Downed woody debris carbon emissions in a European temperate virgin forest as driven by species, decay classes, diameter and microclimate.

Downed woody debris (DWD) plays an important role as regulator of nutrient and carbon (C) cycling in forests, accounting for up to the 20 % of the total C stocks in primary forests. DWD persistence is highly influenced by microbial decomposition, which is determined by various environmental factors, including fluctuations in temperature and moisture, as well as in intrinsic DWD properties determined by species, diameter, or decay classes (DCs). The relative importance of these different drivers, as well as their interactions, remains largely unknown. Moreover, the importance of DWD for C cycling in virgin forests remains poorly understood, due to their scarcity and poor accessibility. To address this research gap, we conducted a study on DWD respiration (RDWD), in a temperate virgin forest dominated by European beech and silver fir. Our investigation analysed the correlation between RDWD of these two dominant tree species and the seasonal changes in climate (temperature and moisture), considering other intrinsic DWD traits such as DCs (1, 2 and 4) and diameters (1, 10 and 25 cm). As anticipated, RDWD (normalized per gram of dry DWD) increased with air temperature. Surprisingly, DWD diameter also had a strong positive correlation with RDWD. Nonetheless, the sensitivity to both variables and other intrinsic traits (DC and density) was greatly modulated by the species. On the contrary, water content, which exhibited a considerable spatial variation, had an overall negative effect on RDWD. Virgin forests are generally seen as ineffective C sinks due to their lack of net productivity and high respiration and nutrient turnover. However, the rates of RDWD in this virgin forest were significantly lower than those previously estimated for managed forests. This suggests that DWD in virgin forests may be buffering forest CO2 emissions to the atmosphere more than previously thought.

Development of a 3D ultrafast laser written near-infrared spectro-interferometer.

Direct ultrafast laser photoinscription of transparent materials is a powerful technique for the development of embedded 3D photonics. This is particularly adaptable for astrophotonic devices when a number of inputs are required. The process relies essentially on volume fabrication of waveguiding structures in flexible 3D designs and refractive index contrast parameters adjustable for specific spectral ranges. This enables 3D geometry and thus avoids in-plane crossings of waveguides that can induce losses and cross talk in multi-telescope beam combiners. The additional novel capability of the technique allows for the fabrication of high aspect ratio nanostructures nonperturbatively sampling the optical field. Combining ultrafast laser micro- and nanoprocessing with engineered beams, we present here results for the development of chip-sized silica glass integrated robust 3D three-telescope beam combiners in the near-IR range, as well as embedded diffraction gratings, for phase closure analysis and spectro-interferometry applications in astronomy.

Waveguide scattering antennas made by direct laser writing in bulk glass for spectrometry applications in the short-wave IR.

A buried straight waveguide perturbed periodically by six antennas composed of submicronic cylinder voids is entirely fabricated using ultrafast laser photoinscription. The light scattered from each antenna is oriented vertically and is detected by a short-wave IR camera bonded to the surface of the glass with no relay optics. The response of each antenna is analyzed using a wavelength tunable laser source and compared to simulated responses verifying the behavior of the antenna. These results show the good potential of the direct laser writing technique to realize monolithic embedded detectors by combining complex optical functions within a 3D design. A wavelength meter application with a spectral resolution of 150 pm is proposed to demonstrate this combination.

Truncated Gaussian-Bessel beams for short-pulse processing of small-aspect-ratio micro-channels in dielectrics.

In order to control the length of micro-channels ablated at the surface of dielectrics, we use annular filtering apertures for tailoring the depth of focus of micrometric Gaussian-Bessel beams. We identify experimentally and numerically the appropriate beam truncation that promotes a smooth axial distribution of intensity with a small elongation, suitable for processing micro-channels of small aspect ratio. Single-shot channel fabrication is demonstrated on the front surface of a fused silica sample, with sub-micron diameter, high-quality opening, and depth of few micrometers, using 1 ps low-energy (< 0.45 µJ) pulse. Finally, we realize 10 × 10 matrices of densely packed channels with aspect ratio ~5 and a spatial period down to 1.5 µm, as a prospective demonstration of direct laser fabrication of 2D photonic-crystal structures.

Nonequilibrium optical properties of transition metals upon ultrafast electron heating.

