Quantitative Analysis of Redox-Inactive Ions by AC Voltammetry at a Polarized Interface between Two Immiscible Electrolyte Solutions.

The interface between two immiscible electrolyte solutions (ITIES) is ideally suited to detect redox-inactive ions by their ion transfer. Such electroanalysis, based on the Nernst-Donnan equation, has been predominantly performed using amperometry, cyclic voltammetry, or differential pulse voltammetry. Here, we introduce a new electroanalytical method based on alternating-current (AC) voltammetry with inherent advantages over traditional approaches such as avoidance of positive feedback iR compensation, a major issue for liquid|liquid electrochemical cells containing resistive organic media and interfacial areas in the cm2 and mm2 range. A theoretical background outlining the generation of the analytical signal is provided and based on extracting the component that depends on the Warburg impedance from the total impedance. The quantitative detection of a series of model redox-inactive tetraalkylammonium cations is demonstrated, with evidence provided of the transient adsorption of these cations at the interface during the course of ion transfer. Since ion transfer is diffusion-limited, by changing the voltage excitation frequency during AC voltammetry, the intensity of the Faradaic response can be enhanced at low frequencies (1 Hz) or made to disappear completely at higher frequencies (99 Hz). The latter produces an AC voltammogram equivalent to a "blank" measurement in the absence of analyte and is ideal for background subtraction. Therefore, major opportunities exist for the sensitive detection of ionic analyte when a "blank" measurement in the absence of analyte is impossible. This approach is particularly useful to deconvolute signals related to reversible electrochemical reactions from those due to irreversible processes, which do not give AC signals.

Effect of carbon tetrachloride on the luminol sonochemiluminescence reaction kinetics during multibubble cavitation.

The sonochemiluminescence (SCL) of luminol reaction was studied in alkaline medium using a dissolution of luminol, sodium carbonate, hydrogen peroxide and carbon tetrachloride. The presence of carbon tetrachloride enhances the SCL reaction up to allow the study of the reaction in real time using a cell phone video camera. This experimental setup allows the study of the cavitation dynamics in real time and through all the reactor, including homogeneous and heterogeneous cavitation zones. Finally, it was tested the effect of ethanol, the ionic strength and pH on the SCL.

IR and electrochemical synthesis and characterization of thin films of PEDOT grown on platinum single crystal electrodes in [EMMIM]Tf2N ionic liquid.

Thin films of PEDOT synthesized on platinum single electrodes in contact with the ionic liquid 1-ethyl-2,3-dimethylimidazolium triflimide ([EMMIM]Tf2N) were studied by cyclic voltammetry, chronoamperometry, infrared spectroscopy and atomic force microscopy. It was found that the polymer grows faster on Pt(111) than on Pt(110) or Pt(100) and that the redox reactions associated with the PEDOT p-doping process are much more reversible in [EMMIM]Tf2N than in acetonitrile. Finally, the ion exchange and charge carriers' formation during the p-doping reaction of PEDOT were studied using in situ FTIR spectroscopy.

Electrochemical and electrocatalytic properties of thin films of poly(3,4-ethylenedioxythiophene) grown on basal plane platinum electrodes.

The first part of this communication studies the electrochemical properties of thin films of poly(3,4-ethylenedioxythiophene) (PEDOT) grown on the three basal plane platinum electrodes via cyclic voltammetry, chronoamperometry, electrochemical impedance spectroscopy and in situ FTIR spectroelectrochemistry. In the second part of this work the redox reaction of 2,5-dimercapto-1,3,4-thiadiazole (DMcT) at these platinum modified electrodes is investigated via cyclic voltammetry and electrochemical impedance spectroscopy in order to elucidate the effect of some polymer properties on its electrocatalytic behavior, such as the ionic resistance, nature of the doping ion and the structure. First of all, it was found that the ionic resistance of the PEDOT films electrochemically synthesized on platinum electrodes increases in the order Pt(100) < Pt(110) < Pt(111) and the advantages of using single crystal platinum electrodes coated with PEDOT for the IR study of individual mobile species flux and the evolution of charge carriers during the reduction process of p-doped PEDOT were proven. On the other hand, it was found that compact, rigid and low resistance PEDOT films show higher standard charge transfer rates for the DMcT redox reaction than those that have a more porous structure and higher ionic resistance. Finally, PEDOT films doped with alkaline ions are more electrocatalytic for the oxidation process of the protonated form of DMcT.

Voltammetry of basal plane platinum electrodes in acetonitrile electrolytes: effect of the presence of water.

The first part of this report studies the electrochemical properties of single-crystal platinum electrodes in acetonitrile electrolytes by means of cyclic voltammetry. Potential difference infrared spectroscopy in conjunction with linear voltammetry was used to obtain a molecular-level picture of this interface. The second part of this report studies the hydrogen evolution and the hydrogen oxidation reactions on the three low-index faces of Pt electrodes in acetonitrile electrolytes. The data (CVs and IR spectra) strongly suggest that acetonitrile and CN(-) molecules are adsorbed on single-crystal platinum electrodes in the range of -1.5 to 0.3 V versus Ag/AgCl. Those species block part of the adsorption sites for hydrogen adatoms, and they decompose on the surface in the presence of water. The nature of the cation and the presence of water strongly affect the onset of acetonitrile electrolysis and the kinetics and stability of the adsorbed species on the electrode. Finally, the hydrogen evolution and the hydrogen oxidation reactions on platinum single-crystal surfaces in acetonitrile electrolytes are strongly affected by the surface-energy state of Pt electrodes.

Electrochemical properties of thin films of polythiophene polymerized on Basal plane platinum electrodes in nonaqueous media.

In this paper the electrochemical properties of polythiophene thin films synthesized on single-crystal platinum electrodes are studied. It was found that the electrochemical properties, ion transport kinetics, and morphology of the polythiophene films depend on the surface orientation of the single-crystal platinum electrode used for their electropolymerization. Different oxidation levels, regarded as neutral, polaron, bipolaron, and metallic states, are usually found in conjugated heterocyclic polymers. However, the transitions between the different oxidation levels were never clearly observed in cyclic voltammetry. Instead the voltammograms usually show broad oxidation and reduction peaks with some shoulders. With the use of single-crystal platinum electrodes, it was found that polythiophene has a well-defined redox process at low potential, not observed before, possibly related to the conversion from the neutral state to polarons. On the other hand, two well-defined consecutive steps were found during the ion exchange reaction of thin films of polymer, both characterized by nucleation kinetics. This is the first report of two consecutive nucleation processes during the ion exchange process of a conducting polymer. The results presented here could further illuminate the mechanism in which the electron is transported in organic semiconductor materials.

Polymerization of polypyrrole on single crystal platinum electrodes: a surface structure sensitive reaction.

This communication shows experimental results that clearly demonstrated the influence of the crystalline surface structure of the platinum electrode on the early stages of the electropolymerization of pyrrole in aqueous media. The platinum surface structure determines adhesion, coverage level, charge transfer properties as well as bulk properties of the synthesized film like morphology and the ion exchange kinetics during its reduction and oxidation. It is proven that the Pt(110) an Pt(111) surfaces are more suitable for obtain polypyrrole films with higher conductivity and charge-storage capacity than the Pt(100) surface.