Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 7 de 7
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
Adv Mater ; 32(12): e1907812, 2020 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-32064674

RESUMO

Perovskite nanostructures have attracted much attention in recent years due to their suitability for a variety of applications such as photovoltaics, light-emitting diodes (LEDs), nanometer-size lasing, and more. These uses rely on the conductive properties of these nanostructures. However, electrical characterization of individual, thin perovskite nanowires has not yet been reported. Here, conductive atomic force microscopy characterization of individual cesium lead halide nanowires is presented. Clear differences are observed in the conductivity of nanowires containing only bromide and nanowires containing a mixture of bromide and iodide. The differences are attributed to a higher density of crystalline defects, deeper trap states, and higher inherent conductivity for nanowires with mixed bromide-iodide content.

2.
Adv Mater ; 30(41): e1706984, 2018 Oct.
Artigo em Inglês | MEDLINE | ID: mdl-29984432

RESUMO

Charge transport through molecular structures is interesting both scientifically and technologically. To date, DNA is the only type of polymer that transports significant currents over distances of more than a few nanometers in individual molecules. For molecular electronics, DNA derivatives are by far more promising than native DNA due to their improved charge-transport properties. Here, the synthesis of several unique DNA derivatives along with electrical characterization and theoretical models is surveyed. The derivatives include double stranded poly(G)-poly(C) DNA molecules, four stranded G4-DNA, metal-DNA hybrid molecular wires, and other DNA molecules that are modified either at the bases or at the backbone. The electrical characteristics of these nanostructures, studied experimentally by electrostatic force microscopy, conductive atomic force microscopy, and scanning tunneling microscopy and spectroscopy, are reviewed.


Assuntos
DNA/química , DNA/síntese química , Equipamentos e Provisões Elétricas , Metais/síntese química , Metais/química
3.
Adv Mater ; 30(26): e1800433, 2018 Jun.
Artigo em Inglês | MEDLINE | ID: mdl-29726045

RESUMO

Over the past decades, DNA, the carrier of genetic information, has been used by researchers as a structural template material. Watson-Crick base pairing enables the formation of complex 2D and 3D structures from DNA through self-assembly. Various methods have been developed to functionalize these structures for numerous utilities. Metallization of DNA has attracted much attention as a means of forming conductive nanostructures. Nevertheless, most of the metallized DNA wires reported so far suffer from irregularity and lack of end-to-end electrical connectivity. An effective technique for formation of thin gold-coated DNA wires that overcomes these drawbacks is developed and presented here. A conductive atomic force microscopy setup, which is suitable for measuring tens to thousands of nanometer long molecules and wires, is used to characterize these DNA-based nanowires. The wires reported here are the narrowest gold-coated DNA wires that display long-range conductivity. The measurements presented show that the conductivity is limited by defects, and that thicker gold coating reduces the number of defects and increases the conductive length. This preparation method enables the formation of molecular wires with dimensions and uniformity that are much more suitable for DNA-based molecular electronics.


Assuntos
Nanofios , DNA , Ouro , Microscopia de Força Atômica , Nanoestruturas
4.
Nano Lett ; 17(2): 1007-1013, 2017 02 08.
Artigo em Inglês | MEDLINE | ID: mdl-28094960

RESUMO

Perovskite nanostructures, both hybrid organo-metal and fully inorganic perovskites, have gained a lot of interest in the past few years for their intriguing optical properties in the visible region. We report on inorganic cesium lead bromide (CsPbBr3) nanowires (NWs) having quantum confined dimensions corresponding to 5 unit cells. The addition of various hydrohalic acids (HX, X = Cl, Br, I) was found to highly affect the NW length, composition, and optical properties. Hydrochloric (HCl) and hydroiodic (HI) acids mixed in the reaction solution influence the crystal structure and optical properties and shorten the NWs, while the hydrobromic acid (HBr) addition results solely in shorter NWs, without any structural change. The addition of HX increases the acidity of the reaction solution, resulting in protonation of the oleylamine ligands from oleylamine into oleyl-ammonium cations that behave similarly to Cs+ during crystallization. Therefore, the positions of the Cs+ at the growing surface of the NWs are taken by the oleyl-ammonium cations, thus blocking further growth in the favored direction. The emission of the NWs is tunable between ∼423-505 nm and possesses a potential in the optoelectronic field. Moreover, electrical conductivity measurements of the NWs are discussed to give a new point of view regarding the conductivity of perovskite nanostructures.

