Element associations in ash from waste combustion in fluidized bed.

The incineration of MSW in fluidized beds is a commonly applied waste management practice. The composition of the ashes produced in a fluidized bed boiler has important environmental implications as potentially toxic trace elements may be associated with ash particles and it is therefore essential to determine the mechanisms controlling the association of trace elements to ash particles, including the role of major element composition. The research presented here uses micro-analytical techniques to study the distribution of major and trace elements and determine the importance of affinity-based binding mechanisms in separate cyclone ash particles from MSW combustion. Particle size and the occurrence of Ca and Fe were found to be important factors for the binding of trace elements to ash particles, but the binding largely depends on random associations based on the presence of a particle when trace elements condensate in the flue gas.

Treatment process for MSW combustion fly ash laboratory and pilot plant experiments.

Fly ash from combustion of municipal solid waste sometimes contains large amounts of soluble salts, such as NaCl, even though the content of soluble toxic metal compounds is relatively low. Removal of the salts by washing with water has been suggested as a method to increase the stability of this type of ash. In the work presented here, a simple washing process was studied and evaluated. The process includes three steps: leaching with water, filtration and displacement washing. Basic data were obtained in laboratory experiments and used in the construction of pilot plant equipment at a full size fluidized bed boiler, where a side-stream of the cyclone ash was treated. The process was designed to minimize the water consumption while obtaining an effective removal of salts and a stable ash residue. In order to achieve this, recirculation of leaching liquor was used and the displacement washing was adjusted to become close to ideal. The results showed that an ash/water slurry with a liquid to solid ratio as low as 3 could be handled without difficulty in the mixing, pumping and filtration units. Washing of the filter cake at a liquid to solid ratio of 0.5 removed the major part of the remaining dissolved salts in the pore liquid. About 90% of the chloride content was removed from the ash, whereas the contents of Na, K, Ca, Cd, Pb and a number of other minor elements were removed by 10-30%. Before treatment, the results of ash leaching tests were sometimes too high for chloride (2003/33/EC), but the treatment reduced the amount of soluble chlorides to far below the limit values. The leachability of most metals was reduced or unaffected by the ash treatment. For Na, K and Cl, it was less than 10% of the value for the untreated ash. However, the results showed that some ash components may be mobilized by the washing. Antimony is the most important due to its toxicity.

A study of Cr(VI) in ashes from fluidized bed combustion of municipal solid waste: leaching, secondary reactions and the applicability of some speciation methods.

The use of the fluidized bed technique for the combustion of municipal solid waste is a rather new concept. This type of combustor produces ash residues with somewhat different properties than the residues generated from the traditional mass burn techniques. Therefore, chemical characterization and the investigation of toxic metals behavior during ash water reactions are necessary for the safe disposal of these residues. In the present work, the total elemental composition, mineralogy and leaching behavior of ashes from the combustion of municipal solid waste in a fluidized bed combustion boiler have been investigated. The cyclone ash and, in particular, the filter ash contained considerable amounts of soluble substances, thus giving leachates with high levels of Cl-, Na+, K+, Ca2 + and Al(IIl). On the other hand, the two ash fractions taken in the boiler, the bottom and hopper ashes, were much more stable with respect to the release of salts and heavy metals. Since Cr(VI) is mobile and toxic its release from combustion residues can pose environmental problem. Even though the total Cr contents were similar in all ashes studied, the bottom ash gave about a thousand times higher levels of Cr(VI) in test leachates than the hopper, cyclone and filter ashes. However, it was found that the leached amount of Cr(VI) from the bottom ash decreased significantly when bottom ash was mixed with the hopper ash. The most probable cause for this decrease is the coupled oxidation of Al(0) to Al(III) and reduction of dissolved Cr(VI) to Cr(III). This finding that the mixing of two ash streams from the same boiler could result in the immobilization of Cr may point at a simple stabilization method. Selective extraction of water soluble, exchangeable and sparingly soluble forms of Cr(VI) was also investigated. Extraction methods were evaluated for their suitability for ash matrixes. It was found that interferences due to the presence of reducing substances in some ash materials may occur.