Unveiling the structural phase transition and magnetic structure of ternary boride PrIr3B2.

We present a comprehensive study of PrIr3B2, which includes a detailed investigation of its crystal and magnetic structure using neutron diffraction. AC and DC magnetization and heat capacity data reveal antiferromagnetic ordering atTN= 10 K. The heat capacity measurements further exhibit a broad peak near 270 K which is related to a structural transition fromP6/mmmtoC2/mseen in low temperature x-ray diffraction and neutron diffraction. High intensity neutron diffraction data confirm the long-range ordering of Pr3+spins, with no apparent magnetic moment on either of the Iridium sites. Two possible magnetic structures with eitherk1= [1,0,0] ork2= [½,½,0] fit nearly equally well the neutron diffraction data. However, based on previous magnetization studies on a single crystalline sample it is argued that the second solution withk2corresponds to the appropriate magnetic structure of PrIr3B2below 10 K. In this magnetic structure, the Pr3+moments are oriented at ∼45° to both theaandbaxes, with thec-axis being the hard axis of magnetization. Overall, our results provide new insights into the magnetic and structural properties of PrIr3B2.

Counting the Acid Sites in a Commercial ZSM-5 Zeolite Catalyst.

This work investigates the acid sites in a commercial ZSM-5 zeolite catalyst by a combination of spectroscopic and physical methods. The Brønsted acid sites in such catalysts are associated with the aluminum substituted into the zeolite lattice, which may not be identical to the total aluminum content of the zeolite. Inelastic neutron scattering spectroscopy (INS) directly quantifies the concentrations of Brønsted acid protons, silanol groups, and hydroxyl groups associated with extra-framework aluminum species. The INS measurements show that ∼50% of the total aluminum content of this particular zeolite is extra framework, a conclusion supported by solid-state NMR and ammonia temperature-programmed desorption (TPD) measurements. Evidence for the presence of extra-framework aluminum oxide species is also seen in neutron powder diffraction data from proton- and deuterium-exchanged samples. The differences between results from the different analytical methods are discussed, and the novelty of direct proton counting by INS in this typical commercial catalyst is emphasized.

Terahertz Faraday Rotation of SrFe12O19 Hexaferrites Enhanced by Nb Doping.

The magneto-optical and dielectric behavior of M-type hexaferrites as permanent magnets in the THz band is essential for potential applications like microwave absorbers and antennas, while are rarely reported in recent years. In this work, single-phase SrFe12-xNbxO19 hexaferrite ceramics were prepared by the conventional solid-state sintering method. Temperature dependence of dielectric parameters was investigated here to determine the relationship between dielectric response and magnetic phase transition. The saturated magnetization increases by nearly 12%, while the coercive field decreases by 30% in the x = 0.03 composition compared to that of the x = 0.00 sample. Besides, the Nb substitution improves the magneto-optical behavior in the THz band by comparing the Faraday rotation parameter from 0.75 (x = 0.00) to 1.30 (x = 0.03). The changes in the magnetic properties are explained by a composition-driven increase of the net magnetic moment and enhanced ferromagnetic exchange coupling. The substitution of the donor dopant Nb on the Fe site is a feasible way to obtain multifunctional M-type hexaferrites as preferred candidates for permanent magnets, sensors, and other electronic devices.

Magnetic Phase Separation in the Oxypnictide Sr2Cr1.85Mn1.15As2O2.

Layered Sr2M3As2O2-type oxypnictides are composed of tetrahedral M2Pn2 and square planar MO2 layers, the building blocks of iron-based and cuprate superconductors. To further expand our understanding of the chemical and magnetic properties of the Sr2Cr3-xMnxAs2O2 solid solution, Sr2Cr2MnAs2O2 has been synthesized. The compound crystallizes in the I4/mmm tetragonal space group with a refined stoichiometry of Sr2Cr1.85Mn1.15As2O2. The M(2) site within the M2Pn2 slab is occupied by 42.7% Cr and 57.3% Mn, and the magnetic moments order antiferromagnetically below TN(M2) = 540 K with a C-type antiferromagnetic structure. The M(1) site within the MO2 layers is fully occupied by Cr, and antiferromagnetic order is observed below TN(M1) = 200 K. Along c, there are two possible interplanar arrangements: ferromagnetic with the (1/2, 1/2, 0) propagation vector and antiferromagnetic with the (1/2, 1/2, 1/2) propagation vector. Magnetic phase separation arises so that both propagation vectors are observed below 200 K. Such magnetic phase separation has not been previously observed in Sr2M3As2O2 phases (M = Cr, Mn) and shows that there are several competing magnetic structures present in these compounds.

