3D printing feasibility of a controlled dynamization device for external circular fixation.

AIM: to assess the small-scale 3D printing feasibility and cost estimation of a device for controlled dynamization. MATERIALS AND METHOD: The two-part device previously developed by our research group was printed with a carbon fiber-reinforced nylon filament (Gen3 CarbonX™ PA6+CF, 3DXTECH Additive Manufacturing) by a professional 3D printer (FUNMAT HT, Intamsys). Electricity, material, and labor costs for production in a Brazilian city in the Santa Catarina state were calculated. RESULTS: The devices for controlled dynamization were successfully printed in accordance with the planned design and dimensions. Six out of 38 printed devices presented defects in the bolt hole and were discarded. The average printing time per device was 1.9 h. The average electricity, material, and labor costs per printed device were respectively US$0.71, US$13.55, and US$3.04. The total production cost per device reaches approximately US$20 by adding the average cost of defective devices (15 %). CONCLUSION: 3D printing of the controlled dynamization device is feasible and its cost seems affordable to most healthcare services, which could optimize the consolidation of diaphyseal fractures and reduce treatment time for patients.

The parallax effect and magnification on daily orthopedic trauma radiographs / O efeito paralaxe e magnificação sobre radiografias do cotidiano do trauma ortopédico

Objective: To identify the parallax effect on radiographs of upper and lower limbs in everyday orthopedics. Methods: This was an experimental, descriptive-theoretical study, with data analysis of digital radiographs from a tertiary trauma hospital in southern Brazil. Results: The parallax effect and magnification recorded different degrees of deformation, in the analysis of radiographs of the upper limbs, the AP radiograph of the shoulder showed greater degrees of distortion at a predetermined point (4.00%), in lower limbs the pelvis showed a greater degree of magnification (7.85%). Conclusions: There was a positive association between image magnification and the size of the film or structure to be analyzed. The parallax effect has a significant impact on image distortion in the context of orthopedic trauma. Level of Evidence III.

Objetivo: Identificar o efeito paralaxe sobre radiografias de membros superiores e inferiores do cotidiano ortopédico. Métodos: Este foi um estudo experimental, descritivo-teórico, com análise de dados de radiografias digitais de um hospital de trauma terciário sul-brasileiro. Resultados: O efeito paralaxe e magnificação registrou diferentes graus de deformação, em análise de radiografias de membros superiores a radiografia em AP do ombro apresentou maior graus de distorção em um ponto pré-determinado (4,00%), em membros inferiores a pelve apresentou maior grau de magnificação (7,85%). Conclusões: Houve uma associação positiva entre a magnificação de imagem e o tamanho do filme ou estrutura a ser analisada. O efeito paralaxe tem impacto significativo sobre a distorção de imagens no contexto de trauma ortopédico. Nível de evidência III. Estudo diagnóstico ­ investigação de um exame para diagnóstico, - estudo com pacientes não consecutivos, sem padrão de referência ouro.

Prevalence of radiographic findings in chronic osteomyelitis.

BACKGROUND: Simple radiography in conjunction with pertinent medical history and a comprehensive physical examination is typically adequate for diagnosing chronic osteomyelitis (CO). However, radiographic manifestations of CO lack specificity; therefore, the concordance among specialists in this regard has not been systematically assessed. This study aimed to compare and evaluate the proficiency of orthopedic surgeons and radiologists in identifying radiographic indicators present in simple radiographs for diagnosing CO. METHODS: This cross-sectional study was a correlational investigation utilizing plain radiographs obtained from a cohort of 60 patients diagnosed with CO. Comprehensive assessments of the demographic and clinical characteristics, comorbidities, and microbiological parameters were conducted. Additional variables included the anatomical location of the CO, existence of fistulas, disease duration, and presence of pseudoarthrosis. This study meticulously documented the presence or absence of six specific findings: bone destruction, which incorporates erosion and radiolucencies around implants; bone sclerosis; cortical thinning concomitant with erosion; cortical thickening; sequestrum formation; and soft-tissue swelling. RESULTS: Most patients were men (75%), with a mean age of 45.1 years. Hematogenous etiology of CO represented 23%. Bone sclerosis (71.3%) and cortical thickening (67.7%) were the most common radiographic findings, followed by soft-tissue swelling (51.3%), sequestration (47.3%), bone destruction (33.3%), and cortical erosion (30.3%). The mean agreement was 74.2%, showing a marked disagreement rate of 25.8% among all radiographic findings. The presence or absence of soft tissue edema, a prominent radiographic finding that was more important than the other findings, showed the greatest disagreement. CONCLUSIONS: Radiographic findings in CO were universally observed in all patients, demonstrating a high degree of concordance among specialists, with the exception of soft tissue swelling.

Evaluation of silver nanoparticle-impregnated PMMA loaded with vancomycin or gentamicin against bacterial biofilm formation.

