanterior fluoroscopic view are examined. Each of these techniques gives rise to a slightly different image of the pelvis as the final image is sensitive to the position of the pelvis and the projection of the x-ray beam.

Biomechanical methods for the assessment of fracture repair.

The progress of fracture healing is directly related to an increasing stiffness and strength of the healing fracture. Similarly the weight bearing capacity of a bone directly relates to the mechanical stability of the fracture. Therefore, assessing the progress of fracture repair can be based on the measurement of the mechanical stability of the healing fracture. However, fracture stability is difficult to assess directly due to various obstacles of which shielding of the mechanical properties by the fracture fixation construct is the most relevant one. Several assessment methods have been proposed to overcome these obstacles and to obtain some sort of mechanical surrogate describing the stability of the fracture. The most direct method is the measurement of the flexibility of a fracture under a given external load, which comprises the challenge of accurately measuring the deformation of the bone. Alternative approaches include the measurement of load share between implant and bone by internal or by external sensors. A direct 3 dimensional measurement of bone displacement is provided by radiostereometric analysis which can assess fracture migration and can detect fracture movement under load. More indirect mechanical methods induce cyclic perturbations within the bone and measure the response as a function of healing time. At lower frequencies the perturbations are induced in the form of vibration and at higher frequencies in the form of ultrasonic waves. Both methods provide surrogates for the mechanical properties at the fracture site. Although biomechanical properties of a healing fracture provide a direct and clinically relevant measure for fracture healing, their application will in the near future be limited to clinical studies or research settings.

An extended posterior approach to the hip and pelvis for complex acetabular reconstruction that preserves the gluteal muscles and their neurovascular supply.

We investigated the detailed anatomy of the gluteus maximus, gluteus medius and gluteus minimus and their neurovascular supply in 22 hips in 11 embalmed adult Caucasian human cadavers. This led to the development of a surgical technique for an extended posterior approach to the hip and pelvis that exposes the supra-acetabular ilium and preserves the glutei during revision hip surgery. Proximal to distal mobilisation of the gluteus medius from the posterior gluteal line permits exposure and mobilisation of the superior gluteal neurovascular bundle between the sciatic notch and the entrance to the gluteus medius, enabling a wider exposure of the supra-acetabular ilium. This technique was subsequently used in nine patients undergoing revision total hip replacement involving the reconstruction of nine Paprosky 3B acetabular defects, five of which had pelvic discontinuity. Intra-operative electromyography showed that the innervation of the gluteal muscles was not affected by surgery. Clinical follow-up demonstrated good hip abduction function in all patients. These results were compared with those of a matched cohort treated through a Kocher-Langenbeck approach. Our modified approach maximises the exposure of the ilium above the sciatic notch while protecting the gluteal muscles and their neurovascular bundle.

Weight-bearing-induced displacement and migration over time of fracture fragments following split depression fractures of the lateral tibial plateau: a case series with radiostereometric analysis.

We investigated the stability of seven Schatzker type II fractures of the lateral tibial plateau treated by subchondral screws and a buttress plate followed by immediate partial weight-bearing. In order to assess the stability of the fracture, weight-bearing inducible displacements of the fracture fragments and their migration over a one-year period were measured by differentially loaded radiostereometric analysis and standard radiostereometric analysis, respectively. The mean inducible craniocaudal fracture fragment displacements measured -0.30 mm (-0.73 to 0.02) at two weeks and 0.00 mm (-0.12 to 0.15) at 52 weeks. All inducible displacements were elastic in nature under all loads at each examination during follow-up. At one year, the mean craniocaudal migration of the fracture fragments was -0.34 mm (-1.64 to 1.51). Using radiostereometric methods, this case series has shown that in the Schatzker type II fractures investigated, internal fixation with subchondral screws and a buttress plate provided adequate stability to allow immediate post-operative partial weight-bearing, without harmful consequences.

