[Imaging in joint-preserving hip surgery]. / Bildgebung in der gelenkerhaltenden Hüftchirurgie.

Instability and impingement of the hip are the main pathomechanisms that can lead to chondrolabral damage, painful restriction of motion and early hip osteoarthritis due to increased mechanical stress, even in young patients. The goals of joint-preserving hip surgery are correction of the osseous deformities and chondrolabral damage as well as restoration of joint function. A prerequisite for successful surgery is the identification of the underlying hip pathologies, which can also occur in combination. Dedicated radiographic and magnetic resonance (MR) imaging of osseous morphology and the internal degenerative joint lesions play an essential role for the treatment indications and surgical treatment planning. This article provides a concise overview of the prevalence, pathomechanisms and indicated treatment of hip deformities as well as detailed recommendations on the specific radiological clarification.

Femoral cartilage damage occurs at the zone of femoral head necrosis and can be accurately detected on traction MR arthrography of the hip in patients undergoing joint preserving hip surgery.

The primary purpose was to answer the following question: What is the location and pattern of necrosis and associated chondrolabral lesions and can they be accurately detected on traction MR arthrography compared with intra-operative findings in patients undergoing hip preservation surgery for femoral head necrosis (FHN)? Retrospective, diagnostic case series on 23 patients (23 hips; mean age 29 ± 6 years) with diagnosis of FHN undergoing open/arthroscopic joint preserving surgery for FHN and pre-operative traction MR arthrography of the hip. A MR-compatible device for weight-adapted application of leg traction (15-23 kg) was used and coronal, sagittal and radial images were acquired. Location and pattern of necrosis and chondrolabral lesions was assessed by two readers and compared with intra-operative findings to calculate diagnostic accuracy of traction MR arthrography. On MRI all 23 (100%) hips showed central FHN, most frequently antero-superiorly (22/23, 96%) where a high prevalence of femoral cartilage damage was detected (18/23, 78%), with delamination being the most common (16/23, 70%) damage pattern. Intra-operative inspection showed central femoral head cartilage damage most frequently located antero-superiorly (18/23, 78%) with femoral cartilage delamination being most common (14/23, 61%). Traction MR arthrography enabled detection of femoral cartilage damage with a sensitivity/specificity of 95%/75% for reader 1 and 89%/75% for reader 2. To conclude, femoral cartilage damage occurs at the zone of necrosis and can be accurately detected using traction MR arthrography of the hip which may be helpful for surgical decision making in young patients with FHN.

[The modified Dunn procedure to treat severe slipped capital femoral epiphysis]. / Die modifizierte Dunn-Operation zur Behandlung der schweren Epiphyseolysis capitis femoris.

The modified Dunn procedure enables restoration of the proximal femoral anatomy and normal hip function in patients with slipped capital femoral epiphysis (SCFE). Surgery is indicated in severe SCFE and in hips with a moderate slip angle and impaired function. To prevent further dislocation of the femoral head, the authors recommend non-weightbearing until surgery, since an accurate evaluation of slip stability is not possible in the clinical setting. Only a well-trained orthopedic surgeon with a high level of expertise in hip preservation surgery should perform this procedure. Precise knowledge of the vascular anatomy of the proximal femur is essential to perform successful surgery with low rates of complications such as avascular necrosis of the femoral head. Surgical hip dislocation with osteotomy of the greater trochanter is the approach used. After arthrotomy, stability of the physis is checked. To prevent rupture of the retinacular vessels in hips with an unstable physis, these heads are prophylactically pinned before dislocation out of the socket. Blood supply to the femoral head as well as intraarticular damage can be judged in the dislocated position of the femoral head. The retinacular flap preserves epiphyseal perfusion while the femoral head is dislocated from the femoral neck. Resection of posteromedial callous formation from the femoral neck as well as removal of the remaining physis from the femoral head prevent stress on the retinacular vessels after reduction of the femoral head (epiphysis) on the neck.

Patients with severe slipped capital femoral epiphysis treated by the modified Dunn procedure have low rates of avascular necrosis, good outcomes, and little osteoarthritis at long-term follow-up.

AIMS: The modified Dunn procedure has the potential to restore the anatomy in hips with severe slipped capital femoral epiphyses (SCFE). However, there is a risk of developing avascular necrosis of the femoral head (AVN). In this paper, we report on clinical outcome, radiological outcome, AVN rate and complications, and the cumulative survivorship at long-term follow-up in patients undergoing the modified Dunn procedure for severe SCFE. PATIENTS AND METHODS: We performed a retrospective analysis involving 46 hips in 46 patients treated with a modified Dunn procedure for severe SCFE (slip angle > 60°) between 1999 and 2016. At nine-year-follow-up, 40 hips were available for clinical and radiological examination. Mean preoperative age was 13 years, and 14 hips (30%) presented with unstable slips. Mean preoperative slip angle was 64°. Kaplan-Meier survivorship was calculated. RESULTS: At the latest follow-up, the mean Merle d'Aubigné and Postel score was 17 points (14 to 18), mean modified Harris Hip Score was 94 points (66 to 100), and mean Hip Disability and Osteoarthritis Outcome Score was 91 points (67 to 100). Postoperative slip angle was 7° (1° to 16°). One hip (2%) had progression of osteoarthritis (OA). Two hips (5%) developed AVN of the femoral head and required further surgery. Three other hips (7%) underwent implant revision due to screw breakage or change of wires. Cumulative survivorship was 86% at ten-year follow-up. CONCLUSION: The modified Dunn procedure for severe SCFE resulted in a low rate of AVN, low risk of progression to OA, and high functional scores at long-term follow-up. The slip deformities were mainly corrected but secondary impingement deformities can develop in some hips and may require further surgical treatment. Cite this article: Bone Joint J 2019;101-B:403-414.

