Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 52
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Chemphyschem ; 25(12): e202400077, 2024 Jun 17.
Artigo em Inglês | MEDLINE | ID: mdl-38709643

RESUMO

The UV/Vis absorption energies νmax of Reichardt's dye B30 with respect to ET(30) and 4-nitroaniline (NA) are investigated as a function of the solvent composition Nav,z. in co-solvent/water mixtures. Nav,z. is the average molar concentration of the solvent mixture at a given solvent fraction z. The z can be the mole, the volume or the mass fraction. The co-solvents considered were acetonitrile, acetone, tetrahydrofuran, pyridine, piperidine and 2-(diethylamino)-ethanol. Acetone and acetonitrile can be expected to slightly enhance the water structure at low co-solvent concentrations. This interpretation is supported by the analysis of the refractive index as a function of the solvent composition. In general, it can be stated that the structural complexity of the binary solvent mixtures is mainly responsible for the evolution of the absorption energies ET(30) or νmax(NA) as a function of the mixture composition. In particular, the endothermic solvation of NA in co-solvent/water mixtures and its effect on the νmax(NA) is highlighted.

2.
Chemphyschem ; 24(19): e202300430, 2023 Oct 04.
Artigo em Inglês | MEDLINE | ID: mdl-37462088

RESUMO

Changes of the refractive index for homologous series of hydrocarbons are usually plotted versus the density. While there is a clear linear dependence for alkanes and alkenes, the linearity deteriorates for homologous series with functional groups involving heteroatoms. The slope can even become negative, e. g., for carboxylic acids. For gaining a deeper understanding and to establish a more general correlation, we reinvestigate the corresponding theories starting with the Newton-Laplace, Gladstone-Dale and the Lorentz-Lorenz rules. We revisit the concept of molar refractivity pioneered by Landolt and Brühl and show that it is closely connected with a twin of Beer's law. We conclude that the refractive index of homologues series should better be plotted versus the molar concentration of the main UV-chromophore, the C-H bond, which actually causes the refractive index changes. This new approach is not limited to alkanes and alkenes but holds for homologous series with functional groups including heteroatoms.

3.
Chemphyschem ; 24(9): e202200780, 2023 May 02.
Artigo em Inglês | MEDLINE | ID: mdl-36651315

RESUMO

The solvatochromicity of established solvatochromic UV/Vis probes, which appear to be sensitive to the so-called hydrogen bond donor (HBD) property of the solvent, is analysed using the hydroxyl group density of alcoholic solvents DHBD as a physical parameter in comparison to the pKa, the chemical benchmark for acidity. Reichardt's dye B30, Kosowers Z-indicator 1-ethyl-4-(methoxycarbonyl) pyridinium iodide (K), Kamlet-Tafts α, Dragos S parameter, Catalans SA scale, the cis-dicyano-bis (1,10-phenanthroline) iron II complex (Schilt's Ferrocyphen dye, Fe) and Gutmann's acceptor number (AN) have been investigated. The observed dependencies of the empirical polarity parameters as a function of DHBD for several alcoholic solvent families requires a ompletely new physicochemical understanding of these established HBD parameters. Only the AN scale (or Fe) is able to bridge the gap between global polarity and acidity, provided the values are interpreted correctly and applied accordingly.

4.
ChemistryOpen ; 11(10): e202200140, 2022 10.
Artigo em Inglês | MEDLINE | ID: mdl-36284211

RESUMO

The DHBD quantity represents the hydroxyl group density of alcoholic solvents or water. DHBD is purely physically defined by the product of molar concentration of the solvent (N) and the factor Σn=n×f which reflects the number n and position (f-factor) of the alcoholic OH groups per molecule. Whether the hydroxyl group is either primary, secondary or tertiary is taken into account by f. Σn is clearly linearly correlated with the physical density or the refractive index of the alcohol derivative. Relationships of solvent-dependent UV/Vis absorption energies as ET (30) values, 129 Xe NMR shifts and kinetic data of 2-chloro-2-methylpropane solvolysis with DHBD are demonstrated. It can be shown that the ET (30) solvent parameter reflects the global polarity of the hydrogen bond network rather than specific H-bond acidity. Significant correlations of the log k1 rate constants of the solvolysis reaction of 2-chloro-2-methylpropane with DHBD show the physical reasoning of the approach.


