Correlation of rheology and oral tribology with sensory perception of commercial hazelnut and cocoa-based spreads.

This study examined the effects of spread formulation and the structural/lubricant properties of six different commercial hazelnut and cocoa spreads on sensory perception. Rheology, tribology, and quantitative descriptive analysis (QDA) was assessed by also evaluating the correlation coefficients between the quality descriptor and the rheological and textural parameters. The viscosity was evaluated at different temperatures to better simulate conditions before and after ingestion. Tribological analysis was executed at 37°C to mimic the human oral cavity. The effect of saliva presence and the number of runs on tribological behaviors was investigated. Moreover, textural, calorimetric, and particle size distribution measurements were performed to reinforce the correlation between structural/thermal parameters (e.g., firmness, stickiness, sugar melting point) and sensory aspects. "Visual viscosity," defined as a sensory attribute evaluated prior to consumption, negatively correlated with apparent viscosity measured at 20°C and 10 s-1, whereas "body," defined during oral processing and related to creaminess, positively correlated with apparent viscosity measured at 37°C and 50 s-1. These attributes were mainly influenced by particulate microstructure and solid volume fraction within the formulation. Textural stickiness positively correlated with sensory "adhesiveness" and was related to fat composition and milk powder addition, while "sweetness" was related to sucrose content and sugar melting enthalpy. Tribological data provided meaningful information related to particle-derived attributes, as well as after-coating perception (fattiness/oiliness), thus better predicting food evolution during oral consumption.

Ready-to-Use Supplementary-Food Biscuit Production with Low-Cost Ingredients for Malnourished Children in Sub-Saharan Africa.

In Africa, the number of children under 5 years old who suffer from stunting and wasting are, respectively, 61.4 and 12.1 million, and to manage situations like these, emergency food products like RUTF and RUSF (ready-to-use therapeutic/supplementary food) are very useful. The aim of this study was to develop an RUSF biscuit using the low-cost food resources usually present in Sub-Saharan Africa (Burundi and the DRCongo in our case study); we conducted chemical characterization, nutritional evaluation, and a stability trial simulating the usual storage conditions in a rural context to demonstrate that RUSF can be functional also using low-cost ingredients and a simple method of production. The obtained recipes showed good potential in supplying protein integration-17.81% (BUR) and 16.77% (CON) (% as food) were the protein contents-and the protein digestibility values were very high (BUR: 91.72%; CON: 92.01%). Moreover, 30% of the daily requirement was achieved with less than 50 g of both recipes in all the considered ages. Finally, a good shelf-life was demonstrated during the 35-day testing period at 30 °C, considering moisture, texture, and lipid oxidation evolution. Recipes like these, with appropriate changes, could be very useful in all contexts where child malnutrition is a serious problem.

Ozone-activated lignocellulose films blended with chitosan for edible film production.

This work focuses on the influence of ozone pretreatment on the fractionation and solubilization of sugarcane bagasse and soda bagasse pulp fibers in sodium hydroxide/urea solution, as well as the application of regenerated cellulose for producing edible films. The methodology involved pretreating lignocelluloses with ozone for 20 to 120 min before dissolving in sodium hydroxide/urea solution. The influence of the pretreatment conditions on cellulose dissolution yield was investigated. Regenerated cellulose films were then formed, with and without the addition of 2 % chitosan. Mechanical, physical, structural, thermal, and antimicrobial attributes were determined as a function of ozonation conditions of raw materials and chitosan content. The findings exhibited positive effects of short ozonation on enhancing mechanical strength, cohesion, and hydrophobicity. The prolonged ozonation of 120 min demonstrated optimal improvements in continuity, swelling, and antibacterial resistance of obtained films. Incorporating chitosan enhanced tensile performance, stiffness, and vapor barriers but increased moisture absorption. Tailoring the activation of biomass through ozone pretreatment and chitosan addition resulted in renewable films with adjustable properties to meet diverse packaging requirements, particularly for fruit protective coatings, ensuring the preservation of post-harvest quality.

Development of Coated PLA Films Containing a Commercial Olive Leaf Extract for the Food Packaging Sector.