Femtosecond laser excitation of metals triggers swift modifications of the electronic distribution within the band structure. This has direct consequences on optical transitions transiently modifying the optical properties of materials. Influencing in real time the action of the pulse, these changes lead to substantial variations of the amount and the distribution in the energy deposited during the laser irradiation. The effect of the laser pulse can be described considering electrons heated to a range of electronic temperatures. In order to evaluate the dielectric response of ultrafast heated electrons, we performed ab initio molecular dynamic simulations coupled to the Kubo-Greenwood formalism and determined electronic temperature dependent optical properties. A series of representative transition metals was investigated: Cu, Ni, Cr, W, Ti, and Fe. The evolution of the optical properties is optically-pumped based on electronic redistribution within the density of electronic states. The proposed interpretation rely on modifications of the energy range of occupied states undergoing optical electronic transitions. It is found that the degree of filling and the shape of the d-block drive the dynamics of optical processes. Nonequilibrium optical indices, reflectivities and skin depths are reported for electron thermal excitation relevant to near-threshold laser ablation regimes. The effect of the electron temperature on optical properties allows to reconstruct and model ultrafast excitation dynamics in time-resolved diagnostics with relevance in laser micro- and nano-processing.

Efficient point-by-point Bragg gratings fabricated in embedded laser-written silica waveguides using ultrafast Bessel beams.

We demonstrate highly efficient Bragg gratings written point-by-point by sequential single-pulse ultrashort Bessel laser beams in laser photoinscribed single-mode waveguides in bulk fused silica. The use of chirped non-diffractive Bessel beams determines a strong Bragg resonance in a weak-to-strong transitional regime, augmenting to a record value of 40 dB/cm at 1550 nm in the third order. The Bessel-induced refractive index modulation is negative and localized to sub-micrometer (200 nm) transverse scales. The strong light confinement in Bessel beams ensuring uniform one-dimensional void conditions thus allows for enhanced precision in the Bragg grating waveguide design. We demonstrate flexible fabrication of multiplexed waveguide gratings for multiple and tunable spectral resonances.

Near infrared spectro-interferometer using femtosecond laser written GLS embedded waveguides and nano-scatterers.

Guided optics spectrometers can be essentially classified into two main families: based on Fourier transform or dispersion. In the first case, an interferogram generated inside an optical waveguide and containing the spectral information is sampled using spatially distributed nanodetectors. These scatter quasi-non-perturbingly light into the detector that is in contact with the waveguide, helping to reconstruct the stationary wave. A dedicated FFT processing is needed in order to recover the spectrum with high resolution but limited spectral range. Another way is to directly disperse the different wavelengths to different pixels, either introducing differential optical path in the same propagation plane (multiple Mach-Zehnder interferometers or Arrayed Waveguides Gratings), or using a periodic structure to perpendicularly extract the optical signal confined in a waveguide (photonic crystals or surface gratings), and by means of a relay optics, generate the spectrum on the Fourier plane of the lens, where the detector is placed. Following this second approach, we present a laser-fabricated high-resolution compact dispersive spectro-interferometer (R>2500, 30nm spectral range at λ = 1560nm), using four parallel waveguides that can provide up to three non-redundant interferometric combinations. The device is based on guided optics technology embedded in bulk optical glass. Ultrafast laser photoinscription with 3D laser index engineering in bulk chalcogenide Gallium Lanthanium Sulfide glass is utilized to fabricate large mode area waveguides in an evanescently-coupled hexagonal multicore array configuration, followed by subsequent realization of nanoscaled scattering centers via one dimensional nanovoids across the waveguide, written in a non-diffractive Bessel configuration. A simple relay optics, with limited optical aberrations, reimages the diffracted signal on the focal plane array, leading to a robust, easy to align instrument.

Low-power-threshold photonic saturable absorber in nonlinear chalcogenide glass.

We experimentally demonstrate controllable nonlinear modulation of optical guiding in ultrafast laser-written evanescently coupled waveguide arrays in bulk gallium lanthanum sulfide chalcogenide glass. The intensity-dependent response is validated by simulating light propagation in waveguide arrays with instantaneous Kerr nonlinearity using a discrete-continuous spatiotemporal unidirectional Maxwell equation model. The intensity-driven modulation of transmission in multicore structures acts as a potential saturable absorber at kilowatt threshold levels.

Large-mode-area infrared guiding in ultrafast laser written waveguides in sulfur-based chalcogenide glasses.

Current demands in astrophotonics impose advancing optical functions in infrared domains within embedded refractive index designs. We demonstrate concepts for large-mode-area guiding in ultrafast laser photowritten waveguides in bulk Sulfur-based chalcogenide glasses. If positive index contrasts are weak in As2S3, Ge doping increases the matrix rigidity and allows for high contrast (10(-3)) positive refractive index changes. Guiding with variable mode diameter and large-mode-area light transport is demonstrated up to 10 µm spectral domain using transverse slit-shaped and evanescently-coupled multicore traces.

