Recycling rice husk ash as a filler on biodegradable cassava starch-based foams.

Starch-based foams can be used in packaging development to replace nonbiodegradable petrochemical plastics. However, starch-based materials possess poor mechanical properties and low water resistance. These properties can be improved by adding plasticizers and fillers to the bulk composition. In the present work, the effect of rice husk ash content on physical, morphological, and mechanical properties of cassava starch-based foams produced by thermal expansion was investigated. The composites were formed by mixing cassava starch, rice husk ash (content varying from 0 to 60%), water, and glycerol. The obtained dough was placed in a metallic mold and then expanded in a thermohydraulic press machine. The addition of 20-50% of ash content improved thermal stability, density, and biodegradation of starch-based foams and decreased water absorption capacity. Filled starch-based foams also exhibited smaller pores in internal structure. Compared to foams without ash filler, the addition of 20-40% ash increased the flexural tensile strength and the addition of more than 50% dropped the mechanical resistance. Hence, based on the results obtained, rice husk ash can be a great filler in biodegradable starch-based foams.

Effect of chitosan addition on the properties of films prepared with corn and cassava starches.

Starch and chitosan are biodegradable polymers from renewable sources that can be used to overcome the serious environmental problem caused by improper disposal of synthetic plastic materials, non-biodegradable, derived from petroleum sources. The starch-chitosan based films manufactured allow improving the better characteristics of each one, adding their good characteristics and compensating for some limitations. In this work, it was studied: two sources of starch (corn and cassava), two different modes of chitosan addition (chitosan blended in the starch filmogenic solution and chitosan as coating), and the effect of glutaraldehyde as crosslinking agent. All films were prepared by casting using glycerol as a plasticizer and were characterized by their physicochemical (water vapor permeability, water contact angle, and FTIR), mechanical, and antimicrobial properties. The properties analyzed were influenced by all variables tested. Moreover, the principal component analysis was also conducted in order to relate and describe the variables analyzed. The antimicrobial activity of the corn starch-based films containing chitosan was confirmed, and these films have potential for development of active packaging.

Valorisation of blueberry waste and use of compression to manufacture sustainable starch films with enhanced properties.

Blueberry waste from juice processing was valorised to develop starch films by compression moulding. The compression process resulted in hydrophobic films with water contact angles even higher than 100° for the films prepared with the highest blueberry waste content. Additionally, the film solubility was reduced by the incorporation of blueberry waste, regardless of the solution pH. These films also exhibited good barrier properties against UV light due to the aromatic compounds present in the blueberry waste. Furthermore, films showed a homogenous surface, although some pores appeared in the cross-section for the films with the highest blueberry waste content. Results highlighted the use of thermo-mechanical processes such as compression to manufacture sustainable films with enhanced properties through waste valorisation by the techniques actually employed at industrial scale.

Development and characterization of cassava starch films incorporated with blueberry pomace.

This work is focused on the development of renewable and biodegradable films by the valorisation of wastes from food processing industries, with the aim of contributing to the development of more sustainable films. In this context, different contents of blueberry pomace (BP) were incorporated into cassava starch (CS) film forming solutions and the functional properties of the films prepared by solution casting were investigated, specifically, thermal, optical and physicochemical properties. BP-incorporated films showed good barrier properties against light, indicating their beneficial effect to prevent food deterioration caused by UV radiation when these films are used for food packaging applications. These results were related to the presence of aromatic compounds in BP, which can absorb light at wavelengths below 300nm. Furthermore, all films maintained their structural integrity after immersion in water (24h) and the maximum swelling displayed was lower than 300%. Additionally, the release of active compounds from BP into food simulants (after 10days) showed higher migration into the acetic acid medium in comparison with the ethanol medium. Therefore, the incorporation of BP into CS film forming solution resulted in the improvement of film performance, suggesting the potential application of these films as active packaging.

Effect of blueberry agro-industrial waste addition to corn starch-based films for the production of a pH-indicator film.