A commercial olive leaf extract (OL), effective against Salmonella enterica, Escherichia coli, Listeria monocytogenes, and Staphylococcus aureus, was added to three different coating formulations (methylcellulose, MC; chitosan, CT; and alginate, ALG) to produce active polylactic acid (PLA) coated films. Evaluation of these coated PLA films revealed significant inhibition of S. aureus growth, particularly with the MC and CT formulations exhibiting the highest inhibition rates (99.7%). The coated films were then tested for food contact compatibility with three food simulants (A: 10% ethanol; B: 3% acetic acid; D2: olive oil), selected to assess their suitability for pre-cut hams and ready-to-eat vegetables in relation to overall migration. However, coated films with active functions exhibited migration values in simulants A and B above legal limits, while promising results were obtained for simulant D2, highlighting the need to deeply investigate these coatings' impact on a real food system. Untargeted metabolomics revealed that the type of coating influenced the selective release of certain phenolic classes based on the food simulant tested. The Oxitest analysis of simulant D2 demonstrated that the MC and ALG-coated PLA films slightly slowed down the oxidation of this food simulant, which is an edible vegetable oil.

A Potentially Ecosustainable Hazelnut/Carob-Based Spread.

Commercial cocoa and hazelnut-based sweet spreads typically present a poor nutribiochemical level due to their ingredients and recipes, while nowadays, there is the need of developing sustainable food products addressing both an improved nutritional and environmental profile. The aim of this work was then to develop an innovative hazelnut/carob-based spread with potential high sustainability and nutritional profile, including the exploitation of grape-processing residues (grape skin flour and grapeseed oil) and carob pulp as cocoa surrogate. Rheological (rotational/oscillatory), oxidative, and thermal features of the spread were assessed and compared with two commercial nut-cocoa-based products. Tribology was used to mimic and evaluate the spreads' behavior during oral consumption, and sensory profile (by quantitative descriptive analysis) was also assessed. All products exhibited a pseudoplastic behavior, with the elastic component prevailing over the viscous one. The innovative product showed the highest lubricity from both rheological and sensory analysis, thus well correlating to the obtained lowest viscosity and friction factor trends. Grapeseed oil provided a better nutritional profile, but the largest amount of unsaturated fatty acids promoted oxidation, despite the higher total phenolic content and antioxidant capacity coming from the use of carob and grape skin powders. The sensory perception investigation revealed a characteristic mouthfeel/flavor for the new spread identified having a more fluid consistency and a bitter/sour taste, together with a greater stickiness and a poorer smoothness due to a higher fiber content and solid fat absence.

Effect of different fibre addition on cookie dough and texture.

Different commercial fibres from bamboo (BAM), cocoa (COC), psyllium (PSY), chokeberry (ARO) and citrus (CIT) were characterized for technological (oil- and water-holding capacity, solubility and bulk density) and physical (moisture, colour and particle size) features and added to a cookie recipe. The doughs were prepared using sunflower oil and white wheat flour was substituted with 5% (w/w) of the selected fibre ingredient. The attributes of the resulting doughs (colour, pH, water activity and rheological tests) and cookies (colour, water activity, moisture content, texture analysis and spread ratio) were compared to control doughs and to cookies made with refined flour and whole flour formulation. The selected fibres consistently impacted dough rheology and, consequently on, the spread ratio and the texture of the cookies. While the viscoelastic behaviour of the control dough made with refined flour was maintained in all sample doughs, adding fibre decreased loss factor (tan δ), except for ARO-added dough. Substitution of wheat flour with fibre decreased the spread ratio except for the PSY addition. The lowest spread ratio values were observed for CIT-added cookie, which were similar to whole flour cookies. The addition of phenolic-rich fibres positively affected the in vitro antioxidant activity of the final products.

The Chemical Variability, Nutraceutical Value, and Food-Industry and Cosmetic Applications of Citrus Plants: A Critical Review.

Citrus fruits occupy an important position in the context of the fruit trade, considering that both fresh fruits and processed products are produced on a large scale. Citrus fruits are recognized as an essential component of the human diet, thanks to their high content of beneficial nutrients such as vitamins, minerals, terpenes, flavonoids, coumarins and dietary fibers. Among these, a wide range of positive biological activities are attributed to terpenes and flavonoids derivatives. In this review, a list of bibliographic reports (from 2015 onwards) on the phytochemical composition, beneficial effects and potential applications of citrus fruits and their by-products is systematically summarized. In detail, information regarding the nutraceutical and medicinal value closely linked to the presence of numerous bioactive metabolites and their growing use in the food industry and food packaging, also considering any technological strategies such as encapsulation to guarantee their stability over time, were evaluated. In addition, since citrus fruit, as well as its by-products, are interesting alternatives for the reformulation of natural cosmetic products, the sector of the cosmetic industry is also explored. More in-depth knowledge of the latest information in this field will contribute to future conscious use of citrus fruits.

