In vitro study of structural and chemical changes in two reciprocating files after multiple reuses and sterilisation.

To use scanning electron microscopy and energy dispersive X-ray spectroscopy to evaluate the metallurgical-chemical changes of WaveOne Gold (WOG) and R-Motion (RM), after multiple uses. The instruments were divided into groups (n = 8): WOG and RM-control groups, new instruments; WOG1 and RM1; WOG2 and RM2; WOG3 and RM3 after instrumentation of 1, 2 or 3 molars, respectively. Burrs occurred mainly in the control group and after the first use. The RM files were found to have a higher nickel content, which increased during reuse, and a decrease in oxygen content with increasing reuse, in addition to calcium impregnation, which occurred in greater amounts in the corrosion areas in the WOG files. The presence of topographic and chemical changes was demonstrated, indicating that caution should be taken when reusing endodontic instruments to avoid fractures.

Pulp-Dentin Complex Regeneration with Cell Transplantation Technique Using Stem Cells Derived from Human Deciduous Teeth: Histological and Immunohistochemical Study in Immunosuppressed Rats.

The aim of this study was to histologically verify the performance of pulp-derived stem cells used in the pulp-dentin complex regeneration. Maxillary molars of 12 immunosuppressed rats were divided into two groups: the SC (stem cells) group, and the PBS (just standard phosphate-buffered saline) group. After pulpectomy and canal preparation, the teeth received the designated materials, and the cavities were sealed. After 12 weeks, the animals were euthanized, and the specimens underwent histological processing and qualitative evaluation of intracanal connective tissue, odontoblast-like cells, intracanal mineralized tissue, and periapical inflammatory infiltrate. Immunohistochemical evaluation was performed to detect dentin matrix protein 1 (DMP1). In the PBS group, an amorphous substance and remnants of mineralized tissue were observed throughout the canal, and abundant inflammatory cells were observed in the periapical region. In the SC group, an amorphous substance and remnants of mineralized tissue were observed throughout the canal; odontoblasts-like cells immunopositive for DMP1 and mineral plug were observed in the apical region of the canal; and a mild inflammatory infiltrate, intense vascularization, and neoformation of organized connective tissue were observed in the periapical region. In conclusion, the transplantation of human pulp stem cells promoted partial pulp tissue neoformation in adult rat molars.

Influence of apical preparation size and final irrigation protocol on the debridement of oval root canals

Abstract This study assessed the influence of apical preparation size and final irrigation protocol on the debridement of the apical third of oval root canals of mandibular molars. Seventy-seven distal roots were divided into 7 groups (n = 11): Control: without instrumentation or irrigation; Group 30CI: ProTaper Next (up to size 30; PTN) + conventional irrigation (CI); Group 30UAI: PTN + ultrasonically activated irrigation (UAI); Group 30XPF: PTN + XP-endo Finisher (XPF); Group 40CI: PTN + ProDesign Logic (up to size 40; PDL) + CI; Group 40UAI: PTN + PDL + UAI; and Group 40XPF: PTN + PDL + XPF. The total volume of irrigating solutions used per root canal in all the experimental groups was 33 mL of 2.5% sodium hypochlorite (NaOCl) and 6 mL of 17% ethylenediaminetetraacetic acid (EDTA). After specimen processing and histological analysis under a digital microscope (100x), the percentages of untouched canal walls (UCW) and remaining debris (RD) were assessed using Image J software. A descriptive and exploratory analysis was conducted, indicating that the data failed to meet the assumptions of an analysis of variance. Therefore, generalized linear models were used to assess the effects of the different instrumentation and irrigation protocols, as well as the interaction among them, on the percentage of UCW and RD. No significant difference was found among the irrigation protocols regarding the percentage of UCW, irrespective of apical preparation size (p>0.05). However, UCW and RD were significantly lower in groups 40CI, 40UAI and 40XPF than in groups 30CI, 30UAI and 30XPF (p<0.05). The percentage of RD was significantly lower in the UAI and XPF groups than in the CI groups, irrespective of apical preparation size (p<0.05). The difference between preparation sizes 30 and 40, with respect to RD, was higher when CI was used (p<0.05). In conclusion, instrumentation up to apical preparation size 40 resulted in lower percentages of UCW and RD than up to apical preparation size 30. Use of UAI or XPF resulted in lower percentages of RD than CI.

