Reactive Paper Spray Ionization Mass Spectrometry for Rapid Detection of Estrogens in Cosmetics.

Rapid detection of harmful estrogens in cosmetics is essential in protecting public health. To reduce time-consuming pretreatment and analytical procedures, a novel reactive paper spray ionization mass spectrometry (RPSI-MS) methodology was developed. RPSI-MS is suitable for quantitatively analyzing estrogens in cosmetics by utilizing an online derivatization reaction between estrogens and 2-fluoro-1-methyl-pyridinium-p-toluene-sulfonate (FluMP). Using estradiol valerate as the internal standard (I.S.), three estrogens, estradiol, estriol, and ethinyloestradiol, in cosmetics were quantitatively characterized within minutes. Multiple parameters were optimized including FluMP concentration and volume, triethylamine amount as well as the drying time. The three estrogens displayed good linearity ranging from 0.002 to 1 µg/mL, with R2 above 0.99. The recovery results of all the estrogens were within 80~111%. The limit of detection (LOD) was 0.001 µg/mL for the three estrogens. Compared to conventional paper spray ionization mass spectrometry (PSI-MS), extraction is not required and the detection sensitivity of RPSI-MS was improved by 34,000, 80,000, and 1400 times for estradiol, estriol, and ethinyloestradiol, respectively. The protocol established in this paper is sensitive, eco-friendly, and suitable for rapid testing of estrogens in cosmetics.

Rapid Detection of Estrogens in Cosmetics by Chemical Derivatization and Paper-Spray Ionization Mass-Spectrometry.

Estrogens in personal care products are harmful to customers. Conventional methods such as HPLC and LC-MS require tedious sample pretreatment and long analytical time. Paper-spray ionization mass spectrometry (PSI-MS) is a powerful tool for the determination of compounds with little time and minimal pretreatment procedures. Since most estrogens show poor responses in PSI-MS, we developed a chemical derivatization and PSI-MS method to determinate three estrogens: estradiol, estriol and ethinyloestradiol with estradiol valerate as the internal standard (I.S.). After derivatization with 2-fluoro-1-methyl-pyridinium-p-toluene-sulfonate, the three estrogens could be quantified in seconds. This method showed good linearity in the range of 0.1~30 µg·mL-1, with R2 > 0.999. Their recovery results were all between 85%~115%. The limits of detection (LOD) were 0.04 µg·mL-1, 0.02 µg·mL-1 and 0.02 µg·mL-1 for estradiol, estriol and ethinyloestradiol respectively, which improved around 200, 2000, and 900 times compared to non-derivative PSI-MS. The method could quantitatively determine estrogens in cosmetics.