INTRODUCTION: Bone cement containing vancomycin or gentamicin is a therapeutic strategy for combating orthopedic infections: however, the activity of these antibiotics is narrow. Silver nanoparticles (AgNPs) are nanocomponents with a wide spectrum, including multidrug-resistant bacteria. In the present study, we aimed to evaluate the effect of AgNP-loaded polymethylmethacrylate (PMMA) on biofilm formation by Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus epidermidis. METHODS: The effect of AgNP-loaded PMMA with and without vancomycin or gentamicin on biofilm production was quantitatively analyzed. S. aureus, E. coli, P. aeruginosa, and S. epidermidis were included as biofilm-producing microorganisms in the in vitro model. RESULTS: AgNP-loaded PMMA with antibiotics reduced the number of colony-forming units (CFUs; p<0.001). However, AgNP-loaded PMMA alone did not significantly reduce biofilm formation. CONCLUSION: Our study demonstrated the potential of AgNP-loaded PMMA. Notably, we observed that AgNP-loaded PMMA containing vancomycin or gentamycin exhibited significantly superior efficacy, with satisfactory activity against most biofilm-forming microbial agents examined.

PROXIMAL HUMERAL LOCKING PLATE: A VIABLE ALTERNATIVE FOR FIXATION OF DISTAL FEMORAL FRACTURES IN CHILDREN.

Distal femoral metaphyseal fractures are rare in children, and the proximity of the fracture to the growth plate makes their approach challenging. Objective: Evaluate outcomes and complications of treatment of distal femoral metaphyseal fractures in children with proximal humeral locking plates. Method: Retrospective study between 2018 and 2021, including seven patients. The analysis included general characteristics, trauma mechanism, classification, clinical and radiographic outcomes, and complications. Results: The mean follow-up was 20 months, the average age was nine years, five patients were boys, and six fractured on the right side. Five fractures were caused by car accidents, one by falling from their own height and one by playing soccer. Five fractures were classified as 33-M/3.2 and two as 33-M/3.1. Three fractures were open, Gustilo IIIA. All seven patients recovered mobility and resumed their pre-trauma activities. All seven healed, and one fracture was reduced to 5 degrees valgus, without any other complications. Six patients had the implant removed and did not present refracture. Conclusion: Treatment of distal femoral metaphyseal fractures with proximal humeral locking plates is a viable option that offers good results and fewer complications, saving the epiphyseal cartilage. Level of Evidence II; Controlled study without randomization.

As fraturas metafisárias distais do fêmur são raras em crianças, a proximidade da fratura com a placa de crescimento torna a sua abordagem desafiadora. Objetivo: Avaliar resultados e complicações do tratamento das fraturas da metáfise distal do fêmur em crianças com placas de úmero proximal. Método: Estudo retrospectivo entre 2018 e 2021 incluindo sete pacientes. A análise incluiu características gerais, mecanismo do trauma, classificação, resultados clínicos, radiográficos e complicações. Resultados: A média do acompanhamento foi de 20 meses, a idade média foi de nove anos, cinco pacientes eram meninos e seis fraturas do lado direito. Cinco fraturas por acidentes automobilísticos, uma por queda da própria altura e uma jogando futebol. Cinco fraturas classificadas como 33-M/3,2 e duas como 33-M/3,1. Três fraturas foram expostas, Gustilo IIIA. Todos os sete pacientes recuperaram a mobilidade e retomaram às atividades anteriores ao trauma. Todas as sete fraturas consolidaram, uma fratura foi reduzida com valgo de 5 graus, e não houveram outras complicações. Seis pacientes tiveram o implante removido e não apresentaram refratura. Conclusão: O tratamento das fraturas da metáfise distal do fêmur com placas de úmero proximal é uma opção viável que oferece bons resultados com poucas complicações, poupando a cartilagem epifisária. Nível de Evidência II; Estudo controlado sem randomização.

Application of 3D Printing Technology in the Treatment of Hoffa's Fracture Nonunion.

Objective To evaluate a proposed three-dimensional (3D) printing process of a biomodel developed with the aid of fused deposition modeling (FDM) technology based on computed tomography (CT) scans of an individual with nonunion of a coronal femoral condyle fracture (Hoffa's fracture). Materials and Methods Thus, we used CT scans, which enable the evaluation of the 3D volumetric reconstruction of the anatomical model, as well as of the architecture and bone geometry of sites with complex anatomy, such as the joints. In addition, it enables the development of the virtual surgical planning (VSP) in a computer-aided design (CAD) software. This technology makes it possible to print full-scale anatomical models that can be used in surgical simulations for training and in the choice of the best placement of the implant according to the VSP. In the radiographic evaluation of the osteosynthesis of the Hoffa's fracture nonunion, we assessed the position of the implant in the 3D-printed anatomical model and in the patient's knee. Results The 3D-printed anatomical model showed geometric and morphological characteristics similar to those of the actual bone. The position of the implants in relation to the nonunion line and anatomical landmarks showed great accuracy in the comparison of the patient's knee with the 3D-printed anatomical model. Conclusion The use of the virtual anatomical model and the 3D-printed anatomical model with the additive manufacturing (AM) technology proved to be effective and useful in planning and performing the surgical treatment of Hoffa's fracture nonunion. Thus, it showed great accuracy in the reproducibility of the virtual surgical planning and the 3D-printed anatomical model.

Skeletal changes of the axial axis and lower limbs in overweight children and adolescents.