Resumo Este estudo avaliou a influência do tamanho do preparo apical e do protocolo de irrigação final sobre o debridamento do terço apical de canais radiculares ovais de molares inferiores. Setenta e sete raízes distais foram selecionadas e divididas em 7 grupos (n = 11): Grupo controle: sem instrumentação nem irrigação; Grupo 30IC, ProTaper Next (até o tamanho 30; PTN) + irrigação convencional (IC); Grupo 30IAU, PTN + irrigação ativada ultrassonicamente (IAU); Grupo 30XPF, PTN + XP-endo Finisher (XPF); Grupo 40IC, PTN + ProDesign Logic (até o tamanho 40; PDL) + IC; Grupo 40IAU, PTN + PDL + IAU; e Grupo 40XPF, PTN + PDL + XPF. Os volumes totais dos irrigantes utilizados por canal radicular em todos os grupos experimentais foram 33 mL de hipoclorito de sódio (NaOCl) a 2,5% e 6 mL de ácido etilenodiamino tetracético (EDTA) a 17%. Após o processamento dos espécimes e a análise das secções histológicas sob um microscópio digital (100x), as porcentagens de paredes não instrumentadas (PNI) e detritos remanescentes (DR) foram avaliadas utilizando-se o software Image J. Uma análise descritiva e exploratória foi realizada, indicando que os dados não atenderam aos pressupostos de uma análise de variância. Modelos lineares generalizados foram, portanto, utilizados para avaliar os efeitos dos diferentes protocolos de instrumentação e irrigação, bem como da interação entre eles, sobre as porcentagens de PNI e DR. Não houve diferença significativa entre os protocolos de irrigação final quanto à porcentagem de PNI, independentemente do tamanho do preparo apical (p>0,05). Entretanto, as porcentagens de PNI e DR foram significativamente menores nos grupos 40IC, 40IAU e 40XPF do que nos grupos 30IC, 30IAU e 30XPF (p<0,05). A porcentagem de DR foi significativamente menor nos grupos em que se utilizou a IAU ou o XPF do que naqueles em que se utilizou a IC, independentemente do tamanho do preparo apical (p<0,05). A diferença entre os tamanhos de preparo apical 30 e 40 com relação aos DR foi maior quando se utilizou a IC (p<0,05). Concluiu-se que a instrumentação até um preparo apical de tamanho 40 resultou em menores porcentagens de PNI e DR do que até um preparo apical de tamanho 30. A utilização da IAU ou do XPF resultou em uma menor porcentagem de DR do que a utilização da IC.

Influence of apical preparation size and final irrigation protocol on the debridement of oval root canals.

This study assessed the influence of apical preparation size and final irrigation protocol on the debridement of the apical third of oval root canals of mandibular molars. Seventy-seven distal roots were divided into 7 groups (n = 11): Control: without instrumentation or irrigation; Group 30CI: ProTaper Next (up to size 30; PTN) + conventional irrigation (CI); Group 30UAI: PTN + ultrasonically activated irrigation (UAI); Group 30XPF: PTN + XP-endo Finisher (XPF); Group 40CI: PTN + ProDesign Logic (up to size 40; PDL) + CI; Group 40UAI: PTN + PDL + UAI; and Group 40XPF: PTN + PDL + XPF. The total volume of irrigating solutions used per root canal in all the experimental groups was 33 mL of 2.5% sodium hypochlorite (NaOCl) and 6 mL of 17% ethylenediaminetetraacetic acid (EDTA). After specimen processing and histological analysis under a digital microscope (100x), the percentages of untouched canal walls (UCW) and remaining debris (RD) were assessed using Image J software. A descriptive and exploratory analysis was conducted, indicating that the data failed to meet the assumptions of an analysis of variance. Therefore, generalized linear models were used to assess the effects of the different instrumentation and irrigation protocols, as well as the interaction among them, on the percentage of UCW and RD. No significant difference was found among the irrigation protocols regarding the percentage of UCW, irrespective of apical preparation size (p>0.05). However, UCW and RD were significantly lower in groups 40CI, 40UAI and 40XPF than in groups 30CI, 30UAI and 30XPF (p<0.05). The percentage of RD was significantly lower in the UAI and XPF groups than in the CI groups, irrespective of apical preparation size (p<0.05). The difference between preparation sizes 30 and 40, with respect to RD, was higher when CI was used (p<0.05). In conclusion, instrumentation up to apical preparation size 40 resulted in lower percentages of UCW and RD than up to apical preparation size 30. Use of UAI or XPF resulted in lower percentages of RD than CI.

