The efficacy of premixed bioceramic sealers versus standard sealers on root canal treatment outcome, extrusion rate and post-obturation pain: A systematic review and meta-analysis.

BACKGROUND: Limited evidence is available regarding the superior clinical properties of bioceramic sealers comparted with traditional standard sealers. OBJECTIVES: This review aimed to answer the following research questions: 'In healthy patients requiring a root canal treatment (P), what is the efficacy of premixed bioceramic sealers (I) compared with traditional root canal epoxy resin-based sealers (C) in terms of survival, success rates (PICO1) sealer extrusion and resorption (PICO2) post-obturation pain (PICO3) (O)?' METHODS: Authors independently searched three electronic databases: PubMed (including MEDLINE), Web of Science, Embase and Scopus up to 31 October 2023. This was accompanied by both grey literature and manual search. Detailed selection criteria were applied, namely mature permanent teeth requiring root canal treatment, premixed bioceramic sealer with gutta-percha as an intervention group, a standard filling technique as control group and full-text available in English. A random-effect meta-analysis was used to synthesize the body of evidence regarding the use of bioceramic sealers in root canal treatment and their impact on post-obturation pain. Effect sizes were represented as relative risks on a logarithmic scale for binary outcomes and as mean differences for continuous outcomes. RESULTS: A total of 941 articles were identified. Fifteen Comparative clinical studies were finally included. Eleven were randomized clinical trials, and four were prospective clinical trials with control group. The follow-up of these studies was not greater than 2 years. No publication bias was observed in any study. No significant differences were observed between the two groups in terms of survival and success rates. A small non-significant lower risk of extrusion was observed for bioceramics. A small, non-significantly lower post-operative-pain within 24-h was observed when bioceramics were used. DISCUSSION: The majority of current evidence shows inconsistencies in reporting and is of short-term duration. Robust prospective long-term trials are needed in this area to better support future recommendations. CONCLUSION: This systematic review is the first to analyse several clinical outcomes using premixed sealers. Included studies differed in terms of clinical protocol and operator expertise, but reported a similar outcome when comparing bioceramic versus standard sealers. Tooth survival, treatment outcome, post-operative pain and periapical extrusion were similar and presented no significant differences between the two sealer types. REGISTRATION: PROSPERO database (CRD42023449151).

The local environment and germline genetic variation predict cancer risk in the UK Biobank prospective cohort.

BACKGROUND: There is a growing body of evidence on the effect of the local environment exposure on cancer susceptibility. Nonetheless, several of the associations remain controversial. Moreover, our understanding of the possible interaction between the local environment and the genetic variability is still very limited. OBJECTIVE: The aim of this study was to clarify the role of the local environment and its possible interplay with genetics on common cancers development. METHODS: Using the UK Biobank (UKBB) prospective cohort, we selected 12 local environment exposures: nitrogen oxides, nitrogen dioxides, particulate matter (10 and 2.5 µm), noise pollution, urban traffic, living distance from the coast, percentage of greenspace, natural environment, water, and domestic garden within 1000 m from the residential coordinates of each participant. All these exposures were tested for association with 17 different types of cancer for a total of 53,270 cases and 302,645 controls. Additionally, a polygenic score (PGS) was computed for each cancer, to test possible gene-environment interactions. Finally, mediation analyses were carried out. RESULTS: Thirty-six statistically significant associations considering multiple testing (p < 2.19 × 10-4) were observed. Among the novel associations we observed that individuals living farther from the coast had a higher risk of developing prostate cancer (OR = 1.13, CI95% = 1.06-1.20, P = 1.98 × 10-4). This association was partially mediated by physical activity (indirect effect (IE) = -8.48 × 10-7) and the time spent outdoor (IE = 9.07 × 10-6). All PGSs showed statistically significant associations. Finally, genome-environment interaction analysis showed that local environment and genetic variability affect cancer risk independently. DISCUSSION: Living close to the coast and air pollution were associated with a decreased risk of prostate cancer and skin melanoma, respectively. These findings from the UKBB support the role of the local environment on cancer development, which is independent from genetics and may be mediated by several lifestyle factors.

Assemblage Structure of Ichthyoplankton Communities in the Southern Adriatic Sea (Eastern Mediterranean).

Studies based on fish early life stages can provide information on spawning grounds and nursery areas, helping to determine the implications for stock biomass fluctuations of recruitment variability. This study describes the composition, abundance, spatial distribution and differences in day/night vertical distribution of ichthyoplankton in the southern Adriatic Sea. Samples were collected within the framework of the COCONET project (Towards COast to COast NETworks of marine protected areas) from 9 to 18 May 2013 by the R/V Urania, using the electronic multinet EZ-NET BIONESS (Bedford Institute of Oceanography Net Environmental Sampling System). A total of 20 species, belonging to 20 genera and 13 families, were identified. Of the collected larvae, 74.3% were meso- or bathypelagic species, 24.7% were epipelagic and 0.9% were demersal. The community was dominated by Gonostomatidae, followed by Engraulidae, Myctophidae and Photychthaidae. The most abundant species was Cyclothone braueri (45.6%), followed by Engraulis encrasicolus, Ceratoscopelus maderensis, Cyclothone pygmaea, Vinciguerria attenuata and Myctophum punctatum. An inshore/offshore increasing gradient in biodiversity and abundance was observed. Different weighted mean depths (WMDs) were observed for larvae and juveniles. No diel vertical migrations were observed. The high abundance of meso- or bathypelagic species in the upper 100 m confirms the epipelagic zone as an important environment for the development of the larval stages of these fish.

