A Sodium Germanosilicide with Unusual Network Topology.

The germanosilicide Na4-xGeySi16-y (0.4 ≤ x ≤ 1.1, 4.7 ≤ y ≤ 9.3) was synthesized under high-pressure, high-temperature conditions. The novel guest-host compound comprises a unique tetrel framework with dual channels housing sodium and smaller, empty (Si,Ge)9 units. The arrangement represents a new structure type with an overall structural topology that is closely related to a hypothetical carbon allotrope. Topological analysis of the structure revealed that the guest environment space cannot be tiled with singular polyhedra as in cage compounds (e.g., clathrates). The analysis of natural tilings provides a convenient method to unambiguously compare related tetrel-rich structures and can help elucidate new possible structural arrangements of intermetallic compounds.

Feasible Route to High-Temperature Ambient-Pressure Hydride Superconductivity.

A key challenge in materials discovery is to find high-temperature superconductors. Hydrogen and hydride materials have long been considered promising materials displaying conventional phonon-mediated superconductivity. However, the high pressures required to stabilize these materials have restricted their application. Here, we present results from high-throughput computation, considering a wide range of high-symmetry ternary hydrides from across the periodic table at ambient pressure. This large composition space is then reduced by considering thermodynamic, dynamic, and magnetic stability before direct estimations of the superconducting critical temperature. This approach has revealed a metastable ambient-pressure hydride superconductor, Mg_{2}IrH_{6}, with a predicted critical temperature of 160 K, comparable to the highest temperature superconducting cuprates. We propose a synthesis route via a structurally related insulator, Mg_{2}IrH_{7}, which is thermodynamically stable above 15 GPa, and discuss the potential challenges in doing so.

Pressure-Induced Amidine Formation via Side-Chain Polymerization in a Charge-Transfer Cocrystal.

Compression of small molecules can induce solid-state reactions that are difficult or impossible under conventional, solution-phase conditions. Of particular interest is the topochemical-like reaction of arenes to produce polymeric nanomaterials. However, high reaction onset pressures and poor selectivity remain significant challenges. Herein, the incorporation of electron-withdrawing and -donating groups into π-stacked arenes is proposed as a strategy to reduce reaction barriers to cycloaddition and onset pressures. Nevertheless, competing side-chain reactions between functional groups represent alternative viable pathways. For the case of a diaminobenzene:tetracyanobenzene cocrystal, amidine formation between amine and cyano groups occurs prior to cycloaddition with an onset pressure near 9 GPa, as determined using vibrational spectroscopy, X-ray diffraction, and first-principles calculations. This work demonstrates that reduced-barrier cycloaddition reactions are theoretically possible via strategic functionalization; however, the incorporation of pendant groups may enable alternative reaction pathways. Controlled reactions between pendant groups represent an additional strategy for producing unique polymeric nanomaterials.

Synthesis and Post-Processing of Chemically Homogeneous Nanothreads from 2,5-Furandicarboxylic Acid.

Compared with conventional, solution-phase approaches, solid-state reaction methods can provide unique access to novel synthetic targets. Nanothreads-one-dimensional diamondoid polymers formed through the compression of small molecules-represent a new class of materials produced via solid-state reactions, however, the formation of chemically homogeneous products with targeted functionalization represents a persistent challenge. Through careful consideration of molecular precursor stacking geometry and functionalization, we report here the scalable synthesis of chemically homogeneous, functionalized nanothreads through the solid-state polymerization of 2,5-furandicarboxylic acid. The resulting product possesses high-density, pendant carboxyl functionalization along both sides of the backbone, enabling new opportunities for the post-synthetic processing and chemical modification of nanothread materials applicable to a broad range of potential applications.

Conventional High-Temperature Superconductivity in Metallic, Covalently Bonded, Binary-Guest C-B Clathrates.

Inspired by the synthesis of XB3C3 (X = Sr, La) compounds in the bipartite sodalite clathrate structure, density functional theory (DFT) calculations are performed on members of this family containing up to two different metal atoms. A DFT-chemical pressure analysis on systems with X = Mg, Ca, Sr, Ba reveals that the size of the metal cation, which can be tuned to stabilize the B-C framework, is key for their ambient-pressure dynamic stability. High-throughput density functional theory calculations on 105 Pm3̅ symmetry XYB6C6 binary-guest compounds (where X, Y are electropositive metal atoms) find 22 that are dynamically stable at 1 atm, expanding the number of potentially synthesizable phases by 19 (18 metals and 1 insulator). The density of states at the Fermi level and superconducting critical temperature, Tc, can be tuned by changing the average oxidation state of the metal atoms, with Tc being highest for an average valence of +1.5. KPbB6C6, with an ambient-pressure Eliashberg Tc of 88 K, is predicted to possess the highest Tc among the studied Pm3̅n XB3C3 or Pm3̅ XYB6C6 phases, and calculations suggest it may be synthesized using high-pressure high-temperature techniques and then quenched to ambient conditions.