Assuntos
Refratometria , Água , Ligação de Hidrogênio , Solventes/química , Fenômenos Químicos
5.
Chemphyschem ; 23(14): e202200100, 2022 07 19.
Artigo em Inglês | MEDLINE | ID: mdl-35579664

RESUMO

The UV/Vis spectra of a hypothetical negative solvatochromic dye in a solvent are theoretically calculated assuming the classical damped harmonic oscillator model and the Lorentz-Lorenz relation. For the simulations, the oscillator strength of the solvent was varied, while for the solute all oscillator parameters were kept constant. As a result, a simple change of the oscillator strength of the solute can explain the redshift and intensity increase of the UV/Vis band of the solute. Simulated results are compared with measured UV/Vis spectroscopic data of 2,6-diphenyl-4-(2,4,6-triphenylpyridinium-1-yl) phenolate B30 (Reichardt's dye) Significant correlations of the absorption energy (1/λmax ) with the molar absorption coefficient ϵ as function of solvent polarity are demonstrated for several derivatives of B30. The approach presented is only applicable to negative solvatochromism. Therefore, while the approach is vital to fully understand solvatochromism, it needs to be complemented by other approaches, e. g., to describe the changes of the chemical interactions based on the nature of the solvent, to explain all its various aspects.


Assuntos
Compostos de Piridínio , Compostos de Piridínio/química , Soluções , Solventes/química , Análise Espectral
6.
Phys Chem Chem Phys ; 23(47): 26750-26760, 2021 Dec 08.
Artigo em Inglês | MEDLINE | ID: mdl-34846390

RESUMO

UV/Vis absorption data of (E)-4-(2-[5-{4,4,5,5-tetramethyl-1,3,2-dioxaborolane-2-yl}thiene-2-yl]vinyl)-2-(dicyano-methylene)-3-cyano-5,5-dimethyl-2,5-dihydrofuran (ThTCF) as a solvatochromic probe is applied to examine the anion coordination strength (e.g. of N(CN)2, BF4, PF6, N(Tf)2, CF3COO) as a function of the cation structure of ionic liquids. Several 1-n-alky-3-methylimidazolium- and tetraalkylammonium CH3-NR3+-based ILs with different n-alkyl chain lengths (R = -C4H9, -C6H11, -C8H17, -C10H21) are considered. UV/Vis absorption data of ThTCF show subtle correlations with hydrogen bond accepting (HBA) ability-related measurands such as Kamlet-Taft ß, Freire's EHB, and Laurence ß1 parameter as a function of anion and cation structure. The different influence of the n-alkyl chain length of imidazolium- and tetraalkylammonium-based ILs on the dipolarity and HBA strength is confirmed by comparison with the 14N isotropic hyperfine coupling constants (Aiso) of a positively (CATI) and negatively charged spin probe (TSKCr) of TEMPO-type [(2,2,6,6-tetramethylpiperidin-1-yl)oxyl] and quantum chemically derived dipoles of the cations. The Aiso values correlate with the absorption energy of ThTCF and EHB, but in different ways depending on the anion or charge of the spin probe. In a final discussion of the ß, EHB, and ß1 scales in relation to ThTCF, the importance of the molar concentration N of ionic liquids for the physical significance of the respective parameters is discussed.

7.
Phys Chem Chem Phys ; 23(2): 1616-1626, 2021 Jan 21.
Artigo em Inglês | MEDLINE | ID: mdl-33410837

RESUMO

The Kamlet-Taft dipolarity/polarizability parameters π* for various ionic liquids were determined using 4-tert-butyl-2-((dicyanomethylene)-5-[4-N,N-diethylamino)-benzylidene]-Δ3-thiazoline and 5-(N,N-dimethylamino)-5'-nitro-2,2'-bithiophene as solvatochromic probes. In contrast to the established π*-probe N,N-diethylnitroaniline, the chromophores presented here show excellent agreement with polarity measurement using the chemical shift of 129Xe. They do not suffer from additional bathochromic UV/vis shifts caused by hydrogen-bonding resulting in too high π*-values for some ionic liquids. In combination with large sets of various ionic liquids, these new chromophores thereby allow for detailed analysis of the physical significance of π* and the comparison to quantum-mechanical methods. We find that π* correlates strongly with the ratio of molar refractivity to molar volume, and thus with the refractive index.