OBJECTIVE: To evaluate the presence of axial skeletal deviations in children and adolescents and to relate them to body mass index (BMI), age and sex. METHODS: 101 patients aged 7 to 17 years old were included in this study; exclusion criteria were primary orthopedic diseases and syndromes or treatments that affect growth. Patients were grouped according to their BMI Z-score: eutrophic (n=29), overweight (n=18) and obese (n=54). They underwent static clinical inspection was made by simetrographic technique. Intermaleolar distance was obtained, Adam's forward bend and tiptoe tests were performed. RESULTS: When comparing obese and eutrophic patients, changes in the cervical spine (p<0.01), spine (p<0.001), hip (p<0.01) and shoulders (p<0.001) were present in more than half of the obese patients (62.5%, 62.2%, 79.9% and 55.4%, respectively). Changes in the knees were more frequent among obese (p<0.001) when compared to eutrophic patients. There was no variation regarding age or sex (p>0.05). CONCLUSIONS: being overweight influences skeletal deviations in children and adolescents.

An Overview of 3D Anatomical Model Printing in Orthopedic Trauma Surgery.

Introduction: 3D object printing technology is a resource increasingly used in medicine in recent years, mainly incorporated in surgical areas like orthopedics. The models made by 3D printing technology provide surgeons with an accurate analysis of complex anatomical structures, allowing the planning, training, and surgery simulation. In orthopedic surgery, this technique is especially applied in oncological surgeries, bone, and joint reconstructions, and orthopedic trauma surgeries. In these cases, it is possible to prototype anatomical models for surgical planning, simulating, and training, besides printing of instruments and implants. Purpose: The purpose of this paper is to describe the acquisition and processing from computed tomography images for 3D printing, to describe modeling and the 3D printing process of the biomodels in real size. This paper highlights 3D printing with the applicability of the 3D biomodels in orthopedic surgeries and shows some examples of surgical planning in orthopedic trauma surgery. Patients and Methods: Four examples were selected to demonstrate the workflow and rationale throughout the process of planning and printing 3D models to be used in a variety of situations in orthopedic trauma surgeries. In all cases, the use of 3D modeling has impacted and improved the final treatment strategy. Conclusion: The use of the virtual anatomical model and the 3D printed anatomical model with the additive manufacturing technology proved to be effective and useful in planning and performing the surgical treatment of complex articular fractures, allowing surgical planning both virtual and with the 3D printed anatomical model, besides being useful during the surgical time as a navigation instrument.

Application of 3D Printing Technology in the Treatment of Hoffa's Fracture Nonunion / Aplicação da tecnologia de impressão 3D no tratamento da pseudartrose da fratura de Hoffa

Abstract Objective To evaluate a proposed three-dimensional (3D) printing process of a biomodel developed with the aid of fused deposition modeling (FDM) technology based on computed tomography (CT) scans of an individual with nonunion of a coronal femoral condyle fracture (Hoffa's fracture). Materials and Methods Thus, we used CT scans, which enable the evaluation of the 3D volumetric reconstruction of the anatomical model, as well as of the architecture and bone geometry of sites with complex anatomy, such as the joints. In addition, it enables the development of the virtual surgical planning (VSP) in a computer-aided design (CAD) software. This technology makes it possible to print full-scale anatomical models that can be used in surgical simulations for training and in the choice of the best placement of the implant according to the VSP. In the radiographic evaluation of the osteosynthesis of the Hoffa's fracture nonunion, we assessed the position of the implant in the 3D-printed anatomical model and in the patient's knee. Results The 3D-printed anatomical model showed geometric and morphological characteristics similar to those of the actual bone. The position of the implants in relation to the nonunion line and anatomical landmarks showed great accuracy in the comparison of the patient's knee with the 3D-printed anatomical model. Conclusion The use of the virtual anatomical model and the 3D-printed anatomical model with the additive manufacturing (AM) technology proved to be effective and useful in planning and performing the surgical treatment of Hoffa's fracture nonunion. Thus, it showed great accuracy in the reproducibility of the virtual surgical planning and the 3D-printed anatomical model.

Resumo Objetivo Avaliar uma proposta de processo de impressão tridimensional (3D) de um biomodelo preparado com o auxílio da tecnologia de modelagem por deposição de material fundido (fused deposition modeling, FDM, em inglês) a partir de imagens de tomografia computadorizada (TC) de um indivíduo com pseudartrose de fratura coronal do côndilo femoral (fratura de Hoffa). Materiais e Métodos Para tanto, utilizamos imagens de TC, que permitem estudar a reconstrução volumétrica 3D do modelo anatômico, além da arquitetura e geometria óssea de sítios de anatomia complexa, como as articulações. Também permite o planejamento cirúrgico virtual (PCV) em um programa de desenho assistido por computador (computer-aided design, CAD, em inglês). Essa tecnologia possibilita a impressão de modelos anatômicos em escala real que podem ser utilizados em simulações cirúrgicas para o treinamento e a escolha do melhor posicionamento do implante de acordo com o PCV. Na avaliação radiográfica da osteossíntese da pseudartrose de Hoffa, verificou-se a posição do implante no modelo anatômico impresso em 3D e no joelho do paciente. Resultados O modelo anatômico impresso em 3D apresentou características geométricas e morfológicas semelhantes às do osso real. O posicionamento dos implantes em relação à linha de pseudartrose e pontos anatômicos foram bastante precisos na comparação do joelho do paciente com o modelo anatômico impresso em 3D. Conclusão A utilização do modelo anatômico virtual e do modelo anatômico impresso em 3D com a tecnologia de manufatura aditiva (MA) foi eficaz e auxiliou o planejamento e a realização do tratamento cirúrgico da pseudartrose da fratura de Hoffa. Desta forma, foi bastante preciso na reprodutibilidade do planejamento cirúrgico tanto virtual quanto no modelo anatômico impresso em 3D.