Localized Spin Dimers and Structural Distortions in the Hexagonal Perovskite Ba3CaMo2O9.

Extended solid-state materials based on the hexagonal perovskite framework are typified by close competition between localized magnetic interactions and quasi-molecular electronic states. Here, we report the structural and magnetic properties of the new six-layer hexagonal perovskite Ba3CaMo2O9. Neutron diffraction experiments, combined with magnetic susceptibility measurements, show that the Mo2O9 dimers retain localized character down to 5 K and adopt nonmagnetic spin-singlet ground states. This is in contrast to the recently reported Ba3SrMo2O9 analogue, in which the Mo2O9 dimers spontaneously separate into a mixture of localized and quasi-molecular ground states. Structural distortions in both Ba3CaMo2O9 and Ba3SrMo2O9 have been studied with the aid of distortion mode analyses to elucidate the coupling between the crystal lattice and electronic interactions in 6H Mo5+ hexagonal perovskites.

Tuneable magnetic nanocomposites for remote self-healing.

When polymer composites containing magnetic nanoparticles (MNPs) are exposed to an alternating magnetic field, heat is generated to melt the surrounding polymer locally, partially filling voids across any cracks or deformities. Such materials are of interest for structural applications; however, structural polymers with high melting temperatures pose the challenge of generating high localised temperatures enabling self-healing. A method to prepare a multiferroic-Polyamide 6 (PA6) nanocomposite with tuneable magnetocaloric properties is reported. Tunability arises from varying the MNP material (and any coating, its dispersion, and agglomerate sizes in the nanocomposite). The superparamagnetic MNPs (SMNPs) and iron oxide MNPs with and without surface functionalization were dispersed into PA6 through in situ polymerization, and their magnetic properties were compared. Furthermore, computer simulations were used to quantify the dispersion state of MNPs and assess the influence of the interaction radius on the magnetic response of the self-healable magnetic nanoparticle polymer (SHMNP) composite. It was shown that maintaining the low interaction radius through the dispersion of the low coercivity MNPs could allow tuning of the bulk magnetocaloric properties of the resulting mesostructures. An in-situ polymerization method improved the dispersion and reduced the maximum interaction radius value from ca. 806 to 371 nm and increased the magnetic response for the silica-coated SMNP composite. This sample displayed ca. three orders of magnitude enhancement for magnetic saturation compared to the unfunctionalized Fe3O4 MNP composite.

Quantum Spin-1/2 Dimers in a Low-Dimensional Tetrabromocuprate Magnet.

This work describes a homometallic spin- 1 / 2 tetrabromocuprate adopting a bilayer structure. Magnetic-susceptibility measurements show a broad maximum centred near 70 K, with fits to this data using a Heisenberg model consistent with strong antiferromagnetic coupling between neighbouring copper atoms in different layers of the bilayer. There are further weak intralayer ferromagnetic interactions between copper cations in neighbouring dimers. First-principles calculations are consistent with this, but suggest there is only significant magnetic coupling within one direction of a layer; this would suggest the presence of a spin ladder within the bilayer with antiferromagnetic rung and weaker ferromagnetic rail couplings.

Site-Selective d10/d0 Substitution in an S = 1/2 Spin Ladder Ba2CuTe1-xWxO6 (0 ≤ x ≤ 0.3).

Isovalent nonmagnetic d10 and d0 B″ cations have proven to be a powerful tool for tuning the magnetic interactions between magnetic B' cations in A2B'B″O6 double perovskites. Tuning is facilitated by the changes in orbital hybridization that favor different superexchange pathways. This can produce alternative magnetic structures when B″ is d10 or d0. Furthermore, the competition generated by introducing mixtures of d10 and d0 cations can drive the material into the realms of exotic quantum magnetism. Here, Te6+ d10 was substituted by W6+ d0 in the hexagonal perovskite Ba2CuTeO6, which possesses a spin ladder geometry of Cu2+ cations, creating a Ba2CuTe1-xWxO6 solid solution (x = 0-0.3). We find W6+ is almost exclusively substituted for Te6+ on the corner-sharing site within the spin ladder, in preference to the face-sharing site between ladders. The site-selective doping directly tunes the intraladder, Jrung and Jleg, interactions. Modeling the magnetic susceptibility data shows the d0 orbitals modify the relative intraladder interaction strength (Jrung/Jleg) so the system changes from a spin ladder to isolated spin chains as W6+ increases. This further demonstrates the utility of d10 and d0 dopants as a tool for tuning magnetic interactions in a wide range of perovskites and perovskite-derived structures.