The use of two-piece transmucosal implants designed with a convergent neck: a 6-year clinical prospective cohort study and impact on gingival and bone tissues.

PURPOSE: This prospective study evaluated the marginal bone level and periodontal parameters 6 years after placement of a convergent transmucosal neck implant. MATERIALS AND METHODS: In total, 71 implants were placed in 60 patients. Of these, 52 implants were placed with a flapless technique and with the convergent neck exposed for 1.0 mm (early and delayed placement), while 19 implants were placed immediately after extraction (immediate placement). At least 3 months after insertion, customised abutments were applied and provisional resin crowns were cemented, while being careful to prevent any tissue compression. After 3 weeks, definitive metal-ceramic crowns were designed with the finishing line at the soft tissue level and free from any compression. The implant survival rate at 6 years, marginal bone level changes (MBL, mm), and Pink Esthetic Score (PES) were evaluated. Gingival phenotype was determined before the implant surgeries (thin/thick). A three-level hierarchical model was examined with a random intercept and random slope on follow-up time at the patient level, and a random intercept at the implant level. RESULTS: In all, 57 patients with 67 implants reached the 6 year point; 3 (5.0%) dropped out. The implant survival rate was 100%. ΔMBL T0-T24 was 0.58 mm (95% CI 0.48, 0.68), while ΔMBL T24-T72 was 0.33 mm (95% CI 0.19, 0.47). PES improved steadily from 6 to 48 months (+0.96; 95% CI 0.71, 1.20), with overall stability at 72 months. No correlation between MBL and PES was observed. A significant association was found between the gingival phenotype and less MBL variation. Greater implant diameter offered more MBL stability after 3 years, but lower PES values. CONCLUSION: The use of convergent transmucosal neck implants placed with a flapless transmucosal approach with the crown margin positioned at the gingival level preserved marginal bone and guided gingival morphology for up to 72 months. The gingival phenotype was the parameter that most affected the soft and hard tissues. In the long term, implant placement timing was not related to MBL.

Sanctuaries are not inviolable: Haplosporidium pinnae as responsible for the collapse of the Pinna nobilis population in Lake Faro (central Mediterranean).

The rapid spread of the protozoan Haplosporidium pinnae is having a strong negative effect on Pinna nobilis populations. A case study on a residual population in Lake Faro (Sicily, Central Mediterranean), whose long-term monitoring has revealed a dramatic decline following the 2018-2020 mass mortality event, is presented. In the framework of such monitoring, we performed tissue sampling on nine living P. nobilis, detecting the pathogen in seven of them. In contrast, other pathogens associated with P. nobilis disease in other areas, i.e., Mycobacterium spp. and Vibrio mediterranei, were not recorded. The surviving individuals (approximately twenty) showed that brackish areas only weakly mitigate the effects of H. pinnae disease and might not be resolutive. Nevertheless, the results show that Lake Faro may constitute one of the last Mediterranean P. nobilis sanctuaries.

Analysis of exposome and genetic variability suggests stress as a major contributor for development of pancreatic ductal adenocarcinoma.

BACKGROUND: The current knowledge on pancreatic ductal adenocarcinoma (PDAC) risk factors is limited and no study has comprehensively tested the exposome in combination with the genetic variability in relation to the disease susceptibility. AIM: The aim of this study was to analyze the exposome and its interaction with known genetic susceptibility loci, in relation to PDAC risk. METHODS: A case-control study nested in UK Biobank cohort was conducted on 816 PDAC cases and 302,645 controls. A total of 347 exposure variables, and a polygenic risk score (PRS) were analyzed through logistic regression. Gene-environment interaction analyses were conducted. RESULTS: A total of 52 associations under the Bonferroni corrected threshold of p < 1.46 × 10-4 were observed. Known risk factors such as smoking, pancreatitis, diabetes, PRS, heavy alcohol drinking and overweight were replicated in this study. As for novel associations, a clear indication for length and intensity of mobile phone use and the stress-related factors and stressful events with increase of PDAC risk was observed. Although the PRS was associated with PDAC risk (P = 2.09 × 10-9), statistically significant gene-exposome interactions were not identified. CONCLUSION: In conclusion, our results suggest that a stressful lifestyle and sedentary behaviors may play a major role in PDAC susceptibility independently from the genetic background.

10-year Historical Prospective Cohort Study of Calcium Phosphate-Blasted Acid-Etched Titanium Implants Placed in Different Ridges.