Is prosthetic repair of the abdominal wall in clean-contaminated surgical interventions possible?

The present study tries to provide an expressive, customized answer to the question in the title. The study relies on a ten-year experience (2000-2009), evaluated retrospectively on a group of 488 prosthetic repairs of incisional herniae, out of which 432 were performed in a clean environment and 56 cases in a clean-contaminated one. The two groups are superimposable based on the Apache score. The visceral surgical procedures associated to the surgery of the parietal defect were varied (cholecystectomy, appendectomy, enterectomy enterorrhaphy,colectomy colotomy-colorrhaphy, hysterectomy with adnexectomy). The assessment of postoperative suppurative complications showed no significant differences between the two groups (p 0.001). These results lead us to the idea of defining the indication for parietal prosthetic repair in a contaminated environment. The major factors of this decision are: the nature, the source and the amount of the septicinoculum, the duration of exposure, the intensity of the host inflammatory response (more difficult to quantify), and finally the surgical judgment. The last mentioned factor will evaluate the above-mentioned data and will take into account that not all bacterial contaminations are necessarily followed by an established infection. Thus, additional exaggerations - which would mean taking useless, ineffective precautions- as well as negative exaggerations - which would mean hazardous boldness- will be avoided.

Large mode area waveguides with polarization functions by volume ultrafast laser photoinscription of fused silica.

We present optical designs allowing large mode area light guiding by ultrafast laser photoinscription of bulk fused silica. If usual concepts are based on large core and depressed cladding, evanescently coupled multicore waveguides with coherent mode superposition can be effective solutions, where the introduction of nanostructured defects determines additional polarization functions.

[Certitudes and controversy regarding neural elements preservation in total mesorectal excision technique (ETM)]. / Certitudini si controverse privind conservarea elementelor nervoase în tehnica de excizie totala a mezorectului (ETM).

The total excision of the mezorect, as a technique of reference in the surgical solution of rectal cancer, is evaluated today through the view of the oncological and functional outcome. Within the functional outcome, the genito-urinary disorders which follow the damage of the pelvic vegetative nervous structures, still cause discussions and controversy among dedicated specialists in this area. The work plans to share an experience of over ten years of ETM practice, in which the technico-tactical accumulation have been realized progressively, outlining a relatively codificated attitude, centered on the "critical moments" of this intervention.

Control of ultrafast laser-induced bulk nanogratings in fused silica via pulse time envelopes.

Employing a method of in-situ control we propose an approach for the optimization of self-arranged nanogratings in bulk fused silica under the action of ultrashort laser pulses with programmable time envelopes. A parametric study of the influence of the pulse duration and temporal form asymmetries is given. Using the diffraction properties of the laser-triggered subwavelength patterns we monitor and regulate the period and the quality of the periodic nanoscale arrangement via the effective nonlinear excitation dose. Periodicity tuning on tens of nanometers can be achieved by pulse temporal variations, with a minimum around 0.7 ps at the chosen powers. Equally, strong sensitivity to pulse asymmetries is observed. The driving factor is related to increasing carrier densities due to nonlinear confinement and the development of extended nanoroughness domains upon multiple exposure, creating a pulse-dependent effective accumulation dose via a morpho-dimensional effect. The result may impact the associated optical functions.

Peculiarities of diagnosis and treatment in the polyp-cancer sequence.

Colorectal cancer, a public health problem with major social implications, has attracted major economic resources and specialized centers focused in the direction of obtaining an early diagnosis from effective screening means in the last decades. It is obvious that the therapeutic results and the social costs are primarily dependent on the precocity of diagnosis. The present paper aims to bring to attention a number of orientations, which may open a new perspective in approaching the genetic and molecular level of these lesions. Out of these, the value of the molecular screening based on the detection of the APC gene located on the short arm of chromosome 5, a method that allows the selection of the subjects to be subjected to further endoscopic screening is underlined. The optimization of the costs as well as the increased compliance of the subjects to such a method is thus accomplished.

Map syndrome (MYH Associated Polyposis) colorectal cancer, etiopathological connections.