Pressure response of decylammonium-containing 2D iodide perovskites.

Manipulation by external pressure of the optical response of 2D Metal Halide Perovskites (MHPs) is a fascinating route to tune their properties and promote the emergence of novel features. We investigate here DA2PbI4 and DA2GeI4 (DA = decylammonium) perovskites in the pressure range up to ∼12 GPa by X-ray powder diffraction, absorption, and photoluminescence spectroscopy. Although the two systems share a similar structural evolution with pressure, the optical properties are rather different and influenced by Pb or Ge. DA2PbI4 shows a progressive red shift from 2.28 eV (P = 0 GPa) to 1.64 eV at 11.5 GPa, with a narrow PL emission, whereas DA2GeI4, changes from a non-PL system at ambient pressure to a clear broadband emitter centered around 730 nm with an intensity maximum at about 3.7 GPa. These results unveil the role of the central atom on the nature of emission under pressure in 2D MHPs containing a long alkyl chain.

Solid-State Pathway Control via Reaction-Directing Heteroatoms: Ordered Pyridazine Nanothreads through Selective Cycloaddition.

Nanothreads are one-dimensional nanomaterials composed of a primarily sp3 hydrocarbon backbone, typically formed through the compression of small molecules to high pressures. Although nanothreads have been synthesized from a range of precursors, controlling reaction pathways to produce atomically precise materials remains a difficult challenge. Here, we show how heteroatoms within precursors can serve as "thread-directing" groups by selecting for specific cycloaddition reaction pathways. By using a less-reactive diazine group within a six-membered aromatic ring, we successfully predict and synthesize the first carbon nanothread material derived from pyridazine (1,2-diazine, C4H4N2). Compared with previous nanothreads, the synthesized polypyridazine, shows a predominantly uniform chemical structure with exceptional long-range order, allowing for structural characterization using vibrational spectroscopy and X-ray diffraction. The results demonstrate how thread-directing groups can be used for reaction pathway control and the formation of chemically precise nanothreads with a high degree of structural order.

Bulk Crystalline 4H-Silicon through a Metastable Allotropic Transition.

We report the synthesis of bulk, highly oriented, crystalline 4H hexagonal silicon (4H-Si), through a metastable phase transformation upon heating the single-crystalline Si_{24} allotrope. Remarkably, the resulting 4H-Si crystallites exhibit an orientation relationship with the Si_{24} crystals, indicating a structural relationship between the two phases. Optical absorption measurements reveal that 4H-Si exhibits an indirect band gap near 1.2 eV, in agreement with first principles calculations. The metastable crystalline transition pathway provides a novel route to access bulk crystalline 4H-Si in contrast to previous transformation paths that yield only nanocrystalline-disordered materials.

A Lanthanum-Filled Carbon-Boron Clathrate.

We report a carbon-boron clathrate with composition 2 La@B6 C6 (LaB3 C3 ). Like recently reported SrB3 C3 ,[1] single-crystal X-ray diffraction and computational modelling indicate that the isostructural La member crystallizes in the cubic bipartite sodalite structure (Type-VII clathrate) with La atoms encapsulated within truncated octahedral cages composed of alternating carbon and boron atoms. The covalent nature of the B-C bonding results in a hard, incompressible framework, and owing to the balanced electron count, La3+ [B3 C3 ]3- exhibits markedly improved pressure stability and is a semiconductor with an indirect band gap predicted near 1.3 eV. A variety of different guest atoms may potentially be substituted within Type-VII clathrate cages, presenting opportunities for a large family of boron-stabilized, carbon-based clathrates with ranging physical properties.

Prediction of an Extended Ferroelectric Clathrate.

Using first-principles calculations, we predict a lightweight room-temperature ferroelectric carbon-boron framework in a host-guest clathrate structure. This ferroelectric clathrate, with composition ScB_{3}C_{3}, exhibits high polarization density and low mass density compared with widely used commercial ferroelectrics. Molecular dynamics simulations show spontaneous polarization with a moderate above-room-temperature T_{c} of ∼370 K, which implies large susceptibility and possibly large electrocaloric and piezoelectric constants at room temperature. Our findings open the possibility for a new class of ferroelectric materials with potential across a broad range of applications.

Raman studies of hydrogen trapped in As4O6·2H2 at high pressure and low temperature.