Purpose: To evaluate the survival rate and marginal bone level (MBL) of calcium phosphate-blasted acid-etched titanium implants placed in a cohort of patients with different ridges after a follow-up period of at least 10 years. Materials and Methods: A total of 61 patients with a minimum implant follow-up of 10 years were selected for this historical prospective, best clinical practice cohort study. Between 2009 and 2012, 121 titanium implants were placed using a flap, flapless, or postextractive technique. The implant placement timing was performed according to pre-extractive diagnosis and divided into immediate (immediately after tooth extraction with an absence of infection), early (within 2 to 3 months with an acute periapical lesion), delayed (6 to 12 months from extraction with a large periapical infection), or late (> 12 months from extraction with healed edentulous ridges). All implants were loaded after 3 months with provisional and definitive cemented restorations. Periapical radiographs were taken before implant insertion and at 3, 6, 12, 24, 36, 48, 96, and 120 months (T3, T6, T12, T24, T36, T48, T96, and T120, respectively). The MBL was calculated in single blind by an additional examiner. Linear logistic regression was performed to analyze statistically significant differences in relation to different operative variables at all evaluation times. Multilevel mixed logistic regression was made to evaluate the factors associated to MBL at 10 years (T120). Results: After 10 years, 47 patients and 92 implant restorations were analyzed, showing that 88 implants (95.6%) survived and 4 implants (4.4%) failed. The cumulative drop-out rate was 22.1%. Loosening and/or mobility was observed in a total of 9 abutments (9.7%) during the observational time. No other complications were reported. Implants placed with a flapless technique revealed a similar MBL to those placed with a flap technique. No significant differences were observed between the surgical techniques at T96 and T120. Immediate and early implants revealed a more stable MBL than both delayed and late implants up to T48. At longer evaluation times (T96 and T120), the MBL values were not statistically significant (P > .05). Narrower diameter implants (3.5 mm) revealed a higher bone loss when compared to the 4.1-mm- and 5.0-mm-diameters, especially in the first year from implant insertion (from T3 to T12) and at longer follow-up (T36 and T48). After that, the difference was reduced. Multilevel analysis showed that none of these variables appear to significantly influence MBL at 120 months. Conclusions: MBL was not influenced by surgical technique or implant placement timing after 10 years. Maintaining a strict occlusal and hygiene control created the conditions to preserve bone integrity and achieve a high implant survival rate.

Mineralization and morphology of peri-implant bone around loaded and unloaded dental implants retrieved from the human mandible.

PURPOSE: Limited data is reported regarding the bone mineralization around dental implants in the first months from insertion. The study analyzed the peri-implant bone around loaded and unloaded implants retrieved from human mandible after 4 months from placement. METHOD: The composition and mineralization of human bone were analyzed through an innovative protocol technique using Environmental-Scanning-Electron-Microscopy connected with Energy-Dispersive-X-Ray-Spectroscopy (ESEM/EDX). Two regions of interest (ROIs, approximately 750×500 µm) for each bone implant sample were analyzed at the cortical (Cortical ROI) and apical (Apical ROI) implant threads. Calcium, phosphorus, and nitrogen (atomic%) were determined using EDX, and the specific ratios (Ca/N, P/N, and Ca/P) were calculated as mineralization indices. RESULTS: Eighteen implant biopsies from ten patients were analyzed (unloaded implants, n=10; loaded implants, n=8). For each ROI, four bone areas (defined bones 1-4) were detected. These areas were characterized by different mineralization degree, varied Ca, P and N content, and different ratios, and by specific grayscale intensity detectable by ESEM images. Bony tissue in contact with loaded implants at the cortical ROI showed a higher percentage of low mineralized bone (bone 1) and a lower percentage of remodeling bone (bone 2) when compared to unloaded implants. The percentage of highly mineralized bone (bone 3) was similar in all groups. CONCLUSION: Cortical and apical ROIs resulted in a puzzle of different bone "islands" characterized by various rates of mineralization. Only the loaded implants showed a high rate of mineralization in the cortical ROI.

The Use of Premixed Calcium Silicate Bioceramic Sealer with Warm Carrier-Based Technique: A 2-Year Study for Patients Treated in a Master Program.

BACKGROUND: Recently several calcium silicate flowable sealers have been introduced as endodontic materials for the root canal. This clinical study tested the use of a new premixed calcium silicate bioceramic sealer in association with the Thermafil warm carrier-based technique (TF). Epoxy-resin-based sealer with the warm carrier-based technique was the control group. METHODOLOGY: Healthy consecutive patients (n = 85) requiring 94 root canal treatments were enrolled in this study and assigned to one filling group (Ceraseal-TF n = 47, AH Plus-TF n = 47) in accordance with operator training and best clinical practice. Periapical X-rays were taken preoperatively, after root canal filling and after 6, 12 and 24 months. Two evaluators blindly assessed the periapical index (PAI) and sealer extrusion in the groups (k = 0.90). Healing rate and survival rate were also evaluated. Chi-square tests was used to analyze significant differences between the groups. Multilevel analysis was performed to evaluate the factors associated with healing status. RESULTS: A total of 89 root canal treatments in 82 patients were analyzed at the end-line (24 months). The total drop-out was 3.6% (3 patients; 5 teeth). A total of 91.1% of healed teeth (PAI 1-2) was observed in Ceraseal-TF, with 88.6% in AH Plus-TF. No significant difference was observed on healing outcome and survival among the two filling groups (p > 0.05). Apical extrusion of the sealers occurred in 17 cases (19.0%). Of these, 6 occurred in Ceraseal-TF (13.3%) and 11 in AH Plus-TF (25.0%). Three Ceraseal extrusions were radiographically undetectable after 24 months. All the AH Plus extrusions did not change during the evaluation time. CONCLUSIONS: The combined use of the carrier-based technique and premixed CaSi-based bioceramic sealer showed clinical results comparable with carrier-based technique and epoxy-resin-based sealer. The radiographical disappearance of apically extruded Ceraseal is a possible event in the first 24 months.