8.
ACS Macro Lett ; 10(3): 389-394, 2021 03 16.
Artigo em Inglês | MEDLINE | ID: mdl-35549062

RESUMO

Water-soluble bis(N-acylpiperidone)s with aldehyde-like reactivity are reported to react rapidly with polyvinylamine at room temperature, providing unprecedented clean reaction products. Unlike most amine/ketone reactions that result in arbitrary mixtures of imines, aminals, hemiaminals, or hydrates, in the present study hemiaminals, aminals, or hemiaminal/aminal mixtures are exclusively found. Detailed NMR spectroscopy of solutions, gels, and solids, aided by model reactions, reveals that the hemiaminal/aminal ratio depends on pH, water content, and cross-linking density. Network formation is fully reversible upon changes in pH, with the resulting moduli from rheology spanning almost 3 orders of magnitude. The self-healing ability of the system is probed by rheology as well, demonstrating maintained material properties of fractured and healed samples. The unusually clean, fast, and reversible chemistry highlights bispiperidones as a class of efficient building blocks with unprecedented possibilities in dynamic covalent chemistry.


Assuntos
Hidrogéis , Polivinil , Hidrogéis/química , Reologia , Água
9.
Phys Chem Chem Phys ; 22(18): 9954-9966, 2020 May 13.
Artigo em Inglês | MEDLINE | ID: mdl-32352138

RESUMO

Reichardt's empirical ET(30) polarity parameter has been established as appropriate polarity scale for ionic liquids. In this study, the relationships of ET(30) of ionic liquids with the empirical Kamlet-Taft polarity parameters α (hydrogen bond donating ability), ß (hydrogen bond accepting ability) and π* (dipolarity/polarizability) as well as Catalán's parameter set SA (solvent acidity), SB (solvent basicity), SP (solvent polarizability) and SdP (solvent dipolarity) are examined by means of multiple square correlation analyses. Several subtasks were carried out to address this main concern. First, the influence of anion structure on ET(30) polarity parameters for various ionic liquids are investigated by use of nine differently substituted pyridinio phenolate betaine dyes of the Reichardt type. It is assumed that halide anions can have an effect on the ET(30) parameter. In the second part, the Kamlet-Taft π* parameters have been independently determined for several protic ionic liquids using 4-tert-butyl-2-(dicyanomethylene)-5-[4-(diethylamino)-benzylidene]-Δ3-thiazoline (Th) and N,N-diethyl-4-nitroaniline (DENA) to show the impact of the hydrogen bond donating ability of the IL on the actual π* values as function of probe. α and SA values have been measured using the dicyano-bis(1,10-phenanthroline) iron(ii) complex (Fe) as HBD probe. Finally, the newly determined Reichardt ET(30), Kamlet-Taft and Catalán parameters of ionic liquids were used in addition to literature data to prove correlations of ET(30) with α and π* as well as of ET(30) with SA and SdP. Linear correlations of SdP with the molar concentration of the ionic liquid are highlighted.

10.
Chemistry ; 26(12): 2635-2652, 2020 Feb 26.
Artigo em Inglês | MEDLINE | ID: mdl-31650632

RESUMO

The synthesis of 1-Fc- (3), 1-Br-6-Fc- (5 a), 2-Br-7-Fc- (7 a), 1,6-Fc2 - (5 b), 2,7-Fc2 -pyrene (7 b), 3,6-Fc2 -9,10-phenanthrenedione (10), and 3,6-Fc2 -9,10-dimethoxyphenanthrene (12; Fc=Fe(η5 -C5 H4 )(η5 -C5 H5 )) is discussed. Of these compounds, 10 and 12 form 1D or 2D coordination polymers in the solid state. (Spectro)Electrochemical studies confirmed reversible Fc/Fc+ redox events between -130 and 160 mV. 1,6- and 2,7-Substitution in 5 a (E°'=-130 mV) and 7 a (E°'=50 mV) influences the redox potentials, whereas the ones of 5 b and 7 b (E°'=20 mV) are independent. Compounds 5 b, 7 b, 10, and 12 show single Fc oxidation processes with redox splittings between 70 and 100 mV. UV/Vis/NIR spectroelectrochemistry confirmed a weak electron transfer between FeII /FeIII in mixed-valent [5 b]+ and [12]+ . DFT calculations showed that 5 b non-covalently interacts with the single-walled carbon nanotube (SWCNT) sidewalls as proven by, for example, disentangling experiments. In addition, CV studies of the as-obtained dispersions confirmed exohedral attachment of 5 b at the SWCNTs.