Raman spectroscopic measurements of the arsenolite-hydrogen inclusion compound As4O6·2H2 were performed in diamond anvil cells at high pressure and variable temperature down to 80 K. The experimental results were complemented by ab initio molecular dynamics simulations and phonon calculations. Observation of three hydrogen vibrons in As4O6·2H2 is reported in the entire temperature and pressure range studied (up to 24 GPa). While the experiments performed with protium and deuterium at variable temperatures allowed for the assignment of two vibrons as Q1(1) and Q1(0) transitions of ortho and para spin isomers of hydrogen trapped in the inclusion compound, the origin of the third vibron could not be unequivocally established. Low-temperature spectra revealed that the lowest-frequency vibron is actually composed of two overlapping bands of Ag and T2g symmetries dominated by H2 stretching modes as predicted by our previous density functional theory calculations. We observed low-frequency modes of As4O6·2H2 vibrations dominated by H2 "librations," which were missed in a previous study. A low-temperature fine structure was observed for the J = 0 → 2 and J = 1 → 3 manifolds of hydrogen trapped in As4O6·2H2, indicating the lifting of degeneracy due to an anisotropic environment. A non-spherical distribution was captured by molecular dynamics simulations, which revealed that the trajectory of H2 molecules is skewed along the crystallographic ⟨111⟩ direction. Last but not least, low-temperature synchrotron powder x-ray diffraction measurements on As4O6·2H2 revealed that the bulk structure of the compound is preserved down to 5 K at 1.6 GPa.

Nanoarchitecture through Strained Molecules: Cubane-Derived Scaffolds and the Smallest Carbon Nanothreads.

Relative to the rich library of small-molecule organics, few examples of ordered extended (i.e., nonmolecular) hydrocarbon networks are known. In particular, sp3 bonded, diamond-like materials represent appealing targets because of their desirable mechanical, thermal, and optical properties. While many covalent organic frameworks (COFs)-extended, covalently bonded, and porous structures-have been realized through molecular architecture with exceptional control, the design and synthesis of dense, covalent extended solids has been a longstanding challenge. Here we report the preparation of a sp3-bonded, low-dimensional hydrocarbon synthesized via high-pressure, solid-state diradical polymerization of cubane (C8H8), which is a saturated, but immensely strained, cage-like molecule. Experimental measurements show that the obtained product is crystalline with three-dimensional order that appears to largely preserve the basic structural topology of the cubane molecular precursor and exhibits high hardness (comparable to fused quartz) and thermal stability up to 300 °C. Among the plausible theoretical candidate structures, one-dimensional carbon scaffolds comprising six- and four-membered rings that pack within a pseudosquare lattice provide the best agreement with experimental data. These diamond-like molecular rods with extraordinarily small thickness are among the smallest members in the carbon nanothread family, and calculations indicate one of the stiffest one-dimensional systems known. These results present opportunities for the synthesis of purely sp3-bonded extended solids formed through the strain release of saturated molecules, as opposed to only unsaturated precursors.

Single-crystal synthesis and properties of the open-framework allotrope Si24.

Si24 is a new, open-framework silicon allotrope that is metastable at ambient conditions. Unlike diamond cubic silicon, which is an indirect-gap semiconductor, Si24 has a quasidirect gap near 1.4 eV, presenting new opportunities for optoelectronic and solar energy conversion devices. Previous studies indicate that Na can diffuse from micron-sized grains of a high-pressure Na4Si24 precursor to create Si24 powders at ambient conditions. Remarkably, we demonstrate here that Na remains highly mobile within large (~100 µm) Na4Si24 single crystals. Na readily diffuses out of Na4Si24 crystals under vacuum with gentle heating (10-4 mbar at 125 °C) and can be further reacted with iodine to produce large Si24 crystals that are 99.9985 at% silicon, as measured by wavelength-dispersive x-ray spectroscopy. Si24 crystals display a sharp, direct optical absorption edge at 1.51(1) eV with an absorption coefficient near the band edge that is demonstrably greater than diamond cubic silicon. Temperature-dependent electrical transport measurements confirm the removal of Na from metallic Na4Si24 to render single-crystalline semiconducting samples of Si24. These optical and electrical measurements provide insights into key parameters such as the electron donor impurity level from residual Na, reduced electron mass, and electron relaxation time. Effective Na removal on bulk length scales and the high absorption coefficient of single-crystal Si24 indicate promise for use of this material in bulk and thin film forms with potential applications in optoelectronic technologies.

Carbon-boron clathrates as a new class of sp3-bonded framework materials.

Carbon-based frameworks composed of sp3 bonding represent a class of extremely lightweight strong materials, but only diamond and a handful of other compounds exist despite numerous predictions. Thus, there remains a large gap between the number of plausible structures predicted and those synthesized. We used a chemical design principle based on boron substitution to predict and synthesize a three-dimensional carbon-boron framework in a host/guest clathrate structure. The clathrate, with composition 2Sr@B6C6, exhibits the cubic bipartite sodalite structure (type VII clathrate) composed of sp3-bonded truncated octahedral C12B12 host cages that trap Sr2+ guest cations. The clathrate not only maintains the robust nature of diamond-like sp3 bonding but also offers potential for a broad range of compounds with tunable properties through substitution of guest atoms within the cages.