Tissue-Level Laser-Lok Implants Placed with a Flapless Technique: A 4-Year Clinical Study.

BACKGROUND: The present study aims to analyze the use of Laser-Lok microtextured neck implants placed with a transmucosal surgical approach. The marginal bone level (MBL) and periodontal parameters were evaluated in a cohort prospective 4-year clinical study. METHODS: A total of 41 implants were placed in 36 healthy consecutive patients (16 males, 20 females, mean age 60 ± 9 years). Tapered tissue level implants, characterized by a 2.0 mm laser-microtextured neck, were used with a flapless approach. Customized abutments and provisional resin crowns were positioned. Definitive metal-ceramic crowns were cemented approximately 4 months after insertion. Periapical radiographs were taken after 1, 3, 6, 12, 36 and 48 months from implant placement to evaluate MBL. Gingival thickness (thin/thick), plaque score (PS) and bleeding on probing (BoP) were evaluated. RESULTS: After 48 months, all implants were safe from complications. No complications, peri-implantitis, early implant failures or mucositis occurred. The survival rate was 100%. Mean MBL during the follow-up was -0.15 ± 0.18 at T1, -0.29 ± 0.29 at T3, -0.45 ± 0.37 at T6, -0.53 ± 0.45 at T12, -1.06 ± 1.13 at T 36 and -1.10 ± 0.89 at T 48. Implants placed 2-3 months after tooth extraction revealed lower MBL variation when compared to those placed immediately (in fresh extraction sockets) or in completely healed ridges (delayed group). Narrower diameter implants (3.8 mm) showed significantly higher MBL variation when compared to 4.6 diameter implants. Multilevel analysis at T48 revealed that among all the evaluated variables, implant diameter was the factor mostly associated with MBL modifications (p = 0.027). CONCLUSION: This 4-year clinical study supports the use of Laser-Lok implants placed at tissue level with a flapless approach. A limited bone loss during the 48-month follow-up was observed. Periodontal parameters were stable with no sign of inflammation or soft tissue alteration. The use of Laser-Lok implants with transmucosal surgery represents a suitable technique with a minimally invasive approach.

Asana for Neck, Shoulders, and Wrists to Prevent Musculoskeletal Disorders among Dental Professionals: In-Office Yóga Protocol.

Extensive literature reports an increase in physical disorders (pain, pathologies, dysfunctions) and mental malaise/uneasiness (stress, burnout) affecting dental professionals in relation to fast and pressing rhythms of work, long working hours, increasingly demanding patients, ever-evolving technologies, etc. This project has been conceived to bring the science of yoga around the world to dental professionals as a preventive (occupational) medicine and to provide knowledge and means for self-care. Yoga is a concentrative self-discipline of the mind, senses, and physical body, that requires regular daily exercise (or meditation), attention, intention, and disciplined action. M&M: The study aimed to design a Yoga protocol specifically devised for dental professionals (dentists, dental hygienists, and dental assistants) including positions (asana) to be practiced/used in the dental office. The protocol is targeted for the upper body, namely neck, upper back, chest, shoulder girdle, and wrists, being areas greatly affected by work-related musculoskeletal disorders. This paper represents a yoga-based guideline for the self-cure of musculoskeletal disorders among dental professionals. Results: The protocol includes both sitting (Upavistha position) and standing (Utthana or Sama position) asana, with twisting (Parivrtta), side bending (Parsva), flexion and forward bending (Pashima), and extension and arching (Purva) asana to mobilize and decompress, and to provide nourishment and oxygen to the musculo-articular system. The paper delivers different concepts and theories developed and deepened by the authors and introduces and spreads yoga as a medical science among dental professionals for the prevention and treatment of work-related musculoskeletal disorders. We articulate notions ranging from stretching out using the vinyasa method (breath-driven movement) and inward-focused attention to contemplative/concentrative science, interoceptive attention, self-awareness, the mind-body connection, and receptive attitude. The theory of "muscles are bone ties" is coined and delivered with regard to tensegrity musculoskeletal fascial structures connecting, pulling together, and nearing the bone segments where they are anchored. The paper describes over 60 asana envisaged to be performed on dental stools or using the walls of a dental office or a dental unit chair. A detailed guideline on the work-related disorders that can find relief with the protocol is provided, including the description of breath control for the practice of asana in vinyasa. The foundations of the technique reside in the IyengarYoga method and ParinamaYoga method. Conclusions: This paper represents a guideline for self-cure in the prevention or treatment of musculoskeletal disorders affecting dental professionals. Yoga is a powerful concentrative self-discipline able to provide physical and mental well-being, representing great help and support in daily life and business for dental professionals. Yógasana restores retracted and stiff muscles, giving relief to the strained and tired limbs of dental professionals. Yoga is not intended for flexible or physically performing persons but for people who decide to take care of themselves. The practice of specific asana represents a powerful tool for the prevention or treatment of MSDs related to poor posture, forward head, chronic neck tension (and related headache), depressed chest, compressive disorders on wrists and shoulders as carpal tunnel, impingement syndromes, outlet syndrome, subacromial pain syndrome and spinal disc pathologies. Yoga, as an integrative science in medicine and public health, represents a powerful tool for the prevention and treatment of occupational musculoskeletal disorders and an extraordinary path for the self-care of dental professionals, sitting job workers, and healthcare providers suffering from occupational biomechanical stresses and awkward postures.