Irrigant Agitation Techniques versus Passive Ultrasonic Irrigation for Removing Debris from Curved Root Canals: An Environmental Scanning Electron Microscopic Study.

Introduction: The aim of this study was to compare the efficacy of passive ultrasonic irrigation (PUI) versus mechanical agitation of the irrigant promoted by the EasyClean (EC) and XP-Endo Finisher (XP-F) systems in removing debris from root canal walls, using environmental scanning electron microscopy (ESEM). Methods and Materials: Twelve curved mesiobuccal canals of mandibular molars were prepared with the ProTaper Next system up to file X2 (25/0.06). The specimens were embedded in flasks containing silicone putty, sectioned lengthwise, and a 4-mm long groove was made on the canal wall of the buccal half of the specimen, extending from 2 mm up to 6 mm short of the apex. Five cross-sectional markings were made along this groove to establish standardized locations for imaging. The same specimens were used to prepare a negative control group (without debris), a positive control group (completely covered by debris), and 3 experimental groups according to the final irrigation protocol employed: PUI, EC or XP-F. ESEM images were obtained and evaluated by 3 examiners. The amount of debris observed on the images was classified according to a 4-category scoring system. The kappa test was used to assess inter-examiner agreement, and the Kruskal-Wallis and Dunn tests were used to compare the scores (P<0.05). Results: The scores attributed to the PUI, EC, and XP-F groups were statistically similar to those attributed to the negative control group (P>0.05). Conclusion: Based on this in-vitro study, the mechanical agitation of the irrigant promoted by EC and XP-F was as effective as using PUI to remove debris from the root canal walls.

Micro-computed Tomographic Assessment of Supplementary Cleaning Techniques for Removing Bioceramic Sealer and Gutta-percha in Oval Canals.

INTRODUCTION: The aim of this study was to conduct a micro-computed tomographic assessment of the effectiveness of 3 supplementary cleaning techniques in reducing the residual volume of gutta-percha and a bioceramic sealer after performing endodontic retreatment procedures in teeth with oval canals. METHODS: Thirty-six mandibular premolars were instrumented with the ProTaper Next system (instruments X1-X3; Dentsply Maillefer, Ballaigues, Switzerland) and filled with gutta-percha and Bio-C Sealer (Angelus, Londrina, PR, Brazil) using the single-cone technique. The teeth were reinstrumented with the Reciproc R40 instrument (VDW, Munich, Germany) and divided into 3 groups according to the supplementary cleaning technique used (n = 12): ultrasonic-assisted irrigation (UAI), EndoActivator (Dentsply Tulsa Dental Specialties, Tulsa, OK) irrigation (EAI), or the XP-endo Finisher R system (XPR; FKG Dentaire, La Chaux-de-Fonds, Switzerland). Micro-computed tomographic imaging was used to quantify the residual volume of filling material. One-way analysis of variance complemented by the Tukey test was used to perform the statistical analysis (P < .05). RESULTS: Significant reductions were obtained in the residual filling material after supplementary cleaning (P < .05). XPR (47.5%) led to significantly greater (P < .05) filling material removal than UAI (16.6%) or EAI (22.6%). The removal values of the 2 latter systems were not significantly different. CONCLUSIONS: XPR was more effective than UAI and EAI in removing filling material in mandibular premolars with oval canals. None of the tested supplementary cleaning techniques completely removed the residual filling material.

Influence of foraminal enlargement on the apical extrusion of filling material: Volumetric analysis using micro-computed tomography.

The aim of this study was to compare the root canal instrumentation techniques that involve foraminal enlargement versus those not involving it, in regard to the apical extrusion of filling material, using micro-computed tomography (micro-CT). Twenty-two premolars with single canals were instrumented using the ProTaper Universal System and then randomly divided into two groups (n = 11): Group NFE, without foraminal enlargement, and Group FE, with foraminal enlargement. Instrumentation was performed up to 1 mm short of the apical foramen, and foraminal patency was maintained at each instrument change in both groups. Prior to obturation, the apical portion of the specimens was wrapped in adhesive paper to ensure complete separation between apex and extruded material. The canals were filled according to the continuous wave of condensation technique. The apically extruded material was collected and measured using micro-CT. Extrusion in Group FE was significantly higher than in Group NFE (0.928 mm3 vs. 0.148 mm3 ; P < 0.001).