11.
J Org Chem ; 82(16): 8476-8488, 2017 08 18.
Artigo em Inglês | MEDLINE | ID: mdl-28715212

RESUMO

Second-order rate constants (k2) of the reactions of various barbiturate anions such as the parent barbiturate, 1,3-dimethylbarbiturate, 2-thiobarbiturate, and 1,3-diethyl-2-thiobarbiturate with diarylcarbenium ions and Michael acceptors have been determined in dimethyl sulfoxide solution at 20 °C. The reactivity parameters N and sN of the barbiturate anions were derived from the linear plots of log k2 versus the electrophilicity parameters E of these reference electrophiles, according to the linear-free-energy relationship log k2 (20 °C) = sN (E + N). Several reactions of these nucleophiles with benzylidenemalononitriles and quinone methides proceeded with reversible formation of the new C-C-bond followed by rate-determining proton shift. No evidence for initial attack of the electrophiles at the enolate oxygens of these nucleophiles was found by the kinetic measurements, in line with quantum chemical DFT calculations, which showed that in all cases C-attack is kinetically and thermodynamically preferred over O-attack. The nucleophilic reactivities of barbiturate anions were compared with those of structurally related carbanions, e.g., Meldrum's acid and dimedone anions.

12.
Chempluschem ; 82(12): 1396-1407, 2017 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-31957236

RESUMO

Presented here is a combined computational and experimental study on the thermal initiation process of the twin polymerization. Although thermally initiated twin polymerization offers a versatile scheme for obtaining hybrid organic/inorganic nanocomposite materials, the mechanism for its initiation is very different from the proton-initiated twin polymerization. In this study, the basic mechanism of the early steps of the polymerization process of 4 H,4 H'-2,2'-spirobi[benzo[d][1,3,2]dioxasiline] was investigated by using electronic structure calculations in conjunction with experimental differential scanning calorimetry studies. This way, the influences on the thermally initiated twin polymerization process could be analyzed in detail. The previous mechanistic hypotheses are systematically assessed herein to show that, based on the results, a new hypothesis for an initiation mechanism can be formulated that is in agreement with all experimental observations. These results suggest that, before the formation of the polymer networks, the thermal initiation starts with the formation of low-molecular-weight fragments that react to yield acidic groups. If a sufficient amount of these form, the reaction is ultimately funneled into a mechanism similar to that of proton-initiated twin polymerization.

13.
Chemistry ; 22(16): 5734-48, 2016 Apr 11.
Artigo em Inglês | MEDLINE | ID: mdl-26945529

RESUMO

The specific barbituric acid dyes 1-n-butyl-5-(2,4-dinitro-phenyl) barbituric acid and 1-n-butyl-5-{4-[(1,3-dioxo-1H-inden-(3 H)-ylidene)methyl]phenyl}barbituric acid were used to study complex formation with nucleobase derivatives and related model compounds. The enol form of both compounds shows a strong bathochromic shift of the UV/Vis absorption band compared to the rarely coloured keto form. The keto-enol equilibria of the five studied dyes are strongly dependent on the properties of the environment as shown by solvatochromic studies in ionic liquids and a set of organic solvents. Enol form development of the barbituric acid dyes is also associated with alteration of the hydrogen bonding pattern from the ADA to the DDA type (A=hydrogen bond acceptor site, D=donor site). Receptor-induced altering of ADA towards DDA hydrogen bonding patterns of the chromophores are utilised to study supramolecular complex formation. As complementary receptors 9-ethyladenine, 1-n-butylcytosine, 1-n-butylthymine, 9-ethylguanidine and 2,6-diacetamidopiridine were used. The UV/Vis spectroscopic response of acid-base reaction compared to supramolecular complex formation is evaluated by (1)H NMR titration experiments and X-ray crystal structure analyses. An increased acidity of the barbituric acid derivative promotes genuine salt formation. In contrast, supramolecular complex formation is preferred for the weaker acidic barbituric acid.