Anatomy of piriformis, obturator internus and obturator externus: implications for the posterior surgical approach to the hip.

We dissected 20 cadaver hips in order to investigate the anatomy and excursion of the trochanteric muscles in relation to the posterior approach for total hip replacement. String models of each muscle were created and their excursion measured while the femur was moved between its anatomical position and the dislocated position. The position of the hip was determined by computer navigation. In contrast to previous studies which showed a separate insertion of piriformis and obturator internus, our findings indicated that piriformis inserted onto the superior and anterior margins of the greater trochanter through a conjoint tendon with obturator internus, and had connections to gluteus medius posteriorly. Division of these connections allowed lateral mobilisation of gluteus medius with minimal retraction. Analysis of the excursion of these muscles revealed that positioning the thigh for preparation of the femur through this approach elongated piriformis to a maximum of 182%, obturator internus to 185% and obturator externus to 220% of their resting lengths, which are above the thresholds for rupture of these muscles. Our findings suggested that gluteus medius may be protected from overstretching by release of its connection with the conjoint tendon. In addition, failure to detach piriformis or the obturators during a posterior approach for total hip replacement could potentially produce damage to these muscles because of over-stretching, obturator externus being the most vulnerable.

Reduced femoral component subsidence with improved impaction grafting at revision hip arthroplasty.

BACKGROUND: Despite stem subsidence being a major complication of femoral impaction bone grafting in cemented revision hip arthroplasty, few studies have distinguished subsidence at the prosthesis-cement interface from that at the cement-bone interface. It is unknown how technique developments intended to improve the procedure influence stability of the stem. QUESTIONS/PURPOSES: We used a sensitive technique to measure subsidence of a cemented polished collarless double-taper stem at each interface after femoral impaction grafting and compared subsidence, radiographic loosening, complications, and reoperations over three series of hips defined by technique developments. PATIENTS AND METHODS: Three series were defined: Series 1 (n = 23, irradiated allograft), Series 2 (n = 12, double-washed, size-profiled graft, nonirradiated bone, long stems as required), and Series 3 (n = 21, modular tamps). Stem subsidence was analyzed with Ein Bild Röntgen Analyse software. Radiographic loosening, complications, and reoperations were also determined. RESULTS: The median subsidence at 12 months for Series 1, 2, and 3 were 2.1, 0.5, and 0.7 mm at the prosthesis-cement interface and 1.3, 0.1, and 0.1 mm at the cement-bone interface. There were two postoperative Vancouver B periprosthetic fractures in Series 1, four hips were revised for loosening in Series 1, and there were no fractures or loosening in Series 2 and 3 at minimum 2 years' followup. There were no surviving hips radiographically classified as possibly or probably loose. CONCLUSIONS: Evolution in techniques of femoral impaction grafting in this study were associated with reduced subsidence of the stem at both the prosthesis-cement interface and cement-bone interface when compared to the original series. Concurrent with reduced stem subsidence was the absence of periprosthetic fracture, radiographic loosening, and complications requiring rerevision.

Surgical anatomy for pelvic external fixation.

Pelvic external fixators have a high rate of reported complications, most of which relate to pin placement. In this descriptive study, we analyzed the morphology of the ilium in cadaveric specimens and compared these with the measures obtained from normal human pelvic computer tomograph scans, and how these related to each of the three basic configurations of pin positioning for the external fixation of a pelvis: anterosuperior (Slätis type), anteroinferior (supra-acetabular), and subcristal. The irregular shape and size of the iliac wing and the abdominal wall overlying the pin's insertion site could hinder accurate placement of anterosuperior pins. Potential disadvantages of the use of anteroinferior pins was found related to the deep location of the anterior inferior iliac spine, interference with the hip flexion area, risk of hip joint penetration, and the variable obliquity of the ilium. As subcristal pins are positioned between two superficial bony landmarks of the iliac crest, our findings suggest that they are more likely to have a correct placement and avoid complications.