Skeletal changes of the axial axis and lower limbs in overweight children and adolescents / Alterações esqueléticas do eixo axial e de membros inferiores em crianças e adolescentes com excesso de peso

Abstract Objective: To evaluate the presence of axial skeletal deviations in children and adolescents and to relate them to body mass index (BMI), age and sex. Methods: 101 patients aged 7 to 17 years old were included in this study; exclusion criteria were primary orthopedic diseases and syndromes or treatments that affect growth. Patients were grouped according to their BMI Z-score: eutrophic (n=29), overweight (n=18) and obese (n=54). They underwent static clinical inspection was made by simetrographic technique. Intermaleolar distance was obtained, Adam's forward bend and tiptoe tests were performed. Results: When comparing obese and eutrophic patients, changes in the cervical spine (p<0.01), spine (p<0.001), hip (p<0.01) and shoulders (p<0.001) were present in more than half of the obese patients (62.5%, 62.2%, 79.9% and 55.4%, respectively). Changes in the knees were more frequent among obese (p<0.001) when compared to eutrophic patients. There was no variation regarding age or sex (p>0.05). Conclusions: being overweight influences skeletal deviations in children and adolescents.

RESUMO Objetivo: Avaliar a presença de desvios do esqueleto axial em crianças e adolescentes e relacioná-los com índice de massa corpórea, idade e sexo. Métodos: Fizeram parte deste estudo 101 pacientes de sete a 17 anos, os quais não possuíam doenças ortopédicas primárias, síndromes ou tratamentos que afetassem o crescimento. Os pacientes foram agrupados conforme os escores Z do índice de massa corpórea em: eutróficos (n=29), com sobrepeso (n=18) e obesos (n=54). Foram avaliados por meio da inspeção clínica estática, com simetrógrafo de parede, medida da distância intermaleolar, manobra de Adams e teste da ponta dos pés. Resultados: Quando comparados os pacientes obesos com os eutróficos, alterações de coluna cervical (p<0,01), coluna (p<0,001), quadril (p<0,01) e ombros (p<0,001) ocorreram em mais da metade dos obesos (62,5, 62,2, 79,9 e 55,4%, respectivamente). Alterações nos joelhos foram mais frequentes entre os obesos (p<0,001) quando comparados aos eutróficos. Não houve variação com a idade ou o sexo (p>0,05). Conclusões: Conclui-se que o excesso de peso exerce influência sobre desvios do esqueleto em crianças e adolescentes.

Proximal humeral locking plate: a viable alternative for fixation of distal femoral fractures in children / Placa de fixação de úmero proximal: uma alternativa para fixação de fraturas do fêmur distal em criança

ABSTRACT Distal femoral metaphyseal fractures are rare in children, and the proximity of the fracture to the growth plate makes their approach challenging. Objective Evaluate outcomes and complications of treatment of distal femoral metaphyseal fractures in children with proximal humeral locking plates. Method Retrospective study between 2018 and 2021, including seven patients. The analysis included general characteristics, trauma mechanism, classification, clinical and radiographic outcomes, and complications. Results The mean follow-up was 20 months, the average age was nine years, five patients were boys, and six fractured on the right side. Five fractures were caused by car accidents, one by falling from their own height and one by playing soccer. Five fractures were classified as 33-M/3.2 and two as 33-M/3.1. Three fractures were open, Gustilo IIIA. All seven patients recovered mobility and resumed their pre-trauma activities. All seven healed, and one fracture was reduced to 5 degrees valgus, without any other complications. Six patients had the implant removed and did not present refracture. Conclusion Treatment of distal femoral metaphyseal fractures with proximal humeral locking plates is a viable option that offers good results and fewer complications, saving the epiphyseal cartilage. Level of Evidence II; Controlled study without randomization.