Effect of thermal treatment on the stability of Na-Mn-W/SiO2 catalyst for the oxidative coupling of methane.

In this study, we investigate the effect of thermal treatment/calcination on the stability and activity of a Na-Mn-W/SiO2 catalyst for the oxidative coupling of methane. The catalyst performance and characterisation measurements suggest that the W species are directly involved in the catalyst active site responsible for CH4 conversion. Under operating conditions, the active components, present in the form of a Na-W-O-Mn molten state, are highly mobile and volatile. By varying the parameters of the calcination protocol, it was shown that these molten components can be partially stabilised, resulting in a catalyst with lower activity (due to loss of surface area) but higher stability even for long duration OCM reaction experiments.

Elemental composition, heat capacity from 2 to 300 K and derived thermodynamic functions of 5 microorganism species.

Detailed elemental analysis and low-temperature calorimetric measurement results are reported for the first time for Gram-positive bacteria, Gram-negative bacteria and mold fungi. Microorganism unit carbon formulas (empirical formulas) were calculated. Standard molar heat capacity and entropy were found to be C°p,m = 38.200 J/C-mol K and S°m = 31.234 J/C-mol K for Escherichia coli, C°p,m = 54.188 J/C-mol K and S°m = 47.141 J/C-mol K for Gluconobacter oxydans, C°p,m = 31.475 J/C-mol K and S°m = 33.222 J/C-mol K for Pseudomonas fluorescens, C°p,m = 38.118 J/C-mol K and S°m = 37.042 J/C-mol K for Streptococcus thermophilus, and C°p,m = 35.470 J/C-mol K and S°m = 34.393 J/C-mol K for Penicillium chrysogenum. Microorganism heat capacities below 10 K were best described by an expanded Debye-T³ law. Based on the collected data, empirical formulas and entropies per C-mole of the analyzed organisms were determined. The measured heat capacities were compared to predictions of Kopp's rule and Hurst-Harrison equation, both of which were found to be able to give reasonably accurate predictions. The determined entropies were compared to predictions of Battley and Roels models. The Battley model was found to be more accurate. The measured microorganism entropies lay between the values of their principal macromolecular constituents: DNA, and globular and fibrillar proteins. This indicates that self-assembly of the macromolecular components into cellular structures does not lead to decrease in thermal entropy.

Electrolyte/Dye/TiO2 Interfacial Structures of Dye-Sensitized Solar Cells Revealed by In Situ Neutron Reflectometry with Contrast Matching.

The nature of an interfacial structure buried within a device assembly is often critical to its function. For example, the dye/TiO2 interfacial structure that comprises the working electrode of a dye-sensitized solar cell (DSC) governs its photovoltaic output. These structures have been determined outside of the DSC device, using ex situ characterization methods; yet, they really should be probed while held within a DSC since they are modulated by the device environment. Dye/TiO2 structures will be particularly influenced by a layer of electrolyte ions that lies above the dye self-assembly. We show that electrolyte/dye/TiO2 interfacial structures can be resolved using in situ neutron reflectometry with contrast matching. We find that electrolyte constituents ingress into the self-assembled monolayer of dye molecules that anchor onto TiO2. Some dye/TiO2 anchoring configurations are modulated by the formation of electrolyte/dye intermolecular interactions. These electrolyte-influencing structural changes will affect dye-regeneration and electron-injection DSC operational processes. This underpins the importance of this in situ structural determination of electrolyte/dye/TiO2 interfaces within representative DSC device environments.

Electronic and Magnetic Properties of Cation Ordered Sr2Mn2.23Cr0.77As2O2.