Micro-computed Tomography versus the Cross-sectioning Method to Evaluate Dentin Defects Induced by Different Mechanized Instrumentation Techniques.

INTRODUCTION: The objective of this study was to compare the methods of micro-computed tomography (micro-CT) and cross-sectioning followed by stereomicroscopy in assessing dentinal defects after instrumentation with different mechanized systems. METHODS: Forty mesial roots of mandibular molars were scanned and divided into 4 groups (n = 10): Group R, Reciproc; Group PTN, ProTaper Next; Group WOG, WaveOne Gold; Group PDL, ProDesign Logic. After instrumentation, the roots were once again submitted to a micro-CT scan, and then sectioned at 3, 6, and 9 mm from the apex, and assessed for the presence of complete and incomplete dentinal defects under a stereomicroscope. The nonparametric Kruskal-Wallis, Friedman, and Wilcoxon tests were used in the statistical analysis. The study used a significance level of 5%. RESULTS: The total number of defects observed by cross-sectioning followed by stereomicroscopy was significantly higher than that observed by micro-CT, in all of the experimental groups (P ≤ .05). All of the defects identified in the postoperative period were already present in the corresponding preoperative period. There was no significant difference among the instrumentation systems as to the median numbers of defects, for either cross-sectioning followed by stereomicroscopy or micro-CT, at all the root levels (P > .05). In the micro-CT analysis, no significant difference was found between the median numbers of pre- and postinstrumentation defects, regardless of the instrumentation system (P > .05). CONCLUSION: None of the evaluated instrumentation systems led to the formation of new dentin defects. All of the defects identified in the stereomicroscopic analysis were already present before instrumentation, or were absent at both time points in the micro-CT analysis, indicating that the formation of new defects resulted from the sectioning procedure performed before stereomicroscopy and not from instrumentation.

Avaliação da acurácia de quatro localizadores apicais durante o retratamento endodôntico / Evaluate the accuracy of four electronic apex locators during endodontic retreatment

Este estudo teve como objetivo avaliar a acurácia de quatro localizadores apicais eletrônicos durante o retratamento endodôntico. Quarenta pré-molares unirradiculares com apenas um canal, ápice completamente formado, foram divididos em quatro grupos e analisados: Grupo 1: Root ZX ll. Grupo 2: Mini Root. Grupo 3: Propex ll e Grupo 4: Mini Apex. Todos os elementos foram padronizados no comprimento de 22 mm, instrumentados com limas Wave One Primary (25.08), obturados e armazenados. Após um mês, foram desobturados com limas reciprocantes Wave One Primary (25.08) e, em seguida, montados em blocos de esponja vegetal, embebida em solução de cloreto de sódio a 0,9%. A acurácia eletrônica de cada elemento foi realizada, utilizando-se uma lima manual do tipo K#20, até que a mesma fosse ultrapassada pelo forame e recuada até o comprimento real do dente, onde, então, as medidas de cada elemento eram anotadas. Todas as medidas obtidas de cada grupo passaram por análise estatística. Não houve diferença estatisticamente significante entre os localizadores apicais eletrônicos analisados, quando utilizados durante o retratamento endodôntico, sendo possível concluir que, os quatro modelos de localizadores apicais analisados mostraram-se eficientes durante o retratamento endodôntico, dentro dos limites estabelecidos, não havendo diferença entre eles.

This study aimed to evaluate the accuracy of four electronic apex locators during endodontic retreatment. Forty single-rooted premolars, with a root canal, with fully formed apex, were divided into four groups and analyzed: Group 1: Root ZX II. Group 2: Mini Root. Group 3: Propex II and Group 4: Mini Apex. All elements have been standardized in the length of 22 mm, instrumented with Wave One Primary (25.08) files, sealed and stored. After a month, the desobturation with reciprocating Wave One Primaty (25.08) files off and then assembled into blocks vegetable sponge, soaked in 0.9% sodium chloride solution. Electronic accuracy of each element was performed using a manual file type K#20, until it was overtaken by the foramen and retracted to the actual length of the tooth, which then measures each element were noted. All measurements obtained from each group passed by statistical analysis. There was no statistically significant difference between the electronic apex locators analyzed when used during endodontic retreatment it is possible to conclude that the four models analyzed apex locators were effective during endodontic retreatment wirhin the established timits, there is no difference between them.