Femoral osteochondroplasty can be performed effectively without the risk of avascular necrosis or femoral neck fractures in an experimental ovine FAI model.

OBJECTIVE: The experimental induction of cam-type femoroacetabular impingement (FAI) in sheep is established. To tap the full potential of this ovine model, one should be able to perform a femoral osteochondroplasty safely. This study was based on previous cadaver experiments on the blood supply to the ovine femoral head and on the biomechanical strength of the proximal femur following offset creation. We hypothesized that offset creation in this ovine FAI model does not lead to (1) avascular necrosis (AVN) of the ovine femoral head or (2) iatrogenic femoral neck fractures and (3) can be performed effectively. DESIGN: In this experimental, controlled, prospective study nine sheep underwent unilateral FAI induction through an intertrochanteric, varus osteotomy. Seventy days following FAI induction, femoral osteochondroplasty was performed. Sheep were sacrificed after another 140 days. Radiographs, computed tomography (CT) scans and MRI were acquired. Histologic samples were stained with hematoxylin-eosin. (1) The multimodal Association Research Circulation Osseous (ARCO) classification was used for assessment of AVN. (2) Femoral neck fractures were assessed with the multimodal imaging approach. (3) Pre- and postoperative (=after sacrifice) alpha angles and femoral neck diameters were compared. RESULTS: (1) No signs for AVN according to the ARCO classification or (2) for femoral neck fractures were detected. (3) Mean alpha angles and femoral neck diameters decreased significantly (p < 0.001) superiorly by at least 30° respectively 4 mm after the offset creation. CONCLUSIONS: Femoral osteochondroplasty can be performed effectively and without the risk of AVN or femoral neck fractures in this ovine FAI model.

[Bernese periacetabular osteotomy. : Indications, technique and results 30 years after the first description]. / Periazetabuläre Osteotomie nach Ganz : Indikationen, Technik und Ergebnisse 30 Jahre nach Erstbeschreibung.

The Bernese periacetabular osteotomy (PAO) is a surgical technique for the treatment of (1) hip dysplasia and (2) femoroacetabular impingement due to acetabular retroversion. The aim of the surgery is to prevent secondary osteoarthritis by improvement of the hip biomechanics. In contrast to other pelvic osteotomies, the posterior column remains intact with this technique. This improves the inherent stability of the acetabular fragment and thereby facilitates postoperative rehabilitation. The birth canal remains unchanged. Through a shortened ilioinguinal incision, four osteotomies and one controlled fracture around the acetabulum are performed. The direction of acetabular reorientation differs for both indications while the sequence of the osteotomies remains the same. This surgical approach allows for a concomitant osteochondroplasty in the case of an aspherical femoral head-neck junction. The complication rate is relatively low despite the complexity of the procedure. The key point for a successful long term outcome is an optimal reorientation of the acetabulum for both indications. With an optimal reorientation and a spherical femoral head, the cumulative survivorship of the hip after 10 years is 80-90 %. For the very first 75 patients, the cumulative 20-year survivorship was 60 %. The preliminary evaluation of the same series at a 30-year follow-up still showed a survivorship of approximately 30 %. The PAO has become the standard procedure for the surgical therapy of hip dysplasia in adolescents and adults.

Size and shape of the lunate surface in different types of pincer impingement: theoretical implications for surgical therapy.

OBJECTIVE: Acetabular rim trimming is indicated in pincer hips with an oversized lunate surface but could result in a critically decreased size of the lunate surface in pincer hips with acetabular malorientation. There is a lack of detailed three-dimensional anatomy of lunate surface in pincer hips. Therefore, we questioned how does (1) size and (2) shape of the lunate surface differ among hips with different types of pincer impingement? METHOD: We retrospectively compared size and shape of the lunate surface between acetabular retroversion (48 hips), deep acetabulum (34 hips), protrusio acetabuli (seven hips), normal acetabuli (30 hips), and hip dysplasia (45 hips). Using magnetic resonance imaging (MRI) arthrography with radial slices we measured size in percentage of the femoral head coverage and shape using the outer (inner) center-edge angles and width of lunate surface. RESULTS: Hips with retroversion had a decreased size and deep hips had normal size of the lunate surface. Both had a normal shape of the outer acetabular rim. Protrusio hips had an increased size and a prominent outer acetabular rim. In all three types of pincer hips the acetabular fossa was increased. CONCLUSION: Size and shape of the lunate surface differs substantially among different types of pincer impingement. In contrast to hips with protrusio acetabuli, retroverted and deep hips do not have an increased size of the lunate surface. Acetabular rim trimming in retroverted and deep hips should be performed with caution. Based on our results, acetabular reorientation would theoretically be the treatment of choice in retroverted hips.

