RESUMO
Estimating depth from images is a common technique in 3D perception. However, dealing with non-Lambertian materials, e.g., transparent or specular, is still nowadays an open challenge. However, to overcome this challenge with deep stereo matching networks or monocular depth estimation, data sets with non-Lambertian objects are mandatory. Currently, only few real-world data sets are available. This is due to the high effort and time-consuming process of generating these data sets with ground truth. Currently, transparent objects must be prepared, e.g., painted or powdered, or an opaque twin of the non-Lambertian object is needed. This makes data acquisition very time consuming and elaborate. We present a new measurement principle for how to generate a real data set of transparent and specular surfaces without object preparation techniques, which greatly reduces the effort and time required for data collection. For this purpose, we use a thermal 3D sensor as a reference system, which allows the 3D detection of transparent and reflective surfaces without object preparation. In addition, we publish the first-ever real stereo data set, called TranSpec3D, where ground truth disparities without object preparation were generated using this measurement principle. The data set contains 110 objects and consists of 148 scenes, each taken in different lighting environments, which increases the size of the data set and creates different reflections on the surface. We also show the advantages and disadvantages of our measurement principle and data set compared to the Booster data set (generated with object preparation), as well as the current limitations of our novel method.
RESUMO
For three-dimensional (3D) measurement of object surface and shape by pattern projection systems, we used a hybrid projection system, i.e., a combination of a projection lens and a transmissive freeform to generate an aperiodic sinusoidal fringe pattern. Such a freeform effects a light redistribution, thus leading to an effective and low-loss pattern projection, as it increases the total transmission intensity of the system and has less power dissipation than classical projection systems. In this paper, we present the conception and realization of the measurement setup of a transmissive fringe projection system. We compare the characteristics of the generated intensity distribution with the classical system based on GOBO (GOes Before Optics) projection and show measurement results of different surface shapes, recorded with the new system.
RESUMO
Close-range 3D sensors based on the structured light principle have a constrained measuring range due to their depth of field (DOF). Focus stacking is a method to extend the DOF. The additional time to change the focus is a drawback in high-speed measurements. In our research, the method of chromatic focus stacking was applied to a high-speed 3D sensor with 180 fps frame rate. The extended DOF was evaluated by the distance-dependent 3D resolution derived from the 3D-MTF of a tilted edge. The conventional DOF of 14 mm was extended to 21 mm by stacking two foci at 455 and 520 nm wavelength. The 3D sensor allowed shape measurements with extended DOF within 44 ms.
RESUMO
Three-dimensional (3D) shape measurement systems based on diffuse reflection of projected structured light do not deliver reliable data when measuring glossy, transparent, absorbent, or translucent objects. In recent years, we have developed a method based on stereo recording with infrared cameras and projection of areal aperiodic sinusoidal thermal patterns to detect such objects. However, the measurements took longer than 10 s, up to minutes; moreover, the measurement accuracy was improvable. Now, we have succeeded in both drastically reducing measurement time and significantly increasing measurement quality. This finally provides a technique for reliably measuring transparent objects, e.g., in series production. We demonstrate measurement examples achieved within 1 s and with 3D standard deviations less than 10 µm.