Marine waste derived carbon materials for use as sulfur hosts for Lithium-Sulfur batteries.

Lithium-sulfur batteries are a promising alternative to lithium-ion batteries as they can potentially offer significantly increased capacities and energy densities. The ever-increasing global battery market demonstrates that there will be an ongoing demand for cost effective battery electrode materials. Materials derived from waste products can simultaneously address two of the greatest challenges of today, i.e., waste management and the requirement to develop sustainable materials. In this study, we detail the carbonisation of gelatin from blue shark and chitin from prawns, both of which are currently considered as waste biproducts of the seafood industry. The chemical and physical properties of the resulting carbons are compared through a correlation of results from structural characterisation techniques, including electron imaging, X-ray diffraction, Raman spectroscopy and nitrogen gas adsorption. We investigated the application of the resulting carbons as sulfur-hosting electrode materials for use in lithium-sulfur batteries. Through comprehensive electrochemical characterisation, we demonstrate that value added porous carbons, derived from marine waste are promising electrode materials for lithium-sulfur batteries. Both samples demonstrated impressive capacity retention when galvanostatically cycled at a rate of C/5 for 500 cycles. This study highlights the importance of looking towards waste products as sustainable feeds for battery material production.

Boosting Supercapacitor Efficiency with Amorphous Biomass-Derived C@TiO2 Composites.

Carbon materials are readily available and are essential in energy storage. One of the routes used to enhance their surface area and activity is the decoration of carbons with semiconductors, such as amorphous TiO2, for application in energy storage devices.

Fabrication of Co-Sb Junction Nanowires by Galvanostatic Electrodeposition.

This work presents the synthesis of CoSb3 one-dimensional (1D) thermoelectric nanomaterials using electrodeposition under galvanostatic conditions and polycarbonate membranes as a template (50 nm diameter pores). Cyclic voltammetry measurements have been performed to get preliminary information on the electrochemical reduction process of the involved species. Different current density values in the range 1-4 mA cm-2 have been applied, leading to the formation of nanowires (NWs) and micro- and nanomushroom caps, as evidenced by the scanning electron microscopy and scanning transmission electron microscopy investigations. Through fine-tuning of the current density the desired Co/Sb atomic ratio could be achieved. Energy-dispersive X-ray spectroscopy analysis showed the formation of CoSb3 at 1.4 mA cm-2, and it has also been confirmed by high-resolution transmission electron microscopy and micro-Raman spectroscopy. In this work, we present for the first time the fabrication of a CoSb3-CoxSby heterojunction on the same NW exhibiting Sb-rich and Co-rich alloy segments, prepared by electrodeposition from the same electrolyte by simply varying the applied current density.

Renewable Carbon Materials as Electrodes for High-Performance Supercapacitors: From Marine Biowaste to High Specific Surface Area Porous Biocarbons.

Waste, in particular, biowaste, can be a valuable source of novel carbon materials. Renewable carbon materials, such as biomass-derived carbons, have gained significant attention recently as potential electrode materials for various electrochemical devices, including batteries and supercapacitors. The importance of renewable carbon materials as electrodes can be attributed to their sustainability, low cost, high purity, high surface area, and tailored properties. Fish waste recovered from the fish processing industry can be used for energy applications and prioritizing the circular economy principles. Herein, a method is proposed to prepare a high surface area biocarbon from glycogen extracted from mussel cooking wastewater. The biocarbon materials were characterized using a Brunauer-Emmett-Teller surface area analyzer to determine the specific surface area and pore size and by scanning electron microscopy coupled with energy-dispersive X-ray analysis, Raman analysis, attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. The electrochemical characterization was performed using a three-electrode system, utilizing a choline chloride-based deep eutectic solvent (DES) as an eco-friendly and sustainable electrolyte. Optimal time and temperature allowed the preparation of glycogen-based carbon materials, with a specific surface area of 1526 m2 g-1, a pore volume of 0.38 cm3 g-1, and an associated specific capacitance of 657 F g-1 at a current density of 1 A g-1, at 30 °C. The optimal material was scaled up to a two-electrode supercapacitor using a DES-based solid-state electrolyte (SSE@DES). This prototype delivered a maximum capacitance of 703 F g-1 at a 1 A g-1 of current density, showing 75% capacitance retention over 1000 cycles, delivering the highest energy density of 0.335 W h kg-1 and power density of 1341 W kg-1. Marine waste can be a sustainable source for producing nanoporous carbon materials to be incorporated as electrode materials in energy storage devices.

Chitins from Seafood Waste as Sustainable Porous Carbon Precursors for the Development of Eco-Friendly Supercapacitors.

Carbon materials derived from marine waste have been drawing attention for supercapacitor applications. In this work, chitins from squid and prawn marine wastes were used as carbon precursors for further application as electrodes for energy storage devices. Chitins were obtained through a deproteinization method based on enzymatic hydrolysis as an alternative to chemical hydrolysis as commonly presented in the literature. The obtained porous carbons were characterized using a BET surface area analyzer to determine the specific surface area and pore size, as well as scanning electron microscopy (SEM) with energy dispersive X-ray analysis (EDX), transmission electron microscopy (TEM), Raman spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), to characterize their morphology, composition, and structure. The electrochemical characterization was performed using a glassy carbon (GC) electrode modified with marine waste-based porous carbons as the working electrode through cyclic voltammetry and galvanostatic charge/discharge using ethaline, a choline chloride-based deep eutectic solvent (DES), as an eco-friendly and sustainable electrolyte. Squid and prawn chitin-based carbons presented a surface area of 149.3 m2 g-1 and 85.0 m2 g-1, pore volume of 0.053 cm3 g-1 and 0.029 cm3 g-1, and an associated specific capacitance of 20 and 15 F g-1 at 1 A g-1, respectively. Preliminary studies were performed to understand the effect of -OH groups on the chitin-based carbon surface with DES as an electrolyte, as well as the effect of aqueous electrolytes (1 mol L-1 sulphuric acid (H2SO4) and 1 mol L-1 potassium hydroxide (KOH)) on the capacitance and retention of the half-cell set up. It is provided, for the first time, the use of chitin-based carbon materials obtained through a one-step carbonization process combined with an eco-friendly DES electrolyte for potential application in energy storage devices.