Ultrasmooth beryllium substrates for solar astronomy in extreme ultraviolet wavelengths.

The paper describes a multistage method of forming ultrasmooth substrates based on bulk beryllium. Such substrates are suggested to be used for multilayer extreme ultraviolet mirrors of spacecraft missions on solar corona investigations in the spectral range 17.1-58.4 nm. The technique for chemical nickel plating of the sample surface is described. The process parameters that provide the formation of an amorphous film with a thickness of about 100 microns are presented. The results of mechanical polishing are shown. The effective roughness of 1.3 nm is obtained, which is twice lower than one achievable for a nickel-free beryllium surface. The applicability of the ion beam figuring technique is demonstrated: the initial surface roughness of a nickel film after etching with Ar ions (Eion=200-800 eV) to a depth of 250 nm does not deteriorate. The amorphous silicon film deposition followed by ion polishing made it possible to reduce the microroughness (atomic force microscope frame 2×2 µm) to σ2×2=0.15 nm from the initial σ2×2=0.46 nm. The reflectivity of multilayer mirrors deposited on these substrates turned out to be close to the values obtained on "witnesses" (supersmooth silicon substrates). Moreover, for the Mg/MoSi2 mirror optimized for the wavelength λ=58.4 nm the values of the reflection coefficients of structures on the beryllium substrate and on the silicon "witness" were identical (about 28%).

Reflective Schmidt-Cassegrain system for large-aperture telescopes.

A reflective modification of the Schmidt-Cassegrain system was built and tested. Ultraviolet (UV) and soft x-ray applications are discussed. The system consists of a planoid mirror with an aspheric profile and prime concave and secondary convex spherical mirrors. Spherical aberration in a wide field of view and astigmatism are compensated by the aspheric profile of the planoid. The main parameters of the scheme are as follows: an entrance aperture of 180 mm, a focal ratio F/3.2, an angular resolution better than 3'' (corresponding to a pixel size of a back-side illuminated CCD), a field of view of ±1.5° (2ω=3°) and a flat image field with a diameter of 30.4 mm. Due to the absence of chromatic aberrations and wide field of view, the scheme is of considerable interest for hyperspectral instruments. In particular, the operating range of the instruments can be expanded into vacuum UV and UV regions.