5.
Nat Commun ; 7: 13482, 2016 11 17.
Artigo em Inglês | MEDLINE | ID: mdl-27853136

RESUMO

Mimicking the multifunctional bacterial type IV pili (T4Ps) nanofibres provides an important avenue towards the development of new functional nanostructured biomaterials. Yet, the development of T4Ps-based applications is limited by the inability to form these nanofibres in vitro from their pilin monomers. Here, to overcome this limitation, we followed a reductionist approach and designed a self-assembling pilin-based 20-mer peptide, derived from the presumably bioelectronic pilin of Geobacter sulfurreducens. The designed 20-mer, which spans sequences from both the polymerization domain and the functionality region of the pilin, self-assembled into ordered nanofibres. Investigation of the 20-mer revealed that shorter sequences which correspond to the polymerization domain form a supramolecular ß-sheet, contrary to their helical configuration in the native T4P core, due to alternative molecular recognition. In contrast, the sequence derived from the functionality region maintains a native-like, helical conformation. This study presents a new family of self-assembling peptides which form T4P-like nanostructures.


Assuntos
Fímbrias Bacterianas/química , Geobacter/fisiologia , Nanofibras/química , Peptídeos/química , Cristalografia por Raios X
6.
Nat Nanotechnol ; 9(12): 1040-6, 2014 Dec.
Artigo em Inglês | MEDLINE | ID: mdl-25344689

RESUMO

DNA and DNA-based polymers are of interest in molecular electronics because of their versatile and programmable structures. However, transport measurements have produced a range of seemingly contradictory results due to differences in the measured molecules and experimental set-ups, and transporting significant current through individual DNA-based molecules remains a considerable challenge. Here, we report reproducible charge transport in guanine-quadruplex (G4) DNA molecules adsorbed on a mica substrate. Currents ranging from tens of picoamperes to more than 100 pA were measured in the G4-DNA over distances ranging from tens of nanometres to more than 100 nm. Our experimental results, combined with theoretical modelling, suggest that transport occurs via a thermally activated long-range hopping between multi-tetrad segments of DNA. These results could re-ignite interest in DNA-based wires and devices, and in the use of such systems in the development of programmable circuits.


Assuntos
Silicatos de Alumínio , DNA/química , Condutividade Elétrica , Nanofios/química
7.
J Phys Condens Matter ; 24(16): 164203, 2012 Apr 25.
Artigo em Inglês | MEDLINE | ID: mdl-22465965

RESUMO

Verification by imaging of the structure of 3D DNA constructs, both bare and conjugated to metal nanoparticles, is challenging. We demonstrate here two transmission electron microscopy (TEM) based methods to distinguish between fully formed tetrahedra, synthesized from DNA conjugated with gold nanoparticles (GNPs) at their vertices, and structures which are only partially formed. When deposited on a surface, fully formed tetrahedra are expected to retain their 3D pyramidal structure, while partially formed structures are expected to form a 2D structure. The first method by which 3D and 2D structures were distinguished was imaging them at different defocusing values. While for 2D structures all the four GNPs acquire Fresnel fringes at the same defocusing value, for 3D structures at least one particle is at a different plane with respect to the others, and so it acquires Fresnel fringes at a different defocusing value. The second method we show is imaging of the structures at different angles. While a single TEM image gives only a 2D projection of the structure, by combining information achieved from imaging at several tilting angles one may verify the structural construct.


Assuntos
DNA/química , Ouro/química , Imageamento Tridimensional/métodos , Nanopartículas Metálicas/química , Sequência de Bases , DNA/genética , Modelos Moleculares , Conformação Molecular , Dados de Sequência Molecular
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...