Low-filled suspensions of α-chitin nanorods for electrorheological applications.

Highly anisometric α-chitin nanoparticles isolated by TEMPO-oxidation were investigated as filler for electrorheological fluids. The dimensions of rod-like particles were determined by AFM and cryo-TEM methods. The rheological behavior of α-chitin nanoparticles in polydimethylsiloxane changes from viscous to elastic under electric field. The yield stress reaches about 220 Pa at 7 kV/mm for 1.0 wt% fluid. Despite the nanosize of particles, the suspensions sedimentation ratio was found to be low (~23%). The electrorheological behavior of the fluids was discussed in terms of the Mason numbers. The stability of fluids response under switching electric field was shown. The activation energy of polarization processes in suspensions was calculated as 58 ± 2 and 64 ± 1 kJ/mol for 0.5 and 1.0 wt% filler content from the impedance spectra. The high aspect ratio (~70) and dielectric permittivity result in high electrorheological activity of α-chitin suspensions at extremely low concentrations (≤1.0 wt%).

Structural characterization and magnetic response of poly(p-xylylene)-MnSb and MnSb films deposited at cryogenic temperature.

In this study, we employed several experimental techniques to investigate structure and magnetic properties of poly(p-xylylene)-MnSb composites synthesized by low-temperature vapor deposition polymerization technique and MnSb films deposited at various temperatures. The presence of MnSb nanocrystallites in the studied films was verified by the results of X-ray diffraction, electron microscopy and Raman spectroscopy studies. The obtained data revealed the formation of Sb-rich sublayer with well-oriented Sb grains near the susbtrate, which seems to act as a buffer for the consequent poly(p-xylylene)-MnSb or MnSb layer growth. Increasing the polymer content results in qualitative change of surface morphology of studied films. At high polymer content the hybrid nanocomposite with MnSb nanoparticles embedded into poly(p-xylylene) matrix is formed. All investigated samples demonstrated detectable ferromagnetic response at room temperature, while the parameters of this response revealed a complex correlation with nominal composition, presented crystal phases and surface morphology of studied films. Estimated values of the Curie temperature of the samples are close to that of bulk MnSb.

Effect of exfoliating agent on rheological behavior of ß-chitin fibrils in aqueous suspensions and on mechanical properties of poly(acrylic acid)/ß-chitin composites.

Chitin whiskers are promising reinforcing filler for composites due to their mechanical properties, renewable nature and low cost. A new method for preparation of ß-chitin fibrils from squid pens in ascorbic acid aqueous solutions (AscA) was developed. Stirring of the solution with 2 g/l AscA for 2 h disperses the swollen chitin to individualized fibrils with an aspect ratio > 250. The optimal conditions of ß-chitin exfoliation in acrylic acid (AcrA) aqueous solution were found (0.75-2 g/l, 3-4 h). TEMPO-oxidized ß-chitin fibrils were chosen as a reference sample for comparison of different methods. 0.1% chitin suspensions exfoliated in AscA and AcrA solutions show similar gel-like behavior with a storage modulus (G') of 98 ±â€¯23 and 34 ±â€¯12 Pa, respectively, whereas G' of 0.1% dispersion of the TEMPO-oxidized ß-chitin fibrils was 0.015 ±â€¯0.005 Pa only. Composites based on poly(acrylic acid) comprising 1-3 wt% of ß-chitin fibrils were fabricated by polymerization filling. Mechanical properties of the composites were investigated in dry state in the temperature range of 25-250 °C and at controlled relative humidity in the range from 53.6% to 100%. It was revealed that the maximum reinforcing effect is achieved at high temperature (>120 °C) and high relative humidity (≥75.3%RH).