Intelligent packaging is an emerging area of food technology that can provide better preservation and be of further convenience for consumers. It is recommended that biodegradable materials be used to develop low-impact designs for better packaging, which could benefit the environment by simply expanding their use to new areas. In this work, corn starch, glycerol and blueberry powder (with and without prior fruit bleaching) were used to produce films by casting. Blueberry powder, a co-product from juice processing, which is rich in anthocyanins, was added in the films to evaluate its potential as a colorimetric indicator, due to the ability of anthocyanin to change color when placed in an acidic or basic environment. After the films were immersed in different buffer solutions, visual color changes were observed, where the films became reddish at acidic pH and bluish at basic pH. The ΔE* values were greater than 3, suggesting a visually perceptible change to the human eye. The samples with fruit bleaching (CB) were visually darker (lower luminance values), while the samples without bleaching (SB) had a lighter color and higher brightness, represented by larger L* values. These results indicate the potential of blueberry powder as a pH indicator for intelligent food packaging or even for sensing food deterioration.

Caracterização física, química e sensorial de sobremesas à base de soja, elaboradas com mucilagem de chia / Physical, chemical and sensory characterization of soy-based desserts made with chia mucilage

No desenvolvimento de produtos, é de suma importância o conhecimento da influência das modificações da formulação nas propriedades sensoriais, físicas e químicas destes. O objetivo deste trabalho foi caracterizar sobremesas à base de soja com e sem adição de mucilagem de chia, utilizada como espessante alimentar. As formulações foram caracterizadas quanto as suas propriedades reológicas, °Brix, pH e cor. O perfil sensorial foi determinado por Análise Descritiva Quantitativa (ADQ), utilizando-se uma equipe de 10 julgadores treinados. Os resultados mostraram que as amostras não diferiram quanto aos valores de pH, °Brix e coordenada cromática a*. Quanto aos outros parâmetros de cor e reológicos, foram detectadas diferenças significativas entre as amostras, o que mostra a influência do tipo de espessante nestas características. Os resultados da ADQ mostraram que as amostras não apresentaram diferenças estatísticas quanto aos atributos, cor rosa, sabor de goiaba, sabor de soja e cremosidade, porém diferiram quanto à consistência. Com isso, conclui-se que a adição da mucilagem de chia pode ser feita sem causar grandes modificações ao produto.

In product development is important to study the influence of ingredients in the physical, chemical and sensory properties of the product. The aim of this study was to characterize soy-based desserts with and without addition of chia mucilage, used as food thickener. The formulations were characterized for their rheological properties, °Brix, pH and color. The sensory profile was determined by Quantitative Descriptive Analysis (QDA) using 10 trained judges. The results regarding to pH, ° Brix and color coordinate a* did not differ. Unlike these parameters, the other chromaticity coordinates and the rheological properties presented significant statistical differences between the samples. The QDA results showed that the samples did not differ as to the attributes, color, pink guava flavor, creaminess and flavor of soy, but differed in consistency. Thus, it is concluded that the addition of mucilage chia can be made without causing major changes to the product.

Study on the stability of ß-carotene microencapsulated with pinhão (Araucaria angustifolia seeds) starch.

Native and hydrolyzed pinhão starches were used as coating materials for ß-carotene microencapsulation by freeze-drying. The purpose of the present study was to evaluate the stability of ß-carotene encapsulated under three different conditions: in the presence of ultraviolet light at 25±2 °C, in the dark at 25±2 °C and in the dark at 10.0±0.2 °C. The color of the samples was also analyzed. Microcapsules prepared with native starch showed the lowest stability during storage. In contrast, microcapsules encapsulated with 12 dextrose equivalent (DE) hydrolyzed starch exhibited the highest stability. First-order kinetic and Weibull models were applied to describe the degradation of ß-carotene over time. The R(2) values of the Weibull model were greater than those of the first-order kinetic model. Moreover, multivariate analyses (principal component and cluster analyses) were also conducted.