Assuntos
Barbitúricos/química , Corantes/química , Indenos/química , Nitrocompostos/química , Cristalografia por Raios X , Ligação de Hidrogênio , Espectroscopia de Ressonância Magnética , Oxirredução , Solventes/química , Raios Ultravioleta
14.
Chemistry ; 22(2): 783-801, 2016 Jan 11.
Artigo em Inglês | MEDLINE | ID: mdl-26660031

RESUMO

Complexes [{Ru(CO)Cl(PiPr3 )2 }2 (µ-2,5-(CH-CH)2 -(c) C4 H2 E] (E=NR; R=C6 H4 -4-NMe2 (10 a), C6 H4 -4-OMe (10 b), C6 H4 -4-Me (10 c), C6 H5 (10 d), C6 H4 -4-CO2 Et (10 e), C6 H4 -4-NO2 (10 f), C6 H3 -3,5-(CF3 )2 (10 g), CH3 (11); E=O (12), S (13)) are discussed. The solid state structures of four alkynes and two complexes are reported. (Spectro)electrochemical studies show a moderate influence of the nature of the heteroatom and the electron-donating or -withdrawing substituents R in 10 a-g on the electrochemical and spectroscopic properties. The CVs display two consecutive one-electron redox events with ΔE°'=350-495 mV. A linear relationship between ΔE°' and the σp Hammett constant for 10 a-f was found. IR, UV/Vis/NIR and EPR studies for 10(+) -13(+) confirm full charge delocalization over the {Ru}CH-CH-heterocycle-CH-CH{Ru} backbone, classifying them as Class III systems according to the Robin and Day classification. DFT-optimized structures of the neutral complexes agree well with the experimental ones and provide insight into the structural consequences of stepwise oxidations.

15.
Chemistry ; 21(49): 17890-6, 2015 Dec 01.
Artigo em Inglês | MEDLINE | ID: mdl-26489784

RESUMO

A series of boronate-π-acceptor compounds containing different types of π bridges (1,4-phenylen or thien-2,5-diyl or furan-2,5-diyl) that link the switchable boronate ester group with the efficient TCF acceptor group (TCF=2-dicyanomethylen-3-cyano-4,5,5-trimethyl-2,5-dihydrofuran) has been synthesized. A TCF chromophore of this type undergoes transition to a donor-π-acceptor compound upon coordination of Lewis bases at the Lewis acidic boron center, which is accompanied by an enhanced intramolecular charge-transfer interaction. The Lewis acid character has been investigated by spectroscopic measurements (UV/Vis, NMR spectroscopies) as well as DFT and ab initio-based calculations. It is shown that the TCF acceptor group and thiophene or furan π-bridges directly bound to the boron atom cooperatively increase the Lewis acidity. UV/Vis titration experiments confirm fluoride binding constants in the range of up to 10(8) M(-1) in CH2 Cl2 . In addition to the strong boron fluoride binding motif, Lewis interactions also occur with weaker Lewis bases, such as pyridine or aliphatic alcohols. The unique combination of chromophoric and Lewis acidic properties is responsible for the intense colorimetric turn-on response detectable after complex formation.

16.
Macromol Rapid Commun ; 36(18): 1623-39, 2015 Sep.
Artigo em Inglês | MEDLINE | ID: mdl-26099470

RESUMO

Twin polymerization is a novel modular approach for the synthesis of hybrid materials. Using this strategy two distinct polymers of either inorganic or organic nature are produced from a single source monomer in a mechanistically coupled process. Twin polymerization is an elegant way for producing nanostructured organic-inorganic hybrid materials of composition and morphology on demand. The main objective of this Review is the explanation of the principle of various twin polymerization processes and their appropriate terminologies. Different types of twin polymerization are classified with respect to the underlying processes as described in individual examples, demonstrating its potential in material synthesis. Prospects of the synthetic methodology of twin polymerization are demonstrated for different molecular structures of twin monomers and the resulting hybrid materials. A comparison with other scenarios for the synthesis of two different polymers within one procedure is included.


Assuntos
Polímeros/química , Nanocompostos/química , Polimerização
17.
Chempluschem ; 80(3): 559-567, 2015 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-31973398