Band Gap Engineering in MASnBr3 and CsSnBr3 Perovskites: Mechanistic Insights through the Application of Pressure.

Here we report on the first structural and optical high-pressure investigation of MASnBr3 (MA = [CH3NH3]+) and CsSnBr3 halide perovskites. A massive red shift of 0.4 eV for MASnBr3 and 0.2 eV for CsSnBr3 is observed within 1.3 to 1.5 GPa from absorption spectroscopy, followed by a huge blue shift of 0.3 and 0.5 eV, respectively. Synchrotron powder diffraction allowed us to correlate the upturn in the optical properties trend (onset of blue shift) with structural phase transitions from cubic to orthorhombic in MASnBr3 and from tetragonal to monoclinic for CsSnBr3. Density functional theory calculations indicate a different underlying mechanism affecting the band gap evolution with pressure, a key role of metal-halide bond lengths for CsSnBr3 and cation orientation for MASnBr3, thus showing the impact of a different A-cation on the pressure response. Finally, the investigated phases, differently from the analogous Pb-based counterparts, are robust against amorphization showing defined diffraction up to the maximum pressure used in the experiments.

Evidence for Orientational Order in Nanothreads Derived from Thiophene.

Nanothreads are one-dimensional sp3 hydrocarbons that pack within pseudohexagonal crystalline lattices. They are believed to lack long-range order along the thread axis and also lack interthread registry. Here we investigate the phase behavior of thiophene up to 35 GPa and establish a pressure-induced phase transition sequence that mirrors previous observations in low-temperature studies. Slow compression to 35 GPa results in the formation of a recoverable saturated product with a 2D monoclinic diffraction pattern along (0001) that agrees closely with atomistic simulations for single crystals of thiophene-derived nanothreads. Paradoxically, this lower-symmetry packing signals a higher degree of structural order since it must arise from constituents with a consistent azimuthal orientation about their shared axis. The simplicity of thiophene reaction pathways (with only four carbon atoms per ring) apparently yields the first nanothreads with orientational order, a striking outcome considering that a single point defect in a 1D system can disrupt long-range structural order.

Phase Transition Pathway Sampling via Swarm Intelligence and Graph Theory.

The prediction of reaction pathways for solid-solid transformations remains a key challenge. Here, we develop a pathway sampling method via swarm intelligence and graph theory and demonstrate that our pallas method is an effective tool to help understand phase transformations in solid-state systems. The method is capable of finding low-energy transition pathways between two minima without having to specify any details of the transition mechanism a priori. We benchmarked our pallas method against known phase transitions in cadmium selenide (CdSe) and silicon (Si). pallas readily identifies previously reported, low-energy phase transition pathways for the wurtzite to rock-salt transition in CdSe and reveals a novel lower-energy pathway that has not yet been observed. In addition, pallas provides detailed information that explains the complex phase transition sequence observed during the decompression of Si from high pressure. Given the efficiency to identify low-barrier-energy reaction pathways, the pallas methodology represents a promising tool for materials by design with valuable insights for novel synthesis.

Low-energy 3D sp2 carbons with versatile properties beyond graphite and graphene.

Carbon materials with full sp2-hybridized bonding, e.g. zero-dimensional (0D) fullerenes, 1D carbon nanotubes, and 2D graphene, possess outstanding and unparalleled properties, and have unique scientific and technological importance. The theoretical design and experimental exploration of other types of novel sp2 carbon allotropes, especially with 3D architectures, is always a compelling scientific theme. Here we proposed a class of low-energy 3D sp2 carbons with exceptional properties, not only possessing excellent mechanical properties such as high 3D strength, rubber-like ultra-stretchability, and negative Poisson's ratio, but also including the electronic properties of graphite-like metallicity and graphene-like Dirac cone, which are the desirable properties across a broad range of potential applications. Furthermore, a design route was suggested to access these 3D sp2 carbons by the polymerization of edge-functionalized graphene nanoribbon arrays.

Quantum Dynamics of H_{2} Trapped within Organic Clathrate Cages.

The rotational and translational dynamics of molecular hydrogen trapped within ß-hydroquinone clathrate (H_{2}@ß-HQ)-a practical example of a quantum particle trapped within an anisotropic confining potential-were investigated using inelastic neutron scattering and Raman spectroscopy. High-resolution vibrational spectra, including those collected from the VISION spectrometer at Oak Ridge National Laboratory, indicate relatively strong attractive interaction between guest and host with a strikingly large splitting of rotational energy levels compared with similar guest-host systems. Unlike related molecular systems in which confined H_{2} exhibits nearly free rotation, the behavior of H_{2}@ß-HQ is explained using a two-dimensional (2D) hindered rotor model with barrier height more than 2 times the rotational constant (-16.2 meV).