Identification of the Segregation Kinetics of Ultrathin GaAsSb/GaAs Films Using AlAs Markers.

For optoelectronic devices from the near to the far infrared, the advantages of using ultrathin III-Sb layers as quantum wells or in superlattices are well known. However, these alloys suffer from severe surface segregation problems, so that the actual profiles are very different from the nominal ones. Here, by inserting AlAs markers within the structure, state-of-the-art transmission electron microscopy techniques were used to precisely monitor the incorporation/segregation of Sb in ultrathin GaAsSb films (from 1 to 20 monolayers (MLs)). Our rigorous analysis allows us to apply the most successful model for describing the segregation of III-Sb alloys (three-layer kinetic model) in an unprecedented way, limiting the number of parameters to be fitted. The simulation results show that the segregation energy is not constant throughout the growth (which is not considered in any segregation model) but has an exponential decay from 0.18 eV to converge asymptotically towards 0.05 eV. This explains why the Sb profiles follow a sigmoidal growth model curve with an initial lag in Sb incorporation of 5 MLs and would be consistent with a progressive change in surface reconstruction as the floating layer is enriched.

Tailoring of AlAs/InAs/GaAs QDs Nanostructures via Capping Growth Rate.

The use of thin AlA capping layers (CLs) on InAs quantum dots (QDs) has recently received considerable attention due to improved photovoltaic performance in QD solar cells. However, there is little data on the structural changes that occur during capping and their relation to different growth conditions. In this work, we studied the effect of AlA capping growth rate (CGR) on the structural features of InAs QDs in terms of shape, size, density, and average content. As will be shown, there are notable differences in the characteristics of the QDs upon changing CGR. The Al distribution analysis in the CL around the QDs was revealed to be the key. On the one hand, for the lowest CGR, Al has a homogeneous distribution over the entire surface, but there is a large thickening of the CL on the sides of the QD. As a result, the QDs are lower, lenticular in shape, but richer in In. On the other hand, for the higher CGRs, Al accumulates preferentially around the QD but with a more uniform thickness, resulting in taller QDs, which progressively adopt a truncated pyramidal shape. Surprisingly, intermediate CGRs do not improve either of these behaviors, resulting in less enriched QDs.

Suppressing the Effect of the Wetting Layer through AlAs Capping in InAs/GaAs QD Structures for Solar Cells Applications.

Recently, thin AlAs capping layers (CLs) on InAs quantum dot solar cells (QDSCs) have been shown to yield better photovoltaic efficiency compared to traditional QDSCs. Although it has been proposed that this improvement is due to the suppression of the capture of photogenerated carriers through the wetting layer (WL) states by a de-wetting process, the mechanisms that operate during this process are not clear. In this work, a structural analysis of the WL characteristics in the AlAs/InAs QD system with different CL-thickness has been made by scanning transmission electron microscopy techniques. First, an exponential decline of the amount of InAs in the WL with the CL thickness increase has been found, far from a complete elimination of the WL. Instead, this reduction is linked to a higher shield effect against QD decomposition. Second, there is no compositional separation between the WL and CL, but rather single layer with a variable content of InAlGaAs. Both effects, the high intermixing and WL reduction cause a drastic change in electronic levels, with the CL making up of 1-2 monolayers being the most effective configuration to reduce the radiative-recombination and minimize the potential barriers for carrier transport.