Characterization of Durum-Wheat Pasta Containing Resistant Starch from Debranched Waxy Rice Starch.

Durum wheat spaghetti samples prepared with increasing levels of resistant starch (RS) from debranched waxy rice starch (DWRS; i.e., 0, 5, 10, 15 g/100 g w/w) were analyzed for chemical composition, quality and sensory parameters and in vitro starch digestion. All the DWRS-containing spaghetti was "high in fibre", the dietary fiber content being > 6 g/100 g. In addition, spaghetti with the highest level of DWRS showed the highest RS content (p < 0.05), being 11.4 g/100 g dry matter. The starch hydrolysis index decreased (p < 0.05) as the level of DWRS increased, with a reduction of >20% comparing the 15-DWRS pasta to the control. DWRS had a negative impact on quality parameters, especially at higher DWRS levels. The use of DWRS shortened the optimal cooking time and impacted the samples' cooking loss, firmness, and stickiness. In addition, sensory analysis revealed differences among samples. However, irrespective of the level of DWRS in the recipe, the score for all attributes was > 5, which is considered the limit of acceptability. Substituting part of the semolina flour with DWRS increased the level of RS and the overall nutritional profile and affected the quality of semolina pasta, mainly at higher levels in the recipe.

Do biodegradable food packaging films from agro-food waste pay off? A cost-benefit analysis in the context of Europe.

Bio-based polymers are increasingly attracting attention as a solution to reducing the consumption of non-renewable resources and curbing the accumulation of fossil-based plastic waste. In this study, we analyze the economics of a new packaging film based on a polylactic acid-polyhydroxybutyrate blend (PLA-PHB), with PHB obtained from agro-industrial residues (potato peels). We model various sizes of biorefineries using the new biotechnology in Europe. For a four-year payback period, which is generally accepted in the industry, the calculated minimum product selling price ranges from 9.7 euros per kilogram to 37.2 euros per kilogram, depending, among other factors, on the production capacity of the biorefinery. We have incorporated the uncertainty over the model parameters in a Monte Carlo simulation and investigated the relative impact of individual factors on the minimum product selling price. Overall, the results indicate that the bio-based feedstock availability is the most influential factor on the profitability of the new biotechnology.

Interaction between Fish Skin Gelatin and Pea Protein at Air-Water Interface after Ultrasound Treatment.

The interaction between fish skin gelatin (FG) and pea protein isolate (PPI) was investigated at the air-water interface (A-W) before and after a high intensity (275 W, 5 min) ultrasound treatment (US). We analyzed the properties of the single protein suspensions as well as an equal ratio of FG:PPI (MIX), in terms of ζ-potential, particle size, molecular weight, bulk viscosity and interfacial tension. The foaming properties were then evaluated by visual analysis and by Turbiscan Tower. Confocal laser scanning microscopy (CLSM) was employed to explore the role of the proteins on the microstructure of foams. The results showed that the ultrasound treatment slightly influenced physicochemical properties of the proteins, while in general, did not significantly affect their behavior both in bulk and at the air-water interface. In particular, PPI aggregate size was reduced (-48 nm) while their negative charges were increased (-1 mV) after the treatment. However, when the proteins were combined, higher molecular weight of aggregates, higher foam stability values (+14%) and lower interfacial tension (IFT) values (47.2 ± 0.2 mN/m) were obtained, leading us to assume that a weak interaction was developed between them.

Impact of Enzymatic Hydrolysis and Heat Inactivation on the Physicochemical Properties of Milk Protein Hydrolysates.

