RESUMO
The synthesis of regioregular poly(3-hexyl)selenophene is reported, and its optical and electrical properties are compared to those of regioregular poly(3-hexyl)thiophene.
Assuntos
Compostos Organosselênicos/química , Polímeros/química , Estrutura Molecular , EspectrofotometriaRESUMO
Organic electronics technology, in which at least the semiconducting component of the integrated circuit is an organic material, offers the potential for fabrication of electronic products by low-cost printing technologies, such as ink jet, gravure offset lithography and flexography. The products will typically be of lower performance than those using the present state of the art single crystal or polysilicon transistors, but comparable to amorphous silicon. A range of prototypes are under development, including rollable electrophoretic displays, active matrix liquid crystal (LC) displays, flexible organic light emitting diode displays, low frequency radio frequency identification tag and other low performance electronics. Organic semiconductors that offer both electrical performance and stability with respect to storage and operation under ambient conditions are required. This work describes the development of reactive mesogen semiconductors, which form large crosslinked LC domains on polymerization within mesophases. These crosslinked domains offer mechanical stability and are inert to solvent exposure in further processing steps. Reactive mesogens containing conjugated aromatic cores, designed to facilitate charge transport and provide good oxidative stability, were prepared and their liquid crystalline properties evaluated. The organization and alignment of the mesogens, both before and after crosslinking, were probed by grazing incidence wide-angle X-ray scattering of thin films. Both time-of-flight and field effect transistor devices were prepared and their electrical characterization reported.
RESUMO
Organic semiconductors that can be fabricated by simple processing techniques and possess excellent electrical performance, are key requirements in the progress of organic electronics. Both high semiconductor charge-carrier mobility, optimized through understanding and control of the semiconductor microstructure, and stability of the semiconductor to ambient electrochemical oxidative processes are required. We report on new semiconducting liquid-crystalline thieno[3,2-b ]thiophene polymers, the enhancement in charge-carrier mobility achieved through highly organized morphology from processing in the mesophase, and the effects of exposure to both ambient and low-humidity air on the performance of transistor devices. Relatively large crystalline domain sizes on the length scale of lithographically accessible channel lengths ( approximately 200 nm) were exhibited in thin films, thus offering the potential for fabrication of single-crystal polymer transistors. Good transistor stability under static storage and operation in a low-humidity air environment was demonstrated, with charge-carrier field-effect mobilities of 0.2-0.6 cm(2) V(-1) s(-1) achieved under nitrogen.
RESUMO
This work describes a new design methodology that allows the preparation of air stable, semiconducting thiophene polymers with high charge carrier mobilities. The incorporation of thieno[2,3-b]thiophene into a polythiophene backbone introduces cross-conjugated double bonds that disfavor full delocalization, leading to high ionization potential in comparison to a fully conjugated polythiophene, with no reduction in charge carrier mobility. The resulting solution processable polymers exhibit charge carrier mobilities up to 0.15 cm2/V s and on/off ratios greater than 105 when measured in air. Transistors exhibit lifetimes of several months in air with no encapsulation necessary.