RESUMO

The synthesis of Zr and Hf twin monomers of type [M(2-OCH2 c C4 H3 O)4 (x HOCH2 c C4 H3 O)] (3, M=Zr, x=0; 4, M=Hf, x=1) and M[(2-OCH2 -C6 H4 O)2 (2-HOCH2 -C6 H4 OH)] (5, M=Zr; 6, M=Hf) by reacting M(OR)4 (M=Zr, R=n C3 H7 , 1; M=Hf, R=n C4 H9 , 2) with 2-furylmethanol or 2-hydroxybenzyl alcohol is discussed. Complexes 3-6 were homopolymerized under acidic conditions. Additionally, 5 and 6 were copolymerized with 2,2'-spirobi[4 H-1,3,2-benzodioxasiline] (SBS). Under acidic conditions SBS forms a phenolic resin/SiO2 nanostructured material. The resulting hybrid materials from the homopolymerization of 3-6 and the copolymerized materials from 5 and 6 were characterized by standard solid-state analytics. The inorganic lattice of the MO2 materials from the homopolymerized complexes 3-6 and SiO2 /MO2 from the copolymerization of 5 and 6 with SBS was obtained by air oxidation. The oxide materials were characterized by X-ray powder diffraction (XRPD) and energy-dispersive X-ray analysis, which proved their identity. The inner surface area was determined by N2 adsorption/desorption studies, which revealed surface areas of 100 m2 g-1 for MO2 . The mixed oxides SiO2 /MO2 were additionally investigated by differential scanning calorimetry and variable-temperature XRPD to study the thermal behavior. It was found that crystallization of tetragonal MO2 nanoparticles is characteristic within the SiO2 matrix, but higher sintering temperatures caused crystallization of the SiO2 lattice.

18.
Chemistry ; 20(26): 8040-53, 2014 Jun 23.
Artigo em Inglês | MEDLINE | ID: mdl-24849004

RESUMO

The twin monomer 2,2'-spirobi[4H-1,3,2-benzodioxasiline] (1) can be polymerized to nanostructured SiO2/phenolic-resin composite material by thermally induced twin polymerization. Thermally induced twin polymerization represents a way to produce nanocomposites simply by thermal induction of twin monomers. Besides 1, the thermal reaction of several related salicylic (2-oxybenzylic) silicon molecules has been investigated. The thermal cleavage of the molecules is studied by using several trapping reagents (e.g., vinyl compounds). A significant occurrence of quinone methide adducts indicates that the thermal mechanism proceeds not only by a ring opening at the oxymethylene position, but also with the ortho-quinone methide as a central or alternative intermediate. This is supported by product analyses of thermally initialized reactions of 1 and its substituted analogues as well as by quantum chemical calculations.

19.
Chemistry ; 20(8): 2232-43, 2014 Feb 17.
Artigo em Inglês | MEDLINE | ID: mdl-24515607

RESUMO

The four empirical solvent polarity parameters according to the Catalán scale--solvent acidity (SA), solvent basicity (SB), solvent polarizability (SP), and solvent dipolarity (SdP)--of 64 ionic liquids (ILs) were determined by the solvatochromic method. The SA parameter was determined solely by using [Fe(II)(1,10-phenanthroline)2(CN)2] (Fe), the SB parameter by using the pair of structurally comparable dyes 3-(4-amino-3-methylphenyl)-7-phenylbenzo[1,2-b:4,5-b']difuran-2,6-dione (ABF) and 3-(4-N,N-dimethylaminophenyl)-7-phenylbenzo[1,2-b:4,5-b']-difuran-2,6-dione (DMe-ABF), and the SP and SdP parameters by using the homomorphic pair of 4-tert-butyl-2-(dicyanomethylene)-5-[4-(diethylamino)benzylidene]-Δ(3)-thiazoline (Th) and 2-[4-(N,N-dimethylamino)benzylidene]malononitrile (BMN). The separation of SP and SdP for a set of 64 various ILs was performed for the first time. Correlation analyses of SP with physicochemical data related to ionization potentials of anions of ILs as well as with theoretical data show the correctness of the applied method. The found correlations of the Catalán parameters with each other and with the alkyl-chain length of 1-alkyl-3-methylimidazolium-type ILs gives new information about interactions within ILs. An analytical comparison of the determined Catalán parameters with the established Kamlet-Taft parameters and the Gutmann acceptor and donor numbers is also presented.

20.
ACS Appl Mater Interfaces ; 5(13): 6161-7, 2013 Jul 10.
Artigo em Inglês | MEDLINE | ID: mdl-23755858

RESUMO

Aluminum phosphate was deposited onto bundles of carbon fibers and flat glassy carbon substrates using atomic layer deposition by exposing them to alternating pulses of trimethylaluminum and triethylphosphate vapors. Energy dispersive X-ray spectroscopy (EDXS) and solid state nuclear magnetic resonance (SS-NMR) spectra confirmed that the coating comprises aluminum phosphate (orthophosphate as well as other stoichiometries). Scanning electron microscopic (SEM) images revealed that the coatings are uniform and conformal. After coating, the fibers are still separated from each other like the uncoated fibers. Thermogravimetric analysis (TGA) indicates an improvement of oxidation resistance of the coated fibers compared to uncoated fibers.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...