RESUMO As fraturas metafisárias distais do fêmur são raras em crianças, a proximidade da fratura com a placa de crescimento torna a sua abordagem desafiadora. Objetivo Avaliar resultados e complicações do tratamento das fraturas da metáfise distal do fêmur em crianças com placas de úmero proximal. Método Estudo retrospectivo entre 2018 e 2021 incluindo sete pacientes. A análise incluiu características gerais, mecanismo do trauma, classificação, resultados clínicos, radiográficos e complicações. Resultados A média do acompanhamento foi de 20 meses, a idade média foi de nove anos, cinco pacientes eram meninos e seis fraturas do lado direito. Cinco fraturas por acidentes automobilísticos, uma por queda da própria altura e uma jogando futebol. Cinco fraturas classificadas como 33-M/3,2 e duas como 33-M/3,1. Três fraturas foram expostas, Gustilo IIIA. Todos os sete pacientes recuperaram a mobilidade e retomaram às atividades anteriores ao trauma. Todas as sete fraturas consolidaram, uma fratura foi reduzida com valgo de 5 graus, e não houveram outras complicações. Seis pacientes tiveram o implante removido e não apresentaram refratura. Conclusão O tratamento das fraturas da metáfise distal do fêmur com placas de úmero proximal é uma opção viável que oferece bons resultados com poucas complicações, poupando a cartilagem epifisária. Nível de Evidência II; Estudo controlado sem randomização.

Detecting bone lesions in the emergency room with medical infrared thermography.

INTRODUCTION: Low- to high-energy impact trauma may cause from small fissures up to extended bone losses, which can be classified as closed or opened injuries (when they are visible at a naked eye). OBJECTIVE: The aim of this study was to investigate the feasibility of clinical diagnosis of bone trauma through medical infrared thermography, in a hospital emergency room. METHODS: Forty-five patients with suspected diagnosis of bone fracture were evaluated by means of medical infrared images, and the data correlated with the gold standard radiographic images, in the anteroposterior, lateral, and oblique views, at the orthopedic emergency department. The control group consisted of thermal images of the contralateral reference limb of the volunteers themselves. Data were acquired with a medical grade infrared camera in the regions of interest (ROIs) of leg, hand, forearm, clavicle, foot, and ankle. RESULTS: In all patients evaluated with a diagnosis of bone fracture, the mean temperature of the affected limb showed a positive difference greater than 0.9 °C (towards the contralateral), indicating the exact location of the bone trauma according, while the areas diagnosed with reduced blood supply, showed a mean temperature with a negative variation. CONCLUSION: Clinical evaluation using infrared imaging indicates a high applicability potential as a tool to support quick diagnosis of bone fractures in patients with acute orthopedic trauma in an emergency medical setting. The thermal results showed important physiological data related to vascularization of the bone fracture and areas adjacent to the trauma well correlated to radiographic examinations.

Forehead, Temple and Wrist Temperature Assessment of Ethnic Groups using Infrared Technology.

Non-contact infrared sensors are widely used as a diagnostic tool for elevated body temperature during initial screening for coronaviruses. The aim of this study was to investigate the thermal differences at three anatomical points: temple, forehead, and wrist, in the initial screening for temperature indicative of febrile and non-febrile states in skin pigmentation variations in Black, Half-Black and Caucasian skins, correlated with height and weight variables. Temperatures were obtained by means of an infrared thermometer in 289 volunteers with mean age of 18.30 ± 0.76, in a controlled environment according to Singapore Standard, SS582 part 1 and 2, normative standard IEC 80601-2-59, with standard technical protocols established by the International Organization for Standardization, ISO / TR 13154. The data were processed in MATLAB® R2021a, and data normality verified by Kolmogorov-Smirnov test, non-parametric data paired between temple / forehead / wrist were compared using the Wilcoxon signed-rank test. The results show different median temperatures in these anatomical regions, 37.2°C at the temple, 36.8°C at the forehead and 36.4°C at the wrist. As the temple region presents a temperature higher than the other investigated regions and, therefore, close to the core temperature, it should be considered for the initial screening of SARS-CoV-2 when using non-contact infrared thermometers. Furthermore, no significant changes were found due to variation in skin tone, height, or weight.

TREATMENT OF TRIPLANE FRACTURE ANKLE FRACTURES ASSOCIATED WITH IPSILATERAL TIBIAL FRACTURES USING A NOVEL APPROACH.

OBJECTIVE: The aim of this study is to purpose a novel approach to the concomitant triplanar and tibial shaft fracture. METHODS: Retrospective study between 2001 and 2019. We collected the patients' general information, clinical and radiographic data, and complications after the following three-step treatment: (1) fixation of the Salter-Harris II fracture of the triplane fracture, (2) fixation of the Salter-Harris II/IV fracture with cannulated screws, and (3) fixation of the tibial fracture with flexible titanium nails. RESULTS: The study included seven patients (six males) with a mean age of 14 years and a mean follow-up of 6.4 years (minimum two years). Five triplane fractures had two fragments and two had three fragments. Five fractures were classified as Salter-Harris II and two as Salter-Harris IV. Three tibial fractures were long oblique, three were spiral, and one had a third fragment. Six fractures affected the middle third and one affected the distal third of the tibia. All triplane and tibial fractures consolidated without significant displacement. No physeal damage was identified. CONCLUSIONS: This study described the association of tibial fractures with triplane ankle fractures managed by our proposed treatment, which proved to be effective for this fracture association. Level of Evidence IV, Case Series.

OBJETIVO: Propor uma nova abordagem para fraturas concomitantes da diáfise da tíbia e triplanares do tornozelo. MÉTODOS: Estudo retrospectivo entre 2001 e 2019. Foram coletadas informações gerais: dados clínicos, radiográficos e complicações. As fraturas seguiram três passos no tratamento: (1) fixação do fragmento Salter-Harris tipo III da fratura triplanar; (2) fixação do fragmento Salter-Harris II/IV com parafuso canulado; e (3) fixação da fratura diafisária da tíbia com hastes flexíveis. RESULTADOS: O estudo incluiu sete pacientes (seis homens) com idade média de 14 anos e seguimento médio de 6.4 anos (mínimo de dois anos). Cinco fraturas triplanares tinham dois fragmentos principais e duas tinham três fragmentos. Cinco fraturas na radiografia em perfil foram classificadas como Salter-Harris II e duas como Salter-Harris IV. Três fraturas diafisárias tibiais tinham traço obliquo longo, três traço espiral e uma fratura com terceiro fragmento. Seis fraturas eram do terço médio e uma fratura do terço distal da tíbia. Todas as fraturas triplanares e tibiais consolidaram sem desvio significativo e não tivemos nenhuma lesão fisária. CONCLUSÃO: O estudo descreveu a associação da fratura da tíbia com a fratura triplanar do tornozelo e nossa proposta de tratamento, que se mostrou uma boa opção no tratamento dessa fratura especial. Nível de Evidência IV, Série de casos.

Treatment of triplane fracture ankle fractures associated with ipsilateral tibial fractures using a novel approach / Fratura triplanar do tornozelo concomitante a fratura ipsilateral da tíbia. uma nova abordagem

ABSTRACT Objective: The aim of this study is to purpose a novel approach to the concomitant triplanar and tibial shaft fracture. Methods: Retrospective study between 2001 and 2019. We collected the patients' general information, clinical and radiographic data, and complications after the following three-step treatment: (1) fixation of the Salter-Harris II fracture of the triplane fracture, (2) fixation of the Salter-Harris II/IV fracture with cannulated screws, and (3) fixation of the tibial fracture with flexible titanium nails. Results: The study included seven patients (six males) with a mean age of 14 years and a mean follow-up of 6.4 years (minimum two years). Five triplane fractures had two fragments and two had three fragments. Five fractures were classified as Salter-Harris II and two as Salter-Harris IV. Three tibial fractures were long oblique, three were spiral, and one had a third fragment. Six fractures affected the middle third and one affected the distal third of the tibia. All triplane and tibial fractures consolidated without significant displacement. No physeal damage was identified. Conclusions: This study described the association of tibial fractures with triplane ankle fractures managed by our proposed treatment, which proved to be effective for this fracture association. Level of Evidence IV, Case Series.

RESUMO Objetivo: Propor uma nova abordagem para fraturas concomitantes da diáfise da tíbia e triplanares do tornozelo. Métodos: Estudo retrospectivo entre 2001 e 2019. Foram coletadas informações gerais: dados clínicos, radiográficos e complicações. As fraturas seguiram três passos no tratamento: (1) fixação do fragmento Salter-Harris tipo III da fratura triplanar; (2) fixação do fragmento Salter-Harris II/IV com parafuso canulado; e (3) fixação da fratura diafisária da tíbia com hastes flexíveis. Resultados: O estudo incluiu sete pacientes (seis homens) com idade média de 14 anos e seguimento médio de 6.4 anos (mínimo de dois anos). Cinco fraturas triplanares tinham dois fragmentos principais e duas tinham três fragmentos. Cinco fraturas na radiografia em perfil foram classificadas como Salter-Harris II e duas como Salter-Harris IV. Três fraturas diafisárias tibiais tinham traço obliquo longo, três traço espiral e uma fratura com terceiro fragmento. Seis fraturas eram do terço médio e uma fratura do terço distal da tíbia. Todas as fraturas triplanares e tibiais consolidaram sem desvio significativo e não tivemos nenhuma lesão fisária. Conclusão: O estudo descreveu a associação da fratura da tíbia com a fratura triplanar do tornozelo e nossa proposta de tratamento, que se mostrou uma boa opção no tratamento dessa fratura especial. Nível de Evidência IV, Série de casos.

Evaluation of Tibia Bone Healing by Infrared Thermography: A Case Study.

BACKGROUND: Thermal imaging has been used as a clinical follow-up technique in several medical specialties. PURPOSE: The aim of this study was to investigate the feasibility of using medical thermography in the diagnosis and follow-up assessment of a severe orthopedic trauma that requires the use of an external circular fixator. PATIENTS AND METHODS: Twenty clinical follow-ups of thermal imaging correlated with X-ray images were performed in a male volunteer, diagnosed with bone nonunion, during 11 months of treatment, in the hospital trauma and reconstruction department. Data were acquired in the regions of interest of the proximal tibia, diaphysis and distal, with a Flir T530 medical grade infrared camera from Flir Systems®, and the data processed by the Matlab® 2019 custom made software. RESULTS: Statistical analysis was performed by Wilcoxon signed-rank test. The results showed a median temperature of 22.2°C, and thus some periods of interruption in the healing process between the third and twentieth clinical follow-up, and a significant increase of the temperature to 34.6°C synchronous with a diagnosis of bone infection by the eleventh clinical follow-up. The thermal images acquired during the 20 clinical follow-ups allow a correlation with the data from the X-ray exams and also with the contralateral limb of the evaluated patient, showing thermal alterations greater than 0.3°C, which are significant of physiological abnormality. CONCLUSION: The thermography exam can be a useful tool for applying on the follow-up of patients after trauma or bone fracture. The results showed important physiological data related to the vascularization necessary for bone repairing, being therefore a good indicator of the healing process. In addition, as infrared thermography does not use ionizing radiation, it can be used countlessly, in complement to the traditional X-ray exams that focus on anatomical data analysis.

Finite Element Analysis of a Controlled Dynamization Device for External Circular Fixation.

Objective To virtually prototype a device for external circular fixation of long bone fractures with controlled dynamization made of two different materials and predict their mechanical behavior by using the finite element analysis (FEA) method. Method A software was used for 3D modeling two metal parts closely attached by a sliding dovetail joint and a high-density silicone damper. Distinctive FEAs were simulated by considering two different materials (stainless steel or titanium), modes (locked or dynamized) and loading conditions (static/point or dynamic/0.5 sec) with uniform 150 kg axial load on top of the device. Results The finite elements (FEs) model presented 81,872 nodes and 45,922 elements. Considering stainless steel, the maximum stress peak (140.98 MPa) was reached with the device locked under static loading, while the greatest displacement (2.415 × 10 -3 mm) was observed with the device locked and under dynamic loading. Regarding titanium, the device presented the maximum stress peak (141.45 MPa) under static loading and with the device locked, while the greatest displacement (3.975 × 10 -3 mm) was found with the device locked and under dynamic loading. Conclusion The prototyped device played the role of stress support with acceptable deformation in both locked and dynamized modes and may be fabricated with both stainless steel and titanium.

Finite Element Analysis of a Controlled Dynamization Device for External Circular Fixation / Análise de elementos finitos de um dispositivo de dinamização controlada para fixação circular externa

Abstract Objective To virtually prototype a device for external circular fixation of long bone fractures with controlled dynamization made of two different materials and predict their mechanical behavior by using the finite element analysis (FEA) method. Method A software was used for 3D modeling two metal parts closely attached by a sliding dovetail joint and a high-density silicone damper. Distinctive FEAs were simulated by considering two different materials (stainless steel or titanium), modes (locked or dynamized) and loading conditions (static/point or dynamic/0.5 sec) with uniform 150 kg axial load on top of the device. Results The finite elements (FEs) model presented 81,872 nodes and 45,922 elements. Considering stainless steel, the maximum stress peak (140.98 MPa) was reached with the device locked under static loading, while the greatest displacement (2.415 × 10−3 mm) was observed with the device locked and under dynamic loading. Regarding titanium, the device presented the maximum stress peak (141.45 MPa) under static loading and with the device locked, while the greatest displacement (3.975 × 10−3 mm) was found with the device locked and under dynamic loading. Conclusion The prototyped device played the role of stress support with acceptable deformation in both locked and dynamized modes and may be fabricated with both stainless steel and titanium.

Resumo Objetivo Construir um protótipo virtual de um dispositivo de fixação circular externa para fraturas em ossos longos com dinamização controlada a partir de dois materiais diferentes e prever seu comportamento mecânico por meio da análise de elementos finitos AEF). Método Modelos tridimensionais compostos de duas peças metálicas unidas por uma junta deslizante em rabo de andorinha e um amortecedor de silicone de alta densidade foram criados em um software. Análises de elementos finitos distintas foram simuladas considerando dois materiais (aço inoxidável ou titânio), modos (bloqueado ou dinamizado) e condições de carregamento (estático/pontual ou dinâmico/0,5 segundo) diferentes com carga axial uniforme de 150 kg na porção superior do dispositivo. Resultados O modelo de elementos finitos (EFs) apresentou 81.872 nós e 45.922 elementos. Com aço inoxidável, o pico de tensão máxima (140,98 MPa) foi alcançado com o dispositivo bloqueado e sob carga estática, enquanto o maior deslocamento (2.415 × 10−3 mm) foi obtido com o dispositivo bloqueado e sob carga dinâmica. Com titânio, o pico de tensão máxima (141,45 MPa) ocorreu com o dispositivo bloqueado e sob carga estática, enquanto o maior deslocamento (3.975 × 10−3 mm) foi observado com o dispositivo bloqueado e sob carga dinâmica. Conclusão O protótipo do dispositivo desempenhou o papel de suporte de tensão com deformação aceitável nos dois modos, bloqueado ou dinamizado, e pode ser fabricado com aço inoxidável ou titânio.

CHRONIC MONTEGGIA FRACTURE-DISLOCATION IN CHILDREN SURGICAL STRATEGY AND RESULTS.

OBJECTIVE: To report surgical techniques and results in the treatment of chronic Monteggia fracture-dislocation in children. METHODS: Six pediatric patients who had undergone a procedure involving the following 6 crucial surgical steps were retrospectively evaluated: 1- extended lateral approach, 2- fibrotic removal, 3-proximal ulnar osteotomy, 4- reduction of the radial head and transcapitellar temporary fixation, 5- ulnar fixation with a straight plate shaped according to the deformity generated by temporary fixation, and 6- transcapitellar Kirschner wire removal. RESULTS: Four patients were women, and four showed the right-sided compromise. The mean age of patients was 8 years, and the minimum follow-up period was 12 months. The mean time from the onset of fracture to treatment was 6 months. Six patients underwent complete flexo/extension, and one patient had a complete prono-supination. In four patients, we observed loss of pronation (by 10° in two, 15° in one, and 20° in one), and one patient had a 15° decrease in supination. We did not observe any redislocation of the radial head in the follow-up evaluation. No complications were observed; the only complaint was salience of the ulnar plate. CONCLUSIONS: Our results demonstrated an effective option for the treatment of chronic Monteggia fracture-dislocation in children, even with a small study sample, following the presented technical and surgical strategies. Level of evidence IV, Therapeutic Studies.

OBJETIVO: Relatar a técnica cirúrgica e os resultados no tratamento da fratura-luxação de Monteggia crônica nas crianças. MÉTODOS: Análise retrospectiva de seis pacientes submetidos à técnica com seis passos cirúrgicos, a saber: acesso único lateral estendido para o bordo lateral da ulna; capsulotomia e retirada da fibrose e do tecido interposto; osteotomia proximal transversa da ulna; redução da cabeça radial no capítulo e fixação temporária transcapitelar; fixação da ulna com placa reta moldada a deformidade gerada da ulna; retirada do fio de Kirschnner transcapitelar. RESULTADOS: Quatro pacientes eram do sexo feminino, e em quatro o lado direito foi o acometido. O seguimento mínimo foi de 12 meses, e o tempo médio entre a fratura e o tratamento foi de 6 meses. Os seis pacientes obtiveram flexo/extensão completa; em quatro deles, foi observada perda da pronação (dois 10°, um 15° e um 20°) e um paciente teve diminuição de 15° da supinação. Em todos os pacientes, foi obtida redução da cabeça do rádio sem reluxação até o seguimento avaliado. CONCLUSÕES: Mesmo considerando uma pequena amostra, nossos resultados, pela técnica e pelas estratégias cirúrgicas apresentadas, demonstraram opção eficaz no tratamento da fratura-luxação de Monteggia crônica em crianças. Nível de evidência IV, estudo do tipo terapêutico.

Chronic monteggia fracture-dislocation in children surgical strategy and results / Fratura-luxação de monteggia crônica em crianças: estratégia cirúrgica e resultados

ABSTRACT Objective: To report surgical techniques and results in the treatment of chronic Monteggia fracture-dislocation in children. Methods: Six pediatric patients who had undergone a procedure involving the following 6 crucial surgical steps were retrospectively evaluated: 1- extended lateral approach, 2- fibrotic removal, 3-proximal ulnar osteotomy, 4- reduction of the radial head and transcapitellar temporary fixation, 5- ulnar fixation with a straight plate shaped according to the deformity generated by temporary fixation, and 6- transcapitellar Kirschner wire removal. Results: Four patients were women, and four showed the right-sided compromise. The mean age of patients was 8 years, and the minimum follow-up period was 12 months. The mean time from the onset of fracture to treatment was 6 months. Six patients underwent complete flexo/extension, and one patient had a complete prono-supination. In four patients, we observed loss of pronation (by 10° in two, 15° in one, and 20° in one), and one patient had a 15° decrease in supination. We did not observe any redislocation of the radial head in the follow-up evaluation. No complications were observed; the only complaint was salience of the ulnar plate. Conclusions: Our results demonstrated an effective option for the treatment of chronic Monteggia fracture-dislocation in children, even with a small study sample, following the presented technical and surgical strategies. Level of evidence IV, Therapeutic Studies.

RESUMO Objetivo: Relatar a técnica cirúrgica e os resultados no tratamento da fratura-luxação de Monteggia crônica nas crianças. Métodos: Análise retrospectiva de seis pacientes submetidos à técnica com seis passos cirúrgicos, a saber: acesso único lateral estendido para o bordo lateral da ulna; capsulotomia e retirada da fibrose e do tecido interposto; osteotomia proximal transversa da ulna; redução da cabeça radial no capítulo e fixação temporária transcapitelar; fixação da ulna com placa reta moldada a deformidade gerada da ulna; retirada do fio de Kirschnner transcapitelar. Resultados: Quatro pacientes eram do sexo feminino, e em quatro o lado direito foi o acometido. O seguimento mínimo foi de 12 meses, e o tempo médio entre a fratura e o tratamento foi de 6 meses. Os seis pacientes obtiveram flexo/extensão completa; em quatro deles, foi observada perda da pronação (dois 10°, um 15° e um 20°) e um paciente teve diminuição de 15° da supinação. Em todos os pacientes, foi obtida redução da cabeça do rádio sem reluxação até o seguimento avaliado. Conclusões: Mesmo considerando uma pequena amostra, nossos resultados, pela técnica e pelas estratégias cirúrgicas apresentadas, demonstraram opção eficaz no tratamento da fratura-luxação de Monteggia crônica em crianças. Nível de evidência IV, estudo do tipo terapêutico.