Several different mechanisms of magnetoresistance (MR) have been observed in 1111 LnMnAsO1-xFx oxypnictides (Ln = lanthanide) as a result of magnetic coupling between the Mn and Ln. Such phases also exhibit interesting magnetic phase transitions upon cooling. Sr2Mn2CrAs2O2 has been synthesized to investigate if it is possible to observe MR and/or magnetic phase transitions as a result of magnetic coupling between the Mn and Cr. Sr2Mn2CrAs2O2 crystallizes in the tetragonal space group I4/mmm containing alternating MO22- and M'2As22- layers, and neutron diffraction results demonstrate that the actual stoichiometry is Sr2Mn2.23Cr0.77As2O2. Cation order is present between Mn and Cr, with Cr predominantly occupying the square planar MO22- site. Below 410 K, the magnetic moments of the Mn/Cr ions in the M'2As22- sublattice exhibit G-type antiferromagnetic order. The Mn/Cr moments within the MO22- layer order below 167 K with a K2NiF4-type antiferromagnetic structure that simultaneously induces a spin flip of the magnetic moments in the M'2As22- layers from a G-type to a C-type antiferromagnetic arrangement. The results demonstrate that the superexchange interactions are finely balanced in Sr2Mn2.23Cr0.77As2O2. Sr2Mn2.23Cr0.77As2O2 is semiconducting, and there is no evidence of MR.

High-Pressure Study of the Elpasolite Perovskite La2NiMnO6.

Here we report a high-pressure investigation into the structural and magnetic properties of the double perovskite La2NiMnO6 using neutron scattering over a temperature range of 4.2-300 K at ambient pressure and over a temperature range of 120-1177 K up to a maximum pressure of 6.6 GPa. X-ray diffraction was also used up to a maximum pressure of 64 GPa, over a temperature range of 300-720 K. The sample was found to exist in a mixed rhombohedral/monoclinic symmetry at ambient conditions, the balance of which was found to be strongly temperature- and pressure-dependent. Alternating current magnetometry and X-ray absorption near-edge structure measurements were made at ambient pressure to characterize the sample, suggesting that the transition-metal sites exist in a mixed Ni3+/Mn3+ and Ni2+/Mn4+ state at ambient temperature and pressure. Analysis of the magnetic properties of the sample shows that the Curie temperature can be enhanced by ∼12 K with 2 GPa applied pressure, but it is highly stable at pressures beyond this. We report a pressure-volume-temperature equation of state for this material over this combined temperature and pressure range, with an ambient temperature bulk modulus of ∼179(8) GPa. The previously reported transition from monoclinic to rhombohedral symmetry upon heating to 700 K is seen to be encouraged with applied pressure, transforming fully by ∼1.5 GPa. Raman spectroscopy data were collected up to ∼8 GPa and show no clear changes or discontinuities over the reported phase transition to rhombohedral symmetry or any indication of further changes over the range considered. The ambient-pressure Grüneisen parameter γth was determined to be γth = 2.6 with a Debye temperature of 677 K. The individual modal parameters γj at ambient temperature were also determined from the high-pressure Raman data.

Magnetic interactions in the S = 1/2 square-lattice antiferromagnets Ba2CuTeO6 and Ba2CuWO6: parent phases of a possible spin liquid.

The isostructural double perovskites Ba2CuTeO6 and Ba2CuWO6 are shown by theory and experiment to be frustrated square-lattice antiferromagnets with opposing dominant magnetic interactions. This is driven by differences in orbital hybridisation of Te6+ and W6+. A spin-liquid-like ground state is predicted for Ba2Cu(Te1-xWx)O6 solid solution similar to recent observations in Sr2Cu(Te1-xWx)O6.

[Ge(TenBu)4] - a single source precursor for the chemical vapour deposition of germanium telluride thin films.

Reaction of activated germanium with nBu2Te2 in THF solution was shown to be more effective for the preparation of the germanium(iv) tellurolate compound, [Ge(TenBu)4], than reaction of GeCl4 with LiTenBu in a 1 : 4 molar ratio in THF. The product was characterised by 1H, 13C{1H} NMR spectroscopy and microanalysis and evaluated as a single source precursor for the low pressure chemical vapour deposition of GeTe thin films. Depending upon deposition conditions, either dull grey films (predominantly elemental Te) or highly reflective (GeTe) films were obtained from the pure precursor. Grazing incidence X-ray diffraction shows that the highly reflective films are comprised of the rhombohedral α-GeTe phase, while scanning electron microscopy and energy dispersive X-ray analysis reveal rhomb-shaped crystallites with a 49(1) : 51(1)% Ge : Te ratio. This structure is also confirmed from Raman spectra. Van der Pauw measurements show ρ = 3.2(1) × 10-4 Ω cm and Hall electrical measurements indicate that the GeTe thin films are p-type, with a mobility of 8.4(7) cm2 V-1 s-1 and carrier concentration of 2.5(2) × 1021 cm-3. The high p-type concentration is most likely a result of the substantial Ge vacancies in its sub-lattice, in line with the EDX elemental ratios.

