Analysis of abutment teeth in partially edentulous patients.

The aim of the study was to examine changes in the position of the abutment teeth (AT), size of undercuts for a denture clasp, as well as an existence of an adequate preparation of abutment teeth. A total of 156 casts of partially edentulous jaws, with 460 AT, were analyzed. The size of undercuts, a degree of abutment rotation, inclination and migration were measured using a dental parallelometer. The abutment teeth position was related to the level of occlusal plane in a dental articulator. Furthermore, the existence of an adequate preparation of abutment teeth, as well as a type of a denture and a type of a denture retention element were also considered. Analysis were carried out twice on casts made from a hard stone, the first time before the denture treatment had begun and the second time on the new casts obtained after new dentures had been delivered. The first analysis (prior dental treatment) revealed that a total of 33.9% of the analyzed AT were rotated, 31.3% were inclined, 12.1% had migrated, and 57.3% were elongated above the occlusal plane. On the casts obtained after the new dentures had been made, it was observed that none of the AT had an adequate preparation. Only 37.6% of all retention elements were located in adequate undercut positions on the AT. Upon the results of the present study a conclusion can be established that many abutment teeth are rotated, elongated, inclined, and migrated, which point to a requirement for AT preparation prior the manufacture of new denture; however none of the AT was adequately prepared considering insertion plane and many denture elements were located in an inadequate undercut size.

Oral health related quality of life in Slovenian patients with craniomandibular disorders.

Sixty eight consecutive Slovenian patients with craniomandibular disorders (CMD) participated as the study group and another 400 adults from the regional population sample participated as the control group. The aim was to determine the impact of craniomandibular disorders to the self-perceived oral health related quality of life (OHRQoL) and to compare the OHRQoL with a control group. The mean Oral Health Impact Profile (OHIP) summary scores were computed for all patients with the same diagnosis and for the same subgroups of the axis I according to the RDC/TMD exam protocol. The mean OHIP subscores for the seven domains of the OHIP questionnaire were compared between the study and the control group. Significantly higher OHIP summary scores and all the OHIP subscores were obtained in the CMD patients in comparison with the control group (p<0.05). Furthermore, in the CMD group, patients with two related diagnoses had significantly higher impaired OHRQoL than patients with a single one. The results revealed: 1. The CMD subjects are highly associated with the reduced OHRQoL, 2. Higher number of diagnoses of the axis I according to the RDC/TMD results in the more impaired OHRQoL, 3. The higher age of the patients revealed the more impaired OHRQoL.

Relations between anterior permanent teeth, dental arches and hard palate.

The width and length of the anterior teeth, the dimensions of the frontal dental arches and the dimensions of the hard palate were measured (24 men and 56 women, age range of 18-30 years). The results showed gender-related dimorphism only for the cervical width of the maxillary canine, which were wider in men, p < 0.05. The width-to-length ratios of the maxillary frontal teeth varied from 0.82 to 0.91. The tooth-to-tooth width ratios among different maxillary frontal teeth varied from 0.78 to 0.91. The sum of all anterior maxillary teeth widths was equal to the hamular width and to the distal maxillary arch width (p > 0.05), meaning that the sum of the frontal artificial teeth width may be selected upon the measurement of the hamular width on the hard palate. The ratios between the maxillary and the mandibular frontal dental arch dimensions are representative values for the skeletal class I.

Thickness of masticatory mucosa in the human hard palate and tuberosity dependent on gender and body mass index.

The aim of this study was to clinically determine the thickness of masticatory mucosa in the hard palate and tuberosity as potential donor sites for subepitelial grafts for ridge augmentation procedures of small and moderate alveolar ridge defects to improve aesthetics of a pontic area of fixed partial dentures. In 102 periodontally healthy fully dentate subjects the thickness of mucosa was assessed by bone sounding with a periodontal probe. Twenty measurement points were defined, 18 on hard palate located on 3 lines running at different distances parallel to gingival margin and 2 on tuberosity. Data were analysed to determine differences between gender and different body mass index using t-test. The mucosa on the hard palate was significantly thicker than on the tuberosity. The thickest mucosa was registered on the second and the third line behind canines and on all 3 lines behind the first premolar. These areas are recommended as potential donor sites. Males had significantly thicker mucosa than females (p < 0.01), except for the sites behind the first molar (p > 0.05) where the mucosa was the thinnest in the both gender, which was attributed to the protuberance of the palatal root of the first molar. The same was with the body mass index. Therefore canine-premolar palatal region is recommended for harvesting free subepitelial grafts for moderate augmentation of alveolar ridges for achieving optimal aesthetics of the pontic area.

Use of digital photographs for artificial tooth selection.

