Laser-induced graphene on cross-linked sodium alginate.

Laser-induced graphene (LIG) possesses desirable properties for numerous applications. However, LIG formation on biocompatible substrates is needed to further augment the integration of LIG-based technologies into nanobiotechnology. Here, LIG formation on cross-linked sodium alginate is reported. The LIG is systematically investigated, providing a comprehensive understanding of the physicochemical characteristics of the material. Raman spectroscopy, scanning electron microscopy with energy-dispersive x-ray analysis, x-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy techniques confirm the successful generation of oxidized graphene on the surface of cross-linked sodium alginate. The influence of laser parameters and the amount of crosslinker incorporated into the alginate substrate is explored, revealing that lower laser speed, higher resolution, and increased CaCl2content leads to LIG with lower electrical resistance. These findings could have significant implications for the fabrication of LIG on alginate with tailored conductive properties, but they could also play a guiding role for LIG formation on other biocompatible substrates.

Optically levitated nanoparticle as a model system for stochastic bistable dynamics.

Nano-mechanical resonators have gained an increasing importance in nanotechnology owing to their contributions to both fundamental and applied science. Yet, their small dimensions and mass raises some challenges as their dynamics gets dominated by nonlinearities that degrade their performance, for instance in sensing applications. Here, we report on the precise control of the nonlinear and stochastic bistable dynamics of a levitated nanoparticle in high vacuum. We demonstrate how it can lead to efficient signal amplification schemes, including stochastic resonance. This work contributes to showing the use of levitated nanoparticles as a model system for stochastic bistable dynamics, with applications to a wide variety of fields.

Plasmon scattering from single subwavelength holes.

We map the complex electric fields associated with the scattering of surface plasmon polaritons by single subwavelength holes of different sizes in thick gold films. We identify and quantify the different modes associated with this event, including a radial surface wave with an angularly isotropic amplitude. This wave is shown to arise from the out-of-plane electric dipole induced in the hole, and we quantify the corresponding polarizability, which is in excellent agreement with electromagnetic theory. Time-resolved measurements reveal a time delay of 38±18 fs between the surface plasmon polariton and the radial wave, which we attribute to the interaction with a broad hole resonance.

Statistical fluctuations of transmission in slow light photonic-crystal waveguides.

We report statistical fluctuations for the transmissions of a series of photonic-crystal waveguides (PhCWs) that are supposedly identical and that only differ because of statistical structural fabrication-induced imperfections. For practical PhCW lengths offering tolerable -3dB attenuation with moderate group indices (n(g) approximately 60), the transmission spectra contains very narrow peaks (Q approximately 20,000) that vary from one waveguide to another. The physical origin of the peaks is explained by calculating the actual electromagnetic-field pattern inside the waveguide. The peaks that are observed in an intermediate regime between the ballistic and localization transports are responsible for a smearing of the local density of states, for a rapid broadening of the probability density function of the transmission, and bring a severe constraint on the effective use of slow light for on-chip optical information processing. The experimental results are quantitatively supported by theoretical results obtained with a coupled-Bloch-mode approach that takes into account multiple scattering and localization effects.

Loss engineered slow light waveguides.

Slow light devices such as photonic crystal waveguides (PhCW) and coupled resonator optical waveguides (CROW) have much promise for optical signal processing applications and a number of successful demonstrations underpinning this promise have already been made. Most of these applications are limited by propagation losses, especially for higher group indices. These losses are caused by technological imperfections ("extrinsic loss") that cause scattering of light from the waveguide mode. The relationship between this loss and the group velocity is complex and until now has not been fully understood. Here, we present a comprehensive explanation of the extrinsic loss mechanisms in PhC waveguides and address some misconceptions surrounding loss and slow light that have arisen in recent years. We develop a theoretical model that accurately describes the loss spectra of PhC waveguides. One of the key insights of the model is that the entire hole contributes coherently to the scattering process, in contrast to previous models that added up the scattering from short sections incoherently. As a result, we have already realised waveguides with significantly lower losses than comparable photonic crystal waveguides as well as achieving propagation losses, in units of loss per unit time (dB/ns) that are even lower than those of state-of-the-art coupled resonator optical waveguides based on silicon photonic wires. The model will enable more advanced designs with further loss reduction within existing technological constraints.

Nanohole chains for directional and localized surface plasmon excitation.

Arrangements of subwavelength sized holes in metal films are often used to launch surface plasmon polaritons (SPPs) onto metal-dielectric interfaces. They are readily fabricated and can also be used to generate a variety of near- and far-field intensity patterns. We use a short chain of equally spaced subwavelength sized holes to launch SPPs onto a gold-air interface in complex patterns of hotspots. With a phase-sensitive near-field microscope, we visualize the electric field of the excited SPPs. We observe self-images of the chain that we attribute to the Talbot effect. Far from the chain we observe the SPP diffraction orders. We find that when the spacing of the holes is of the order of the wavelength, the revivals do not occur on the well-known Talbot distance as derived in the paraxial limit. We present an alternative expression for the Talbot distance that does hold for these small spacings. We study the behavior of both the revivals and the diffraction orders as a function of the number of holes. We find that the Talbot revivals become more pronounced as the number of holes is increased, which is in accordance with numerical calculations. We anticipate that our findings are interesting for multiplexing sensor applications, where control over the local intensity of SPPs is crucial.