A novel approach on designing ultrahigh burnup metallic TWR fuels: Upsetting the current technological limits.

Abstract: The grand challenge of "net-zero carbon" emission calls for technological breakthroughs in energy production. The traveling wave reactor (TWR) is designed to provide economical and safe nuclear power and solve imminent problems, including limited uranium resources and radiotoxicity burdens from back-end fuel reprocessing/disposal. However, qualification of fuels and materials for TWR remains challenging and it sets an "end of the road" mark on the route of R&D of this technology. In this article, a novel approach is proposed to maneuver reactor operations and utilize high-temperature transients to mitigate the challenges raised by envisioned TWR service environment. Annular U-50Zr fuel and oxidation dispersion strengthened (ODS) steels are proposed to be used instead of the current U-10Zr and HT-9 ferritic/martensitic steels. In addition, irradiation-accelerated transport of Mn and Cr to the cladding surface to form a protective oxide layer as a self-repairing mechanism was discovered and is believed capable of mitigating long-term corrosion. This work represents an attempt to disruptively overcome current technological limits in the TWR fuels. Impact statement: After the Fukushima accident in 2011, the entire nuclear industry calls for a major technological breakthrough that addresses the following three fundamental issues: (1) Reducing spent nuclear fuel reprocessing demands, (2) reducing the probability of a severe accident, and (3) reducing the energy production cost per kilowatt-hour. An inherently safe and ultralong life fast neutron reactor fuel form can be such one stone that kills the three birds. In light of the recent development findings on U-50Zr fuels, we hereby propose a disruptive, conceptual metallic fuel design that can serve the following purposes at the same time: (1) Reaching ultrahigh burnup of above 40% FIMA, (2) possessing strong inherent safety features, and (3) extending current limits on fast neutron irradiation dose to be far beyond 200 dpa. We believe that this technology will be able to bring about revolutionary changes to the nuclear industry by significantly lowering the operational costs as well as improving the reactor system safety to a large extent. Supplementary information: The online version contains supplementary material available at 10.1557/s43577-022-00420-4.

Investigation of High-Energy Ion-Irradiated MA957 Using Synchrotron Radiation under In-Situ Tension.

In this study, an MA957 oxide dispersion-strengthened (ODS) alloy was irradiated with high-energy ions in the Argonne Tandem Linac Accelerator System. Fe ions at an energy of 84 MeV bombarded MA957 tensile specimens, creating a damage region ~7.5 µm in depth; the peak damage (~40 dpa) was estimated to be at ~7 µm from the surface. Following the irradiation, in-situ high-energy X-ray diffraction measurements were performed at the Advanced Photon Source in order to study the dynamic deformation behavior of the specimens after ion irradiation damage. In-situ X-ray measurements taken during tensile testing of the ion-irradiated MA957 revealed a difference in loading behavior between the irradiated and un-irradiated regions of the specimen. At equivalent applied stresses, lower lattice strains were found in the radiation-damaged region than those in the un-irradiated region. This might be associated with a higher level of Type II stresses as a result of radiation hardening. The study has demonstrated the feasibility of combining high-energy ion radiation and high-energy synchrotron X-ray diffraction to study materials' radiation damage in a dynamic manner.

Double-helix structure in multiwall boron nitride nanotubes.

A new nanotube structural form is reported that resembles a double helix in multiwall boron nitride nanotubes (MW-BNNT) grown by a carbon-free chemical-vapor-deposition process as documented by evidence obtained by transmission electron diffraction and microscopy. The double-helix structure is found in MW-BNNTs exhibiting the same chirality in its different walls. The MW-BNNTs deviate from the structure of ideal nested coaxial cylindrical tubes. Most significantly, bright- and dark-field electron imaging reveals regular zigzag dark and bright spots on the side walls of the nanotubes. The repeating distance between the bright, or dark, spots is related to the chiral angle of the nanotube. Electron diffraction patterns recorded from individual nanotubes show additional diffraction spots belonging to the 201 zone axes, which are not allowed in a perfectly cylindrical nanotube. These additional diffraction spots become asymmetrical as smaller sections of the nanotube are probed. A series of diffraction patterns recorded along the tube axis showed that the imperfections giving rise to these spots move in a regular fashion around the circumference of the tube. It is shown that all experimental evidence supports the structure model of two helices; one is polygonal in cross section and highly crystalline and the other is circular and less ordered. It is further suggested that the double-helix structure is a result of stronger wall-wall interactions associated with the ionic bonding in boron nitride.