Digital photography has become available to everybody. The aim of this study was to examine possibility of calculating the width of a missing central incisor using digital photographs. Digital photographs were obtained from 51 dentate subjects using a 3.1 Megapixel digital camera from various distances: 35 cm, 70 cm, 1 m and 1.5 m. For the calculation of the width of maxillary left central incisor (MLI), the following equation was used: MLI(calculated) = Photographic width of MLI x IPD / photographic IPD. Statistical analysis was made (Kolmogorov-Smirnov test, dependent sample t-test, correlation and frequencies) using SPSS 10.0 for Windows. Results revealed no significant difference between the calculated MLI (70 cm, 1 m and 1.5 m distance) and actual MLI, however calculated MLI from 35 cm distance was significantly different from the actual MLI value (p < 0.01). The highest correlation was between calculated MLI (70 cm distance) and actual MLI. However, the highest percentage of results from a distance of 70 cm also fitted within +/- 0.3 mm; +/- 0.5 mm and +/- 1 mm difference from the actual MLI values. However, the results obtained from 1 m distance were also satisfactory. The technique of use of digital photography is of proven value in calculating the width of a maxillary central incisor. The photographs using a simple digital camera should be taken from a distance from 70 cm to 1 m. Saving such photographs in a dental office may eventually be helpful for calculating dimensions of artificial teeth.

Factors related to patient satisfaction with complete denture therapy.

BACKGROUND: Except for denture quality, many other factors are related to a patient's satisfaction with complete dentures (CDs). METHODS: A total of 222 patients with CDs took a part in this study. A questionnaire divided into 3 parts was completed by both the patients and the dentist, independently. The patients rated their dentures using a scale ranging from 1 to 5 (1 = dissatisfaction to 5 = excellent), and a dentist rated the quality of the denture and the denture-bearing area. RESULTS: Patients were mostly satisfied with the quality of their CDs. Only 7.2% of the patients were absolutely not satisfied with their dentures. Patients with a low level of education were more satisfied in general with their aesthetic appearance. Patients with better self-perception of their affective status and quality of life showed higher levels of general satisfaction. Patients with better self-perception of their economic status showed lower levels of satisfaction. Younger patients wearing dentures for the first time, with short periods of being edentulous, and with better quality maxillary denture-bearing areas were more satisfied with the retention of maxillary CDs. In contrast, younger patients with first-time dentures, a short period of being edentulous, and with better quality mandibular denture-bearing areas gave lower ratings to the retention and comfort of wearing mandibular dentures. CONCLUSIONS: Level of education, self-perception of affective and economic status, and quality of life are all related to patient satisfaction. However, the quality of dentures shows the strongest correlation with patient satisfaction. Not only the quality of the denture-bearing area but the denture-wearing experience itself seems to be more important in determining patient satisfaction with mandibular CDs.

Influence of body mass index and the time of edentulousness on the residual alveolar ridge resorption in complete denture wearers.

Alveolar bone loss (RRR) is a continuous process following tooth extraction, more pronounced during the first few months after the tooth extraction than later. The RRR in the mandible is twice that of the maxilla during a 1-year period and the mandibular: maxillary resorption ratio increases further to 4:1. So far, the etiology of RRR has not been elucidated. It has been speculated that both systemic and local factors contribute. The aim of this study was to analyse the rate of RRR in five different regions of both jaws on lateral cephalograms of 100 complete denture wearers during a one-year period and to compare the rate of RRR between patients being edentulous over a different period of time and between patients with different body mass index. The height of residual ridges was measured on 5 different sites at the delivery of the dentures and a year later using a calibrated grid. The results revealed significant RRR in a one year period. Body mass index had no significant influence on the rate of RRR on any of the five examined sites of the maxilla or the mandible (p > 0.05), while the period of edentulousness had a significantly higher rate of resorption in first 3 sites of measurement (anteriorly) in patients being edentulous less than 1 year than in patients being edentulous for 1-10 years or for over 10 years (ANOVA, p < 0.05).

In vitro release of metal ions from a gold-platinum alloy in saliva-simulated conditions.

The aim of this study was to evaluate the behavior of high-noble gold-platinum alloy samples (18 + 8 Rafinerija plemenitih kovina, Zagreb, Hrvatska), in a phosphate buffer pH 6.0. The aim of the study was to determine the type and amount of released metal ions from the alloy, and to evaluate how the time of exposure to the phosphate buffer pH 6.0 influences the release of metal ions from the alloy. Manufacturer samples 8.0 x 6.5 x 1.0 mm in size, with a surface area of 133 mm2 were used. The release of metal ions from the tested alloy was measured in ten time periods (after 1, 2, 3, 4, 5, 6, 7, 14, 21 and 30 days). Six samples were used (n = 6) for each time period that the alloy was in the solution, which means that a total of 60 samples was analyzed. Solutions, in which the samples were placed, were analyzed with the inductively coupled plasma atomic emission spectrometer (ICP-AES, JY 50P, Jobin-Ywon, France). It was found that four metal ions were released; zinc ions (Zn), chromium ions (Cr), copper ions (Cu) and iron ions (Fe). The most released ions from the gold-platinum alloy were those of zinc (Zn), and the least released were those of iron (Fe) (p < 0.01). The results of the study show that the time the tested alloy spent in the phosphate buffer pH 6.0 solution has an effect on the release of ions (p < 0.01).