Fragmentation dynamics of the doubly charged aniline: the source of kinetically excited CnH3+ ions.

The goals of this work are to attempt to decipher if an aniline dication can isomerize to a picoline dication in a given astrochemical environment and if the dissociation of such dications could be a source of kinetically hot fragment ions, some of which could be of significance in the interstellar medium. Toward this purpose, the VUV-induced dication dissociation was investigated experimentally using ion-ion coincidence and computationally by optimizing various pathways. Contrary to previous reports, we show here that the dication of aniline is structurally too weak to retain its ring structure while following the dissociation pathways. A fragile open ring structure could lead to all the experimentally observed pathways of noticeable intensity. The significance of this, especially in terms of molecular dynamics, can be assessed by the fact that all the transformations were facilitated by specific hydrogen migration. A clear selectivity is seen where the dication of aniline was found to prefer a rearrangement of hydrogen within the ring rather than transferring from nitrogen to the ring, which is conventionally expected and has to do with the charge state and charge localization.

Engineering a recombinant chitinase from the marine bacterium Bacillus aryabhattai with targeted activity on insoluble crystalline chitin for chitin oligomer production.

Chitin, an abundant polysaccharide in India, is primary by-product of the seafood industry. Efficiently converting chitin into valuable products is crucial. Chitinase, transforms chitin into chitin oligomers, holds significant industrial potential. However, the crystalline and insoluble nature of chitin makes the conversion process challenging. In this study, a recombinant chitinase from marine bacteria Bacillus aryabhattai was developed. This enzyme exhibits activity against insoluble chitin substrates, chitin powder and flakes. The chitinase gene was cloned into the pET 23a plasmid and transformed into E. coli Rosetta pLysS. IPTG induction was employed to express chitinase, and purification using Ni-NTA affinity chromatography. Optimal chitinase activity against colloidal chitin was observed in Tris buffer at pH 8, temperature 55°C, with the presence of 400 mM sodium chloride. Enzyme kinetics studies revealed a Vmax of 2000 µmole min-1 and a Km of 4.6 mg mL-1. The highest chitinase activity against insoluble chitin powder and flakes reached 875 U mg-1 and 625 U mg-1, respectively. The chitinase demonstrated inhibition of Candida albicans, Fusarium solani, and Penicillium chrysogenum growth. Thin Layer Chromatography (TLC) and LC-MS analysis confirmed the production of chitin oligomers, chitin trimer, tetramer, pentamer, and hexamer, from chitin powder and flakes using recombinant chitinase.

QSAR and Molecular Docking Studies of Pyrimidine-Coumarin-Triazole Conjugates as Prospective Anti-Breast Cancer Agents.

Cancer is a life-threatening disease and is the second leading cause of death worldwide. Although many drugs are available for the treatment of cancer, survival outcomes are very low. Hence, rapid development of newer anticancer agents is a prime focus of the medicinal chemistry community. Since the recent past, computational methods have been extensively employed for accelerating the drug discovery process. In view of this, in the present study we performed 2D-QSAR (Quantitative Structure-Activity Relationship) analysis of a series of compounds reported with potential anticancer activity against breast cancer cell line MCF7 using QSARINS software. The best four models exhibited a r2 value of 0.99. From the generated QSAR equations, a series of pyrimidine-coumarin-triazole conjugates were designed and their MCF7 cell inhibitory activities were predicted using the QSAR equations. Furthermore, molecular docking studies were carried out for the designed compounds using AutoDock Vina against dihydrofolate reductase (DHFR), colchicine and vinblastine binding sites of tubulin, the key enzyme targets in breast cancer. The most active compounds identified through these computational studies will be useful for synthesizing and testing them as prospective novel anti-breast cancer agents.

A marine chitinase from Bacillus aryabhattai with antifungal activity and broad specificity toward crystalline chitin degradation.

Chitinases convert chitin into chitin oligomers and are also known antifungal agents. Chitin oligomers have numerous industrial applications. However, chitin's crystalline nature requires pretreatment before breakdown into oligomers. In the study, a novel marine bacterium Bacillus aryabhattai is isolated from the Arabian Sea. Bacterial growth in different crystalline chitin substrates like chitin powder, chitin flakes, and colloidal chitin confirmed the chitinase presence in bacterium could act upon insoluble crystalline chitin with the fractional release of oligomers. The domain architecture analysis of the chitinase confirmed the presence of two N-terminal LysM domains which help enzyme action on crystalline chitin. Statistical optimization of media and Process parameters revealed glycerol, yeast extract, magnesium chloride, and manganese sