Unveiling the power of MXenes: Solid lubrication perspectives and future directions.

The interaction between two surfaces leads to the generation of friction and wear of material. Friction and wear are some of the major challenges that may readily be overcome by the third part of tribology called lubrication. Utilizing solid lubricants including polymers, carbon-based materials, soft metals, transition metal dichalcogenides, along with their potential benefits and drawbacks in dry environments can reduce friction. Recently, an emerging class of two-dimensional (2D) transition metal nitrides, carbides or carbonitrides commonly known as MXenes have emerged as an attractive alternative for solid lubrication because of their ability to establish wear-resistant tribo layers and well as low friction and shear strength. Furthermore, the inherent hydrophilic nature of these substances has led to limited dispersion stability and phase compatibility when combined with pure base oils. As a result, their potential use as solid lubricants and lubricant additives has been impeded. To address this issue and enhance the applicability of MXenes as solid lubricants, their surface modification can be an attractive tool. Therefore, this review provides a succinct summary of the current state-of-the-art in surface functionalization of MXenes, a subject that has not yet been thoroughly addressed. Further, the mechanical behavior of MXenes and composites has been discussed, followed by the potential of MXenes as a solid lubricant at micro- and macro-scale. Finally, the existing opportunities and challenges of the research area have been discussed with possible future research directions. We believe, this article will be a valuable resource for MXenes and opens the door to improve the chemical, physical and mechanical properties of MXenes in various applications, such as solid lubrication.

Experimental and computational approach on the development of a new Green corrosion inhibitor formulation for N80 steel in 20% formic acid.

Organic acids are employed as scale dissolvers in the oil & gas industry during production to stimulate oil recovery by pumping in the formations. Corrosion of metallic surfaces in organic acid solutions poses a significant issue in the oil and gas sector. In recent years, considering the stringent environmental regulations, there has been a growing research interest in environmentally safe inhibitors. This paper explores the synthesis of 2-(3-(carboxymethyl)-1H-imidazol-3-ium-1-yl) acetate (IZ) and its first-time application for corrosion mitigation of N80 steel in 20% formic acid. A detailed experimental study involving gravimetric, electrochemical, and surface analytical techniques is reported herein. The electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) analyses suggest a rise of impedance with IZ and a mixed-type inhibition behavior, respectively. The inhibition efficiency (IE) is 99.54% at 200 mg/L at 308 K, reaching 99.4% at 363 K with the introduction of KI as a synergistic agent. Computational studies revealed that the inhibitor IZ gets protonated in the experimental environment. The protonated form shows a tendency to receive electrons from the metal surface and shows a greater energy of adsorption compared to that of the neutral form.

Ti-30Nb-3Ag alloy with improved corrosion resistance and antibacterial properties for orthopedic and dental applications produced by mechanical alloying.

Titanium alloys have gained popularity as a bioimplant material due to their biocompatibility, low modulus of elasticity, and increased strength. However, other issues, such as corrosion resistance, and infections can reduce the implant's lifespan. This paper aims to fabricate a new Ti-30Nb-3Ag at% alloy with enhanced in vitro corrosion and antibacterial properties by mechanical alloying (MA) followed by powder consolidation. XRD, SEM/EDX, and Vickers microhardness analyses were used to examine the phases compositions, microstructure, and microhardness, respectively. The in vitro corrosion performance of Ti-30Nb-3Ag alloy was inspected in a simulated body medium and artificial saliva. The alloy's antibacterial properties were evaluated in the gram-positive and negative bacterial medium. The results showed that after MA for 60 h, nanocrystalline ß-Ti (BCC) and α-Ti (HCP) solid solutions were formed with crystallite sizes of 7.44 and 3.47 nm, respectively. The sintered sample exhibited densifications of 97%, with a microstructure composed of ß-Ti, α-Ti, and a minor quantity of ultrafine Ti2Ag phase. The microhardness result showed that Ti-30Nb-3Ag alloy possesses HV 491.5. Ti-30Nb-3Ag alloy has a potent antibacterial capability of 85.75% and 88.81% relative to Ti-6Al-4V alloy and CP-Ti, respectively. In vitro corrosion results revealed that the Ti-30Nb-3Ag alloy exhibited the widespread passive area in the investigated anodic regions and presented the highest impedance values in comparison with the commercial alloys, confirming its improved corrosion resistance performance in both studied mediums. Ti-30Nb-3Ag alloy possibly be a competitive bioimplant material for orthopedic and dental uses owing to its enhanced biocorrosion and antibacterial properties compared to commercial Ti-6Al-4V alloy and CP-Ti.

Triazole-modified chitosan: a biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution.

In this work, a new inhibitor, triazole modified chitosan, was synthesized for the first time following chemical modification of chitosan using 4-amino-5-methyl-1,2,4-triazole-3-thiol. The newly synthesized biopolymer (CS-AMT) was characterized using FTIR and NMR, and then it was evaluated as an inhibitor against corrosion of carbon steel in 1 M hydrochloric acid. The corrosion testing and evaluation were performed thoroughly employing the weight loss method, electrochemical measurements and surface analysis. A maximum corrosion inhibition efficiency of >95% was obtained at 200 mg L-1 concentration of inhibitor. The adsorption of inhibitor obeyed the Langmuir isotherm and showed physical and chemical adsorption. The electrochemical study via impedance analysis supported the adsorption of the inhibitor on the surface of carbon steel, and the potentiodynamic polarization indicated a mixed type of inhibitor behavior with cathodic predominance. To get a better insight on the interaction of inhibitor molecules with the metal surface, a detailed theoretical study was performed using DFT calculations, Fukui indices analysis and molecular dynamics (MD) simulation. The DFT study showed a lower energy gap of CS-AMT and the MD simulations showed an increased binding energy of CS-AMT compared to the parent chitosan and triazole moieties thereby supporting the experimental findings.

Thiosemicarbazide and thiocarbohydrazide functionalized chitosan as ecofriendly corrosion inhibitors for carbon steel in hydrochloric acid solution.

Organically functionalized chitosan macromolecules namely Chitosan-Thiosemicarbazide (CS-TS) and Chitosan-Thiocarbohydrazide (CS-TCH) were synthesized and evaluated as new corrosion inhibitors for mild steel corrosion in 1M HCl. The FTIR and 1H NMR studies confirmed the formation of the derivatives. The corrosion tests were performed using weight loss method, electrochemical measurements, surface morphology (AFM), quantum chemical investigation and molecular dynamics simulation methods. The maximum efficiency of 92% was obtained at a concentration as low as 200mgL-1. The inhibitors were found to obey Langmuir adsorption isotherm and exhibited both physical and chemical adsorption. Electrochemical impedance spectroscopy (EIS) results showed an increase in polarization resistance which supported the adsorption of inhibitors on the mild steel surface. Tafel data showed a mixed type behavior with cathodic predominance. The data of quantum chemical calculations and molecular dynamics simulation supported the experimental findings.