Prevaccination Glucose Time in Range Correlates With Antibody Response to SARS-CoV-2 Vaccine in Type 1 Diabetes.

CONTEXT: Poor glucose control has been associated with increased mortality in COVID-19 patients with type 1 diabetes (T1D). OBJECTIVE: This work aimed to assess the effect of prevaccination glucose control on antibody response to the SARS-CoV-2 vaccine BNT162b2 in T1D. METHODS: We studied 26 patients with T1D scheduled to receive 2 doses, 21 days apart, of BNT162b2, followed prospectively for 6 months with regular evaluation of SARS-CoV-2 antibodies and glucose control. Immunoglobulin G (IgG) to spike glycoprotein were assessed by enzyme-linked immunosorbent assay, and serum neutralization by a live SARS-CoV-2 assay (Vero E6 cells system). Glycated hemoglobin A1c (HbA1c) and continuous glucose monitoring (CGM), including time in range (TIR) and above range (TAR), were collected. The primary exposure and outcome measures were prevaccination glucose control, and antibody response after vaccination, respectively. RESULTS: Prevaccination HbA1c was unrelated to postvaccine spike IgG (r = -0.33; P = .14). Of note, the CGM profile collected during the 2 weeks preceding BNT162b2 administration correlated with postvaccine IgG response (TIR: r = 0.75; P = .02; TAR: r = -0.81; P = .008). Patients meeting the recommended prevaccination glucose targets of TIR (≥ 70%) and TAR (≤ 25%) developed stronger neutralizing antibody titers (P < .0001 and P = .008, respectively), regardless of HbA1c. Glucose control along the study time frame was also associated with IgG response during follow-up (TIR: r = 0.93; P < .0001; TAR: r = -0.84; P < .0001). CONCLUSION: In T1D, glucose profile during the 2 weeks preceding vaccination is associated with stronger spike antibody binding and neutralization, highlighting a role for well-controlled blood glucose in vaccination efficacy.

Endodontic Microbial Communities in Apical Periodontitis.

INTRODUCTION: Apical periodontitis (AP) represents an inflammatory condition of peri-radicular tissues due to invasion and colonization of bacteria in the root canals. Primary apical periodontitis (PAP) is associated with untreated necrotic root canal and can be efficiently treated with endodontic treatment to remove bacteria. Persistent/secondary apical periodontitis (SAP) is a perpetual periapical lesion due to unsuccessfully treated root canals after an initial apparent healing of the tooth. The aim of the study was evaluating the microbial communities associated with root canals using Nanopore sequencing. METHODS: Seventeen samples from the root canals of 15 patients with AP were Polymerase Chain Reaction-amplified for 16s ribosomal DNA gene and sequenced. Information regarding the presence or absence of AP symptoms, PAP and SAP, and periapical index of patients were recorded. RESULTS: Firmicutes, Bacteroidetes, and Actinobacteria were the most abundant phyla detected and Phocaeicola, Pseudomonas, Rothia, and Prevotella were the most prominent genera. In samples of patients with AP symptoms, the most frequent detected genera were Cutibacterium, Lactobacillus, Pseudomonas, Dialister, Prevotella, and Staphylococcus. In PAP samples, the most represented genera were Cutibacterium, Lactobacillus, Pseudomonas, and Prevotella, whilst in SAP cases were Cutibacterium, Prevotella, Atopobium, Capnocytophaga, Fusobacterium, Pseudomonas, Solobacterium, and Streptococcus. CONCLUSIONS: The results provide additional information on the microbiota of root-canals. These data evidence the complexity of the microbiota and the relationship with many clinical and endodontic conditions. Future studies must evaluate these conditions and identify their role in inducing bone damage and local and systemic disease, aiming to better elucidate the relationship between microbes and endodontic pathologies.

Asana for Back, Hips and Legs to Prevent Musculoskeletal Disorders among Dental Professionals: In-Office Yóga Protocol.

