Electronic, Structural, and Mechanical Properties of SiO_{2} Glass at High Pressure Inferred from its Refractive Index.

We report the first direct measurements of the refractive index of silica glass up to 145 GPa that allowed quantifying its density, bulk modulus, Lorenz-Lorentz polarizability, and band gap. These properties show two major anomalies at ∼10 and ∼40 GPa. The anomaly at ∼10 GPa signals the onset of the increase in Si coordination, and the anomaly at ∼40 GPa corresponds to a nearly complete vanishing of fourfold Si. More generally, we show that the compressibility and density of noncrystalline solids can be accurately measured in simple optical experiments up to at least 110 GPa.

X-ray Free Electron Laser-Induced Synthesis of ε-Iron Nitride at High Pressures.

The ultrafast synthesis of ε-Fe3N1+x in a diamond-anvil cell (DAC) from Fe and N2 under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by in situ transformation of α- to γ-iron. Ultimately, the Fe and N2 reacted uniformly throughout the beam path to form Fe3N1.33, as deduced from its established equation of state (EOS). We thus demonstrate that the activation energy provided by intense X-ray exposures in an XFEL can be coupled with the source time structure to enable exploration of the time-dependence of reactions under high-pressure conditions.

Effects of temperature and pressure on the optical and vibrational properties of thermoelectric SnSe.

We have conducted a comprehensive investigation of the optical and vibrational properties of the binary semiconductor SnSe as a function of temperature and pressure by means of experimental and ab initio probes. Our high-temperature investigations at ambient pressure have successfully reproduced the progressive enhancement of the free carrier concentration upon approaching the Pnma → Bbmm transition, whereas the pressure-induced Pnma → Bbmm transformation at ambient temperature, accompanied by an electronic semiconductor → semi-metal transition, has been identified for bulk SnSe close to 10 GPa. Modeling of the Raman-active vibrations revealed that three-phonon anharmonic processes dominate the temperature-induced mode frequency evolution. In addition, SnSe was found to exhibit a pressure-induced enhancement of the Born effective charge. Such behavior is quite unique and cannot be rationalized within the proposed effective charge trends of binary materials under pressure.

Single crystal elasticity of natural topaz at high-temperatures.

Topaz is an aluminosilicate mineral phase stable in the hydrothermally altered pegmatitic rocks and also in subducted sedimentary lithologies. In nature, topaz often exhibits solid solution between fluorine and hydrous end members. We investigated elasticity of naturally occurring single crystal topaz (Al2SiO4F1.42(OH)0.58) using Resonant Ultrasound Spectroscopy. We also explored the temperature dependence of the full elastic constant tensor. We find that among the various minerals stable in the Al2O3-SiO2-H2O ternary system, topaz exhibits moderate elastic anisotropy. As a function of temperature, the sound velocity of topaz decreases with [Formula: see text] and [Formula: see text] being -3.10 and -2.30 × 10-4 km/s/K. The elasticity and sound velocity of topaz also vary as a function of OH and F content. The effect of composition ([Formula: see text]) on the velocity is equally important as that of the effect of temperature. We also note that the Debye temperature ([Formula: see text]) of topaz at room temperature condition is 910 K and decreases at higher temperature. The Debye temperature shows positive correlation with density of the mineral phases in the Al2O3-SiO2-H2O ternary system.

Source and nature of inhaled atmospheric dust from trace element analyses of human bronchial fluids.

Rapid volcanic eruptions quickly ejecting large amounts of dust provoke the accumulation of heavy metals in people living in surrounding areas. Analyses of bronchoalveolar lavage samples (BAL) collected from people exposed to the paroxysmal 2001 Etna eruption revealed a strong enrichment of many toxic heavy metals. Comparing the BAL to the dust composition of southeastern Sicily, we found that only V, Cr, Mn, Fe, Co, and U enrichment could be related to the volcanic event, whereas Ni, Cu, Cd, and Pb contents come from the dissolution of particles of anthropogenic origin. Furthermore, the nature of these inhaled anthropogenic particles was revealed by anomalous La and partially Ce concentrations in BAL that were consistent with a mixture of road dust and petroleum refinery emissions. Our results indicate that trace element distribution in BAL is a suitable tracer of human exposure to different sources of inhaled atmospheric particulates, allowing investigations into the origin of source materials inhaled by people subjected to atmospheric fallout.

Elastic shear anisotropy of ferropericlase in Earth's lower mantle.

Seismic shear anisotropy in the lowermost mantle most likely results from elastic shear anisotropy and lattice preferred orientation of its constituent minerals, including perovskite, post-perovskite, and ferropericlase. Measurements of the elastic shear anisotropy of single-crystal (Mg0.9Fe0.1)O up to 69 gigapascals (GPa) show that it increased considerably across the pressure-induced spin transition of iron between 40 and 60 GPa. Increasing iron content further enhances the anisotropy. This leads to at least 50% stronger elastic shear anisotropy of (Mg,Fe)O in the lowermost mantle compared to MgO, which is typically used in geodynamic modeling. Our results imply that ferropericlase is the dominant cause of seismic shear anisotropy in the lower mantle.

Deformation of (Mg,Fe)SiO3 post-perovskite and D'' anisotropy.

Polycrystalline (Mg(0.9),Fe(0.1))SiO3 post-perovskite was plastically deformed in the diamond anvil cell between 145 and 157 gigapascals. The lattice-preferred orientations obtained in the sample suggest that slip on planes near (100) and (110) dominate plastic deformation under these conditions. Assuming similar behavior at lower mantle conditions, we simulated plastic strains and the contribution of post-perovskite to anisotropy in the D'' region at the Earth core-mantle boundary using numerical convection and viscoplastic polycrystal plasticity models. We find a significant depth dependence of the anisotropy that only develops near and beyond the turning point of a downwelling slab. Our calculated anisotropies are strongly dependent on the choice of elastic moduli and remain hard to reconcile with seismic observations.

Plastic deformation of MgGeO3 post-perovskite at lower mantle pressures.

Polycrystalline MgGeO3 post-perovskite was plastically deformed in the diamond anvil cell between 104 and 130 gigapascals confining pressure and ambient temperature. In contrast with phenomenological considerations suggesting (010) as a slip plane, lattice planes near (100) became aligned perpendicular to the compression direction, suggesting that slip on (100) or (110) dominated plastic deformation. With the assumption that silicate post-perovskite behaves similarly at lower mantle conditions, a numerical model of seismic anisotropy in the D'' region implies a maximum contribution of post-perovskite to shear wave splitting of 3.7% with an oblique polarization.