Rehabilitation of the atrophic mandible with short implants in different positions: A finite elements study.

OBJECTIVE: The aim of this study was to analyze whether the use of inclined short implants without lower transcortical involvement (test model - SI), thus preserving the mandibular lower cortical bone, could optimize stress distribution. MATERIALS AND METHODS: Six identical atrophic mandible models were created featuring 8mm of height at the symphysis. Two study factors were evaluated: implant length and angulation. Implant length was represented either by short implants (7mm) with preservation of the mandibular lower cortical bone or standard implants (9mm) with a bicortical approach and 3 possible implant positioning configurations: 4 distally-inclined implants at 45° (experimental model), all-on-four, 4 vertical implants. All tridimensional (3D) models were analyzed using the Finite Element Method (FEM) and the Ansys Workbench software. RESULTS: The maximum stress on the bone at the cervical region of the implants in the experimental model was 132MPa and transcortical involvement with implant inclination yielded higher values (171MPa). Regarding von Mises stress on the retaining screw of the prosthesis, 61MPa was recorded for the experimental model while upright implants had the highest values (223MPa). At the acrylic base, 4MPa was recorded for the experimental model whereas models with upright implants showed the highest stress values (11MPa). CONCLUSION: Rehabilitation of severely resorbed mandibles with 4 short implants placed distally at 45°, without lower transcortical involvement, were biomechanically more favorable, generating lower stress peaks, than the models with short implants on an all-on-four, or on an upright configuration, with or without lower transcortical involvement.

Biofilm and saliva affect the biomechanical behavior of dental implants.

Friction coefficient (FC) was quantified between titanium-titanium (Ti-Ti) and titanium-zirconia (Ti-Zr), materials commonly used as abutment and implants, in the presence of a multispecies biofilm (Bf) or salivary pellicle (Pel). Furthermore, FC was used as a parameter to evaluate the biomechanical behavior of a single implant-supported restoration. Interface between Ti-Ti and Ti-Zr without Pel or Bf was used as control (Ctrl). FC was recorded using tribometer and analyzed by two-way Anova and Tukey test (p<0.05). Data were transposed to a finite element model of a dental implant-supported restoration. Models were obtained varying abutment material (Ti and Zr) and FCs recorded (Bf, Pel, and Ctrl). Maximum and shear stress were calculated for bone and equivalent von Misses for prosthetic components. Data were analyzed using two-way ANOVA (p<0.05) and percentage of contribution for each condition (material and FC) was calculated. FC significant differences were observed between Ti-Ti and Ti-Zr for Ctrl and Bf groups, with lower values for Ti-Zr (p<0.05). Within each material group, Ti-Ti differed between all treatments (p<0.05) and for Ti-Zr, only Pel showed higher values compared with Ctrl and Bf (p<0.05). FC contributed to 89.83% (p<0.05) of the stress in the screw, decreasing the stress when the FC was lower. FC resulted in an increase of 59.78% of maximum stress in cortical bone (p=0.05). It can be concluded that the shift of the FC due to the presence of Pel or Bf is able to jeopardize the biomechanical behavior of a single implant-supported restoration.

Adding denture cleanser to microwave disinfection regimen to reduce the irradiation time and the exposure of dentures to high temperatures.

BACKGROUND: The microwave energy is an efficient disinfection method; however, it can generate high temperatures that can result in distortion of the dentures. OBJECTIVES: To evaluate whether the addition of an enzymatic cleanser to microwave disinfection regimen would disinfect dentures with shorter irradiation time. MATERIALS AND METHODS: Seven resin discs colonized with Candida albicans biofilm were placed on the palatal surface of sterile dentures to be randomly assigned to the following treatments: immersion in distilled water for 3 min with 0 (DW), 1 (DW + M1), 2 (DW + M2), or 3 min (DW + M3) of microwave irradiation; or immersion in denture cleanser for 3 min with 0 (DC), 1 (DC + M1), 2 (DC + M2) or 3 min (DC + M3) of irradiation. After the treatments, the viable cells were counted by a blinded examiner. The temperature was measured immediately after irradiation. The data were analyzed by ANOVA and Tukey post hoc tests (α = 0.05). RESULTS: No viable cells were found after DC + M2, DC + M3, and DW + M3 treatments, of which DC + M2 achieved the lowest temperature. No significant difference was found between the effectiveness of DW, DW + M1 and DC treatments (p > 0.05). CONCLUSION: Within the limits of this study, the association of a denture cleanser and microwave energy is efficient to disinfect dentures in lower irradiation time and temperature.

Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing.

PURPOSE: The aim of this study was to evaluate linear dimensional alterations of artificial teeth for complete dentures when using different investment and flasking techniques. BACKGROUND: Dimensional changes in the vertical dimension may occur owing to changes in artificial teeth positioning caused by different investing and flasking techniques. MATERIALS AND METHODS: Thirty pairs of the complete dentures were manufactured and randomly divided into three groups (n = 10): (1) invested with type III stone in monomaxillary PVC flask; (2) invested with type III stone in bimaxillary PVC flask; and (3) invested with laboratory silicone in bimaxillary PVC flask. Dentures were polymerised by microwave, and 12 linear distances were measured before and after denture processing. Data were analysed by one-way anova, considering manufacturing technique as the study factor. Tukey's HSD was used as post hoc ANOVA (p = 0.05). RESULTS: Most of the linear distances were comparable for all groups. All transversal maxillary and mandibular distances were higher for group 1 compared with groups 2 and 3 (p < 0.05), except the distance 3-6 for mandibular arch, in which no difference was found between groups (p < 0.05). Both maxillary diagonal distances were higher in group 1 (p < 0.05), and no differences were found among all groups for mandibular measurements. CONCLUSIONS: Double flasking technique independent on the investment material is shown to be the most effective method to reduce changes in artificial teeth positioning.