Tin(iv) chalcogenoether complexes as single source precursors for the chemical vapour deposition of SnE2 and SnE (E = S, Se) thin films.

The molecular Sn(iv) complexes, [SnCl4{nBuS(CH2)3SnBu}] (2), [SnCl4(nBu2S)2] (3) and [SnCl4(nBu2Se)2] (4) have been prepared in good yield from reaction of SnCl4 with the appropriate chalcogenoether ligand in anhydrous hexane and, together with the known [SnCl4{nBuSe(CH2)3SenBu}] (1), employed as single source precursors for the low pressure chemical vapour deposition of the corresponding tin dichalcogenide thin films. At elevated temperatures the bidentate ligand precursors, (1) and (2), also form the tin monochalcogenides, SnSe and SnS, respectively. In contrast, (3) gave a mixture of phases, SnS2, Sn2S3 and SnS and (4) gave SnSe2 only. The morphologies, elemental compositions and crystal structures of the resulting films have been determined by scanning electron microscopy, energy dispersive X-ray spectroscopy, grazing incidence X-ray diffraction and Raman spectroscopy. Van der Pauw measurements on the SnS2, SnS and SnSe2 films confirm their resistivities to be 2.9(9), 266(3) and 4.4(3) Ω cm, respectively.

Investigation of the role of morphology on the magnetic properties of Ca2Mn3O8 materials.

Ca2Mn3O8 exhibits a complex layered structure comprised of Mn3O84- layers separated by Ca2+ ions. In contrast with the more traditional triangular delafossite layered materials the Mn3O84- layers additionally exhibit an ordered vacancy, which forms a 'bow-tie' like arrangement of the Mn4+ ions. We report a comprehensive study of the magnetic properties of a series of Ca2Mn3O8 materials with different morphologies. EXAFS and XANES analysis confirm no differences in either manganese environment or oxidation state between materials. Apparent differences in magnetic order from SQUID magnetometry can be rationalised by uncompensated surface spins arising as a result of changes to the surface to volume ratio between morphologies. Furthermore, these data suggest these materials are potentially frustrated in nature, due to the triangular connectivity of Mn4+ spins, with a simple 'spin-up/spin-down' (↑↓) antiferromagnetic model unable to explain the data collected.

Layered Double Hydroxide Nanoclusters: Aqueous, Concentrated, Stable, and Catalytically Active Colloids toward Green Chemistry.

Increasing attention has been dedicated to the development of nanomaterials rendering green and sustainable processes, which occur in benign aqueous reaction media. Herein, we demonstrate the synthesis of another family of green nanomaterials, layered double hydroxide (LDH) nanoclusters, which are concentrated (98.7 g/L in aqueous solvent), stably dispersed (transparent sol for >2 weeks), and catalytically active colloids of nano LDHs (isotropic shape with the size of 7.8 nm as determined by small-angle X-ray scattering). LDH nanoclusters are available as colloidal building blocks to give access to meso- and macroporous LDH materials. Proof-of-concept applications revealed that the LDH nanocluster works as a solid basic catalyst and is separable from solvents of catalytic reactions, confirming the nature of nanocatalysts. The present work closely investigates the unique physical and chemical features of this colloid, the formation mechanism, and the ability to act as basic nanocatalysts in benign aqueous reaction systems.

PZT-like structural phase transitions in the BiFeO3-KNbO3 solid solution.

Despite the high prominence of the perovskites BiFeO(3) and KNbO(3) the solid solution between the two has received little attention. We report a detailed neutron and synchrotron X-ray powder diffraction, and Raman spectroscopy study which demonstrates an R3c→P4mm→Amm2 series of structural phase transitions similar to that exhibited by the PbZrO(3)-PbTiO(3) solid solution.

Magnetic control of a meta-molecule.

Metamaterials offer the prospect of new science and applications. They have been designed by shaping or changing the material of the individual meta-molecules to achieve properties not naturally attainable. Composite meta-molecules incorporating a magnetic component offer new opportunities. In this work we report on the interaction between a non-magnetic split ring resonator (SRR) and a thin film of yttrium iron garnet (YIG). Strong hybridized resonances are observed. While the SRR is characterized by a magnetic and electric resonance, in practice, it is found that the YIG couples strongly to this symmetric (electric) mode of the SRR. It is also demonstrated that the anti-crossing region provides fertile ground for the creation of elementary excitations such as backward volume magnetostatic waves.