Dental professionals are exposed to significant unavoidable physical stress, and theoretical ergonomic recommendations for a sitting workplace are inapplicable in many dental activities. Work-related musculoskeletal disorders (WMSDs) represent a serious health problem among dental professionals (prevalence: 64-93%), showing involvement of 34-60% for the low back and 15-25% for the hips. Muscle stress; prolonged sitting; forward bending and twisting of the torso and head; unbalanced working postures with asymmetrical weight on the hips and uneven shoulders; and others are inevitable for dental professionals. Therefore, the approach for the prevention and treatment of WMSDs must be therapeutic and compensatory. This project was conceived to provide a Yoga protocol for dental professionals to prevent or treat WMSDs from a preventive medicine perspective, and it would represent a Yoga-based guideline for the self-cure and prevention of musculoskeletal problems. METHODS: Specific Yoga positions (asana, such as Virasana, Virabhadrasana, Garudasana, Utkatasana, Trikonasana, Anuvittasana, Chakrasana, Uttanasana, Pashimottanasana) have been selected, elaborated on and adapted to be practiced in a dental office using a dental stool or the dental office walls or a dental unit chair. The protocol is specifically devised for dental professionals (dentists, dental hygienists and dental assistants) and targeted for the low back, hips and legs (including knees and ankles). The protocol includes Visranta Karaka Sthiti (supported positions) in sitting (Upavistha Sthiti) and standing (Utthistha Sthiti) positions, twisting/torsions (Parivrtta), flexions/forward bend positions (Pashima) and extensions/arching (Purva) for musculo-articular system decompression and mobilization. RESULTS: Over 60 Yogasana-specifically ideated for back detensioning and mobilization, lumbar lordosis restoration, trunk side elongation, hip release and leg stretches and decontraction-are shown and described. The paper provides a meticulous description for each position, including the detailed movement, recommendations and mistakes to avoid, and the breathing pattern (breath control) in all the breath-driven movements (asana in vinyasa). An exhaustive analysis of posture-related disorders affecting the lower body among dental professionals is reported, including low-back pain, hip pain and disorders, piriformis syndrome and quadratus femoris dysfunction (gluteal pain), iliopsoas syndrome, multifidus disorders, femoroacetabular and ischiofemoral impingement, spinopelvic mobility, lumbopelvic rhythm, impairment syndromes, lower crossed syndrome, leg pain, knee pain and ankle disorders. CONCLUSIONS: A detailed guideline of asana for low-back decompression, hip joint destress, piriformis and gluteal muscle release, lumbar lordosis recovery and a spinopelvic mobility increase has been elaborated on. The designed Yogasana protocol represents a powerful tool for dental professionals to provide relief to retracted stiff muscles and unbalanced musculoskeletal structures in the lower body.

Chemical-Physical Properties and Bioactivity of New Premixed Calcium Silicate-Bioceramic Root Canal Sealers.

The aim of the study was to analyze the chemical−physical properties and bioactivity (apatite-forming ability) of three recently introduced premixed bioceramic root canal sealers containing varied amounts of different calcium silicates (CaSi): a dicalcium and tricalcium silicate (1−10% and 20−30%)-containing sealer with zirconium dioxide and tricalcium aluminate (CERASEAL); a tricalcium silicate (5−15%)-containing sealer with zirconium dioxide, dimethyl sulfoxide and lithium carbonate (AH PLUS BIOCERAMIC) and a dicalcium and tricalcium silicate (10% and 25%)-containing sealer with calcium aluminate, tricalcium aluminate and tantalite (NEOSEALER FLO). An epoxy resin-based sealer (AH PLUS) was used as control. The initial and final setting times, radiopacity, flowability, film thickness, open pore volume, water absorption, solubility, calcium release and alkalizing activity were tested. The nucleation of calcium phosphates and/or apatite after 28 days aging in Hanks balanced salt solution (HBSS) was evaluated by ESEM-EDX, vibrational IR and micro-Raman spectroscopy. The analyses showed for NeoSealer Flo and AH Plus the longest final setting times (1344 ± 60 and 1300 ± 60 min, respectively), while shorter times for AH Plus Bioceramic and Ceraseal (660 ± 60 and 720 ± 60 min, respectively). Radiopacity, flowability and film thickness complied with ISO 6876/12 for all tested materials. A significantly higher open pore volume was observed for NeoSealer Flo, AH Plus Bioceramic and Ceraseal when compared to AH Plus (p < 0.05), significantly higher values were observed for NeoSealer Flo and AH Plus Bioceramic (p < 0.05). Ceraseal and AH Plus revealed the lowest solubility. All CaSi-containing sealers released calcium and alkalized the soaking water. After 28 days immersion in HBSS, ESEM-EDX analyses revealed the formation of a mineral layer that covered the surface of all bioceramic sealers, with a lower detection of radiopacifiers (Zirconium for Ceraseal and AH Plus Bioceramic, Tantalum for NeoSealer Flo) and an increase in calcium, phosphorous and carbon. The calcium phosphate (CaP) layer was more evident on NeoSealer Flo and AH Plus Bioceramic. IR and micro-Raman revealed the formation of calcium carbonate on the surface of all set materials. A thin layer of a CaP phase was detected only on AH Plus Bioceramic and NeoSealer Flo. Ceraseal did not show CaP deposit despite its highest calcium release among all the tested CaSi-containing sealers. In conclusion, CaSi-containing sealers met the required chemical and physical standards and released biologically relevant ions. Slight/limited apatite nucleation was observed in relation to the high carbonation processes.