This study determined the physicochemical properties (apparent viscosity (ηapp), turbidity (A550nm), particle size and molecular mass distribution) of hydrolysates generated from whey protein concentrate (WPC), milk protein concentrate (MPC) and sodium caseinate (NaCN), following incubation with Debitrase HYW20™ and Prolyve™ at 50 °C, pH 7.0 for 1 and 4 h, before and after heat inactivation (80 °C for 10 min). The degree of hydrolysis (DH) increased with incubation time, giving values of 6.56%, 8.17% and 9.48%, following 1 h hydrolysis of WPC, MPC and NaCN with Debitrase HYW20™, and 12.04%, 15.74% and 17.78%, respectively, following 4 h incubation. These DHs were significantly higher compared to those obtained following 4 h incubation with Prolyve™. Hydrolysis with Debitrase HYW20™ gave >40% of peptides with molecular masses < 1 kDa for all substrates, which was higher than the value obtained following hydrolysis with Prolyve™. The effect of hydrolysis on the physicochemical properties was substrate dependent, since ηapp decreased in WPC and NaCN hydrolysates, particle size decreased for all the substrates, with aggregate formation for MPC, and turbidity decreased in WPC and MPC hydrolysates, while it increased in NaCN hydrolysates. The physical properties of the hydrolysates were influenced by the enzyme thermal inactivation step in a DH-dependent manner, with no significant effect on turbidity and viscosity for hydrolysates at higher DHs.

Rheological and tribological characterization of different commercial hazelnut-based spreads.

Five commercial hazelnut/cocoa spreads with different compositions were tested by rheology/tribology. The impact of each formulation on the structural/lubricant performances was investigated. Rotational/oscillatory rheology was chosen to assess material behavior during flow. Viscosity variation as a function of temperature and chamber geometry was evaluated. Oscillatory mode tests were carried out to obtain information on product viscoelasticity. Tribological analysis was performed at different temperatures aiming at simulating the chewing/swallowing process. All samples were categorized as pseudo-plastic and viscoelastic materials, with the elastic component prevailing over the viscous one. Major differences were detected in terms of consistency index, depending on the total lipid content. Temperature increase enhanced spread fluidity with a decreasing viscosity according to the Arrhenius model (R2 > 0.942) and greater values of activation energy reflecting higher sensitivity to microstructural changes. An inverse relationship between Casson viscosity ηc and sugar/fat ratio highlighted additional correlations between structural parameters and spread formulation. Tribological measurements at 25°C highlighted that, at the initial eating stage, the friction factor (0.112-0.262 at sliding velocity of 8 × 10-6  m/s) was strongly affected by either the amounts of solid fat or hazelnut percentage. Tribological data corroborated the theory for which tribology and rheology cover different domains.

Chemical composition and bioactivity of oilseed cake extracts obtained by subcritical and modified subcritical water.

Recovery of bioactive compounds from biowaste is gaining more and more interest in circular economy models. The oilseed cakes are usually insufficiently exploited by most technologies since they represent valuable matrices abundant in proteins, minerals, and phytochemicals, but their use is mostly limited to feed ingredients, fertilizers or biofuel production. This study was thus focused on the exploration of new valorization pathways of oilseed cakes by subcritical water, representing a safe and economic alternative in the creation of value chains. Pumpkin, hemp, and flax seed cakes were treated with subcritical water in nitrogen and carbon-dioxide atmospheres, as well as in nitrogen atmosphere with the addition of acid catalyst. The degradation of carbohydrate fraction was studied by quantifying sugars and sugar degradation products in the obtained extracts. The extracts obtained under different conditions were further compared chemically with respect to total phenols and flavonoids, as well as to the content of individual phenolic compounds. Furthermore, the effects of subcritical water treatment conditions on antioxidant, antiradical and cytotoxic properties of thus obtained extracts were defined and discussed.

Effect of Dietary Fiber and Thermal Conditions on Rice Bran Wax-Based Structured Edible Oils.