Validation of a statistical shape model-based 2D/3D reconstruction method for determination of cup orientation after THA.

PURPOSE: The aim of this study was to validate the accuracy and reproducibility of a statistical shape model-based 2D/3D reconstruction method for determining cup orientation after total hip arthroplasty. With a statistical shape model, this method allows reconstructing a patient-specific 3D-model of the pelvis from a standard AP X-ray radiograph. Cup orientation (inclination and anteversion) is then calculated with respect to the anterior pelvic plane that is derived from the reconstructed model. MATERIALS AND METHODS: The validation study was conducted retrospectively on datasets of 29 patients (31 hips). Among them, there were 15 men (15 hips) and 14 women (16 hips). The average age of the patients was 69.4±8.5 (49-82) years. Each dataset has one postoperative X-ray radiograph and one postoperative CT scan. The postoperative CT scan for each patient was used to establish the ground truth for the cup orientation. The cup anteversion and inclination that were calculated from the 2D/3D reconstruction method were compared to the associated ground truth. To validate reproducibility and reliability, two observers performed measurements for each dataset twice in order to measure the reproducibility and the reliability of the 2D/3D reconstruction method. RESULTS: Our validation study demonstrated a mean accuracy of 0.4 ± 1.8° (-2.6° to 3.3°) for inclination and a mean accuracy of 0.6±1.5° (-2.0° to 3.9°) for anteversion. Through the Bland-Altman analysis, no systematic errors in accuracy were detected. The method showed very good consistency for both parameters. CONCLUSIONS: Our validation results demonstrate that the statistical shape model-based 2D/3D reconstruction-based method is an accurate, consistent, and reproducible technique to measure cup orientation from postoperative X-ray radiographs. The best results were achieved with radiographs including the bilateral anterior superior iliac spines and the cranial part of non-fractured pelvises.

The iliocapsularis muscle: an important stabilizer in the dysplastic hip.

BACKGROUND: The iliocapsularis muscle is a little known muscle overlying the anterior hip capsule postulated to function as a stabilizer of dysplastic hips. Theoretically, this muscle would be hypertrophied in dysplastic hips and, conversely, atrophied in stable and well-constrained hips. However, these observations have not been confirmed and the true function of this muscle remains unknown. QUESTIONS/PURPOSES: We quantified the anatomic dimensions and degree of fatty infiltration of the iliocapsularis muscle and compared the results for 45 hips with deficient acetabular coverage (Group I) with 40 hips with excessive acetabular coverage (Group II). PATIENTS AND METHODS: We used MR arthrography to evaluate anatomic dimensions (thickness, width, circumference, cross-sectional area [CSA], and partial volume) and the amount of fatty infiltration. RESULTS: We observed increased thickness, width, circumference, CSA, and partial volume of the iliocapsularis muscle in Group I when compared with Group II. Additionally, hips in Group I had a lower prevalence of fatty infiltration compared with those in Group II. The iliocapsularis muscle typically was hypertrophied, and there was less fatty infiltration in dysplastic hips compared with hips with excessive acetabular coverage. CONCLUSION: These observations suggest the iliocapsularis muscle is important for stabilizing the femoral head in a deficient acetabulum. This muscle serves as an anatomic landmark when performing a periacetabular osteotomy. Additionally, preoperative evaluation of morphologic features of the muscle can be used as an adjunct for decision making when treating patients with borderline hip dysplasia or femoroacetabular impingement.

Femoral morphology differs between deficient and excessive acetabular coverage.

UNLABELLED: Structural deformities of the femoral head occurring during skeletal development (eg, Legg-Calvé-Perthes disease) are associated with individual shapes of the acetabulum but it is unclear whether differences in acetabular shape are associated with differences in proximal femoral shape. We questioned whether the amount of acetabular coverage influences femoral morphology. We retrospectively compared the proximal femoral anatomy of 50 selected patients (50 hips) with developmental dysplasia of the hip (lateral center-edge angle [LCE] < or = 25 degrees ; acetabular index > or = 14 degrees ) with 45 selected patients (50 hips) with a deep acetabulum (LCE > or = 39 degrees ). Using MRI arthrography we measured head sphericity, epiphyseal shape, epiphyseal extension, and femoral head-neck offset. A deep acetabulum was associated with a more spherical head shape, increased epiphyseal height with a pronounced extension of the epiphysis towards the femoral neck, and an increased offset. In contrast, dysplastic hips showed an elliptical femoral head, decreased epiphyseal height with a less pronounced extension of the epiphysis, and decreased head-neck offset. Hips with different acetabular coverage are associated with different proximal femoral anatomy. A nonspherical head in dysplastic hips could lead to joint incongruity after an acetabular reorientation procedure. LEVEL OF EVIDENCE: Level IV, retrospective comparative study. See the Guidelines for Authors for a complete description of levels of evidence.