Shock loss measurements in non-ideal supersonic flows of organic vapors.

This paper presents the first ever direct measurements of total pressure losses across shocks in supersonic flows of organic vapors in non-ideal conditions, so in the thermodynamic region close to the liquid-vapor saturation curve and the critical point where the ideal gas law is not applicable. Experiments were carried out with fluid siloxane MM (hexamethyldisiloxane, C 6 H 18 OSi 2 ), commonly employed in medium-/high-temperature organic Rankine cycles (ORCs), in the Test Rig for Organic VApors (TROVA), a blowdown wind tunnel at the Laboratory of Compressible fluid dynamics for Renewable Energy Applications (CREA lab) of Politecnico di Milano. A total pressure probe was inserted in superheated MM vapor flow at Mach number ∼ 1.5 with total conditions in the range 215 - 230 ∘ C and 2 - 12 bar at varying levels of non-ideality, with a compressibility factor evaluated at total conditions between Z T = 0.68 - 0.98 . These operating conditions are representative of the first-stage stator of ORC turbines. Measured shock losses were compared with those calculated from pre-shock quantities by solving conservation equations across a normal shock, with differences always below 2 % attesting a satisfactory reliability of the implemented experimental procedure. An in-depth analysis was then carried out, highlighting the direct effects of non-ideality on shock intensity. Even at the mildly non-ideal conditions with Z T ≳ 0.70 considered here, non-ideality was responsible for a significantly stronger shock compared to the ideal gas limit at same pre-shock Mach number, with differences as large as 6 % .

ESEM-EDX Microanalysis at Bone-Implant Region on Immediately Loaded Implants Retrieved Postmortem.

PURPOSE: The aim of the study was to analyze the microchemistry of human bone in different regions of interest (ROIs) on histologic samples of implants retrieved postmortem by the innovative use of an environmental scanning electronic microscope (ESEM) connected to energy-dispersive x-ray spectroscopy (EDX). MATERIALS AND METHODS: Maxillary and mandibular bone blocks with inserted implants (n = 12) were obtained postmortem from a patient. The histologic samples were observed uncoated using ESEM in quadrant backscattered condition. Two ROIs (approximately 750 × 500 µm) for each implant were analyzed corresponding to the cortical thread (cortical ROI) and the middle part of each implant (approximately 3.0 mm below; middle ROI). Different electron-dense bone tissue areas were detected through grayscale intensity quantification of ESEM images. Calcium (Ca), phosphorous (P), and titanium (Ti; atomic %) were evaluated by EDX, and Ca/P ratios were calculated and used as the index to identify areas with different mineralization. The presence of Ti contaminants was investigated by EDX microanalysis. Additional ROIs approximately 2.0 mm from the implant interface and not in connection with the implant surface were analyzed as the control. RESULTS: Four bone areas (BAs) with different degrees of mineralization (from 1 as the lowest mineralized to 4 as the highest mineralized) were identified by Ca and P content and by tissue electron density. BA1 (bone marrow areas) and BA2 (areas with active bone remodeling) proved to have low levels of Ca and P, while BA3 (mineralized new bone areas) and BA4 (control cortical bone) had higher content of Ca and P and higher electron density. Mandibular ROIs displayed higher percentages of BA3 and BA4, while maxillary ROIs revealed a greater presence of BA2 and moderate presence of BA1. Control bone showed a high percentage of BA4. Cortical and middle ROIs showed similar BA distribution within mandibular bone, whereas in maxillary bone, a slightly higher presence of BA1 was observed. Ti ions were detected in ROIs of all specimens; the atomic % significantly decreased in the most distant areas. Ti particles were observed close to the implant interface. Analyses 2.0 mm distant from the implant thread revealed low traces of Ti in healthy bone tissue. CONCLUSION: The high percentage of BA3 and BA4 in mandibular blocks associated with low presence of BA2 suggested the fast formation of compact bone tissue after 7 months from the implant placement. The presence of BA2 in maxilla blocks suggested active bone remodeling still present after 7 months. Ti particles were observed throughout the ROIs with and without bone remodeling activity. ESEMEDX resulted as a suitable technique to obtain more complete information on microchemistry composition and density/mineralization of bone around implants. For clinical significance, maxillary and mandibular peri-implant bone revealed different mineralization patterns, which means different healing times. The presence of Ti particles at the bone-implant interface and ion translocation, likely due to wear forces in the times following the implant insertion, do not affect the bone remodeling process.

Direct velocity measurements in high-temperature non-ideal vapor flows.