In this work, extra-virgin olive oil (EVO)- and sunflower oil (SFO)-based oleogels were structured using rice bran wax (RBW) at 10% by weight (w/w). Bamboo fiber milled with 40 (BF40), 90 (BF90) and 150 (BF150) µm of average size was added as a structuring agent. The effect of fiber addition and cooling temperature (0, 4, and 25 °C) on thermal and structural parameters of achieved gels was assessed by rheological (both in rotational and oscillatory mode), texture, and differential scanning calorimetry tests. Oleogelation modified the rheological behavior of EVO and SFO, thus shifting from a Newtonian trend typical of oils to a pseudoplastic non-Newtonian behavior in gels. Moreover, oleogels behaved as solid-like systems with G' > G″, regardless of the applied condition. All samples exhibit a thermal-reversible behavior, even though the presence of hysteresis suggests a partial reduction in structural properties under stress. Decreasing in cooling temperature negatively contributed to network formation, despite being partially recovered by low-granulometry fiber addition. The latter dramatically improved either textural, rheological, or stability parameters of gels, as compared with only edible oil-based systems. Finally, wax/gel compatibility affected the crystallization enthalpy and final product stability (gel strength) due to different gelator-gelator and gelator-solvent interactions.

Functional Nanocomposite Films of Poly(Lactic Acid) with Well-Dispersed Chitin Nanocrystals Achieved Using a Dispersing Agent and Liquid-Assisted Extrusion Process.

The development of bio-based nanocomposites is of high scientific and industrial interest, since they offer excellent advantages in creating functional materials. However, dispersion and distribution of the nanomaterials inside the polymer matrix is a key challenge to achieve high-performance functional nanocomposites. In this context, for better dispersion, biobased triethyl citrate (TEC) as a dispersing agent in a liquid-assisted extrusion process was used to prepare the nanocomposites of poly (lactic acid) (PLA) and chitin nanocrystals (ChNCs). The aim was to identify the effect of the TEC content on the dispersion of ChNCs in the PLA matrix and the manufacturing of a functional nanocomposite. The nanocomposite film's optical properties; microstructure; migration of the additive and nanocomposites' thermal, mechanical and rheological properties, all influenced by the ChNC dispersion, were studied. The microscopy study confirmed that the dispersion of the ChNCs was improved with the increasing TEC content, and the best dispersion was found in the nanocomposite prepared with 15 wt% TEC. Additionally, the nanocomposite with the highest TEC content (15 wt%) resembled the mechanical properties of commonly used polymers like polyethylene and polypropylene. The addition of ChNCs in PLA-TEC15 enhanced the melt viscosity, as well as melt strength, of the polymer and demonstrated antibacterial activity.

Potential Application of Resistant Starch Sorghum in Gluten-Free Pasta: Nutritional, Structural and Sensory Evaluations.

Gluten-free (GF) pasta samples containing rice flour replaced with 0, 5, 10, 15 g/100 g (w/w) of a resistant starch ingredient from annealed sorghum starch (annRS) were formulated. The highest total dietary fiber and RS contents (p < 0.05) were measured in uncooked pasta with 15 g/100 g of annRS addition (15-annRS). After cooking, the 15-annRS pasta was characterized by an RS content of 5.8 g/100 g dry matter, confirming the thermal resistance of annRS. The use of annRS positively influenced the optimal cooking time, the cooking loss, the firmness, and the stickiness of the cooked samples, with not remarkably change in color after cooking. The starch hydrolysis index values decreased as the level of annRS increased. Despite a significant decrease in the overall sensory with increasing levels of annRS, all samples were characterized by a value > 5, which is considered the limit of acceptability. The use of annRS in GF pasta up to 15 g/100 g can contribute to creating GF products with high total dietary fiber content, slowly digestible starch properties, and without drastically compromising the sensory attributes.

Effects of the intake of craft or industrial beer on serum homocysteine.

Beer is a source of folate, vitamin B6 and B12, molecules involved in the pathways of homocysteine (HCY), a risk factor for cardiovascular disease. This research evaluated if a consumption of craft or industrial beer could reduce serum HCY. In a randomised cross-over study, 12 men (28.7 ± 6.0 years) and 12 women (29.4 ± 7.5 years), healthy, omnivorous, with normal body mass index, non-smoking and not taking oral supplements or contraceptives, followed a free-living diet and received, daily, for 3 weeks, 330 ml of industrial (4.5% of alcohol) or craft beer (9% of alcohol). Anthropometric measures and blood samples were taken at the beginning and at the end of each period. The consumption of industrial beer reduced (p < 0.05) HCY (7.35 vs. 6.50 µmol/L) and increased folic acid (3.46 vs. 3.94 ng/mL). Craft beer increased gamma-gluamyl transpeptidase (GGT) (16.6 vs. 18.6 U/L) and reduced vitamin B6 (20.9 vs. 16.9 ng/mL).