The case presented raised our scientific curiosity and it is worthy of being brought in front of the medical audience because of several reasons presented below. Presently, there are 3 hereditary syndromes that have a demonstrated etiological relationship with the colorectal cancer: Familiar Adenomatous Polyposis (FAP syndrome), HNPCC syndrome (Hereditary Nonpoliposis Colorectal Cancer) and MAP syndrome.Discovered only in 2002, the MAP syndrome (MYH associated polyposis) is the first hereditary syndrome that has autosomal recessive transmission. The APC gene can be mutated in several ways during the colonic oncogenesis: congenital in the FAP syndrome, somatic in sporadic colorectal cancers and secondary to the MYH gene inactivation in MAP syndrome. MAP phenotype is similar to the FAP phenotype because of the somatic mutations to the APC gene. Colonic polyposis is lower than FAP syndrome and appeared later, in the 40's and 50's. Colorectal cancers are frequent and discovered in the same moment as the colonic polyposis. Patients are diagnosed mostly in cancer stages. Colonoscopy shows polyps disseminated around the entire colic frame. Treatment in these cases is total rectocolectomy with ileoanal anastomosis. When working in a general emergency surgery clinic, physicians are often faced with colorectal cancers in different evolutive stages, and mostly they are faced with their complications.

Single-pulse ultrafast laser imprinting of axial dot arrays in bulk glasses.

Ultrafast laser processing of bulk transparent materials can significantly gain flexibility when the number of machining spots is increased. We present a photoinscription regime in which an array of regular dots is generated before the region of main laser focus under single-pulse exposure in fused silica and borosilicate crown glass without any external spatial phase modulation. The specific position of the dots does not rely on nonlinear propagation effects but is mainly determined by beam truncation and is explained by a Fresnel propagation formalism taking into account beam apodization and linear wavefront distortions at the air/glass interface. The photoinscription regime is employed to generate a two-dimensional array of dots in fused silica. We show that an additional phase modulation renders flexible the pattern geometry.

Nanosize structural modifications with polarization functions in ultrafast laser irradiated bulk fused silica.

Laser-induced self-organization of regular nanoscale layered patterns in fused silica is investigated using spectroscopy and microscopy methods, revealing a high presence of stable broken oxygen bonds. Longitudinal traces are then generated by replicating static irradiation structures where the nanoscale modulation can cover partially or completely the photoinscribed traces. The resulting birefringence, the observed anisotropic light scattering properties, and the capacity to write and erase modulated patterns can be used in designing bulk polarization sensitive devices. Various laser-induced structures with optical properties combining guiding, scattering, and polarization sensitivity are reported. The attached polarization functions were evaluated as a function of the fill factor of the nanostructured domains. The polarization sensitivity allows particular light propagation and confinement properties in three dimensional structures.

Tuning spectral properties of ultrafast laser ablation plasmas from brass using adaptive temporal pulse shaping.

Using automated laser pulse temporal shaping we report on enhancing spectral emission characteristics of ablation plasmas produced by laser irradiation of brass on ultrafast time scales. For different input irradiance levels, control of both atomic and ionic species becomes possible concerning the yield and the excitation state. The improved energy coupling determined by tailored pulses induces material ejection with lower mechanical load that translates into hot gas-phase regions with higher excitation degrees and reduced particulates.

Ultrafast laser photoinscription of polarization sensitive devices in bulk silica glass.

Ultrashort pulsed laser irradiation of bulk fused silica may result under specific energetic conditions in the self-organization of subwavelength material redistribution regions within the laser trace. The modulated structures have birefringent properties and show unusual anisotropic light scattering and reflection characteristics. We report here on the formation of waveguiding structures with remarkable polarization effects for infrared light. The photoinscription process using 800 nm femtosecond laser pulses is accompanied by third harmonic generation and polarization dependent anisotropic scattering of UV photons. The photowritten structures can be arranged in three-dimensional patterns generating complex propagation and polarization effects due to the anisotropic optical properties.

Dynamic ultrafast laser spatial tailoring for parallel micromachining of photonic devices in transparent materials.

Femtosecond laser processing of bulk transparent materials can generate localized positive changes of the refractive index. Thus, by translation of the laser spot, light-guiding structures are achievable in three dimensions. Increasing the number of laser processing spots can consequently reduce the machining effort. In this paper, we report on a procedure of dynamic ultrafast laser beam spatial tailoring for parallel photoinscription of photonic functions. Multispot operation is achieved by spatially modulating the wavefront of the beam with a time-evolutive periodical binary phase mask. The parallel longitudinal writing of multiple waveguides is demonstrated in fused silica. Using this technique, light dividers in three dimensions and wavelength-division demultiplexing (WDD) devices relying on evanescent wave coupling are demonstrated.