Direct velocity measurements in a non-ideal expanding flow of a high temperature organic vapor were performed for the first time using the laser Doppler velocimetry technique. To this purpose, a novel seeding system for insemination of high-temperature vapors was specifically conceived, designed, and implemented. Comparisons with indirectly measured velocity, namely inferred from pressure and temperature measurements, are also provided. Nozzle flows of hexamethyldisiloxane (MM, C 6 H 18 OSi 2 ) at temperature up to 220 ∘ C and pressure up to 10 bar were taken as representative of non-ideal compressible-fluid flows. The relative high temperature, high pressure and the need of avoiding contamination pose strong constraints on the choice of both seeding system design and tracer particle, which is solid. A liquid suspension of tracer particles in hexamethyldisiloxane is injected through an atomizing nozzle in a high-temperature settling chamber ahead of the test section. The spray droplets evaporate, while the particles are entrained in the flow to be traced. Three different test cases are presented: a subsonic compressible nozzle flow with a large uniform region at Mach number 0.7, a high velocity gradient supersonic flow at Mach number 1.4 and a near-zero velocity gradient flow at Mach number 1.7. Temperature, pressure and direct velocity measurements are performed to characterize the flow. Measured velocity is compared with both computational fluid dynamics (CFD) calculations and velocity computed from pressure and temperature measurements. In both cases, the thermodynamic model applied was a state-of-the-art Helmoltz energy equation of state. A maximum velocity deviation of 6.6% was found for both CFD simulations and computed velocity.

Musculoskeletal Disorders among Italian Dentists and Dental Hygienists.

Dental professionals often perform physically and mentally demanding therapeutical procedures. They work maintaining muscular imbalance and asymmetrical positions for a long time. The aim of the study was to describe the prevalence and the factors associated to work-related musculoskeletal disorders (WMSD) among Italian dental professionals and the most affected body regions. A cross-sectional observational study was conducted between March 2019 and February 2020. The Nordic Musculoskeletal questionnaire (NMQ) was implemented with questions related to working habits (dental occupation, working hours per week and per days, years of work) and lifestyle (practiced physical activity, including frequency and duration, mobilization activities, and knowledge of ergonomic guidelines) was used. The-chi square test was carried out to detect any statistically significant difference (p < 0.05). Logistic regression was carried out to detect the most significant factors associated to WMSD occurrence. A total of 284 questionnaires have been used for the analysis. A high proportion of dental professionals (84.6%) were affected by WMSD in the last 12 months. A higher prevalence was found in females (87%) when compared to males (80%). The prevalence of WMSD was correlated to the working hours/day and hour/week, with a higher risk for operators working >5 h/day and >30 h/week. In addition, a high prevalence was found in operators working for 2-5 years after graduation. Most of the surveyed dental professionals practiced physical activity (70.1%) but only a few had satisfactorily knowledge of ergonomic guidelines (12.7%). Interestingly, participants who practiced yoga or stretching as physical activities demonstrated lower WMSD (77%) when compared to other physical activities (84%). We can highlight that generic physical activities have no functional effect on WMSD for dental professionals. The most affected body areas were neck (59.9%), shoulders (43.3%), lumbar region (52.1%), dorsal region (37.7%) and wrists (30.6%). Considering the magnitude of the problem, there is an urgent need to implement the education in ergonomics among dental professionals, that may be achieved by teaching biomechanics, posturology and integrative functional therapies (such as yoga) during the university education and by promoting holistic health of dental operators.

In-Depth Metallurgical and Microstructural Analysis of Oneshape and Heat Treated Onecurve Instruments.

OBJECTIVE: To define surface, mechanical, microstructural and metallurgical features of conventional One-Shape (OShape) and heat-treated OneCurve (OCurve) nickel-titanium instruments. METHODS: Instruments were analysed by scanning electron microscopy (SEM) on new instruments and after simulated clinical use (SCU). Cyclic fatigue testing was performed and the number of cycles to fracture (NCF) and the length of the fractured instruments were measured (Mann-Whitney test). Fractured instruments during cyclic fatigue testing were then inspected by SEM fractographic analysis. Field emission gun scanning scanning electron microscopy (FEG-SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-Raman spectroscopy were used to assess alloy surface chemistry. Focused ion beam (FIB) was performed to analyse the oxide layer on the surface of OCurve before and after SCU. X-Ray diffraction (XRD), metallographic evaluation and differential scanning calorimetry (DSC) were used to determine martensitic/austenitic phase transformation temperatures. RESULTS: SEM observations on new instruments revealed a smooth regular surface with flattened milling grooves. No wear features were detected after SCU. OCurve exhibited a higher cyclic fatigue resistance (P<0.05), slower crack propagation and a surface layer of TiO2. Metallographic analysis and XRD showed the prevalence of martensitic grains on OCurve instruments that were stable at body temperature as confirmed by DSC analysis. Furthermore, DSC demonstrated a shift in the temperature transformation ranges suggesting an increase of martensite phase in autoclaved OCurve instruments. CONCLUSION: Heat treatment processes were confirmed as a valid enhancement of the properties of the new generation NiTi instruments. OCurve presented a significant improvement over OShape regarding both mechanical and metallurgical characteristics.