Citrus Peel Extracts for Industrial-Scale Production of Bio-Based Active Food Packaging.

The thermal stability of four different commercial citrus peel extracts was tested and improved by an encapsulation process with ß-cyclodextrins in a spray-dryer. All extracts after the encapsulation process maintained a good antioxidant capacity, with an apparent loss in total phenolic compounds of around 20-25%. In addition, all samples showed good antimicrobial activity (MIC 5-0.625 mg/mL) against Staphylococcus aureus, which was maintained after the encapsulation process (MIC 5-1.25 mg/mL). Based on the antioxidant and antimicrobial activity results, the best-encapsulated citrus extract was selected for incorporation into a polylactic acid/polyhydroxy butyrate (PLA/PHB) film. The latter was then produced on an industrial scale by cast extrusion and was found to be suitable for food contact as it showed overall migration values in different food simulants lower than the legislative limit of 10 mg of non-volatile substances per 1 dm2 of surface area. The UHPLC-HRMS analysis, performed to evaluate the migration of the active compounds, revealed about 13.41% release in food simulant A and 11.02% in food simulant B. Antimicrobial analysis conducted directly on the film showed a growth inhibition activity towards Escherichia coli and Staphylococcus aureus equal to 30 and 60%, respectively.

Genome-Assisted Characterization of Lactobacillus fermentum, Weissella cibaria, and Weissella confusa Strains Isolated from Sorghum as Starters for Sourdough Fermentation.

Sourdough fermentation of bakery products is a well-established and widespread technique to confer an added value to the resulting food. In recent decades, gluten-free raw materials have gained more attention due to the diffusion of food disorders such as coeliac disease, but, at the same time, they present difficult manipulation and scarce technological properties because of the absence of gluten. For this reason, the present work was aimed at selecting starter cultures for sourdough application that are isolated from fermentation of sorghum flour. Three isolates of Lactobacillus fermentum, Weissella cibaria, and Weissella confusa were selected for the following properties: exopolysaccharide synthesis, acidification, CO2 production, and amylase activity. The investigated phenotypic characteristics were confirmed by genomic analyses, which also highlighted other potentially beneficial features for use in bakery products employment. These strains, together with bakery yeast, were used for bread preparation using sorghum and wheat flour and after 24 h of fermentation the resulting dough was analyzed to assess the improvement of its characteristics. The presence of lactic acid bacteria (LAB) had a great impact on the final dough, and the best preparation, from a rheological point of view, resulted in one made of sorghum and wheat flour with added LAB and bakery yeast, whose resulting characteristics were similar to all wheat flour doughs. The results of this study suggest a potential application of the selected starters in sorghum composite bread and should be validated with data from large-scale pilot tests conducted in industrial bakeries.

Investigating patterns of millennials' interest in gluten-free beer in Poland: A question of beer price and alcohol content.

The quality perception of gluten-free beer was explored using conjoint analysis with a panel of Polish millennials (n = 200; aged 20 to 35), who were given 64 gluten-free beer concepts to evaluate and score on a 9-point scale of interest (1 = not interested at all; 9 = extremely interested). The constituent factors of the beer concepts were alcohol content, color, type of malt, price, drinking location and occasion, bottle size, label claims, type of farming, type of brewer, and bottle closure. Consumers judged price (38.4%) and alcohol (28.8%) five times more important than the other factors. Bottle size (5.3%), claims (4.8%), type of brewer (4.8%), malt type (4.6%), bottle closure (4.0%), beer color (3.6%), drinking location (2.3%), drinking occasion (2.0%), and type of farming (1.3%) were considered of little importance. The interest of Polish Millennials in gluten-free beer resulted moderate and not linked to medical needs. Males were more interested in gluten-free beers and gave more importance to alcohol content and less importance to price, compared to females. However, for both genders, interest and price were inversely correlated, while interest and alcohol content were directly correlated. PRACTICAL APPLICATION: The identification of the product factors that are preferred by consumers is paramount to translate consumers' needs and expectations into a beer designed to produce the best possible product in a relatively short period. Including information directly obtained from consumers before final design decisions are taken on the final beer output, helps ensuring development directions are on target and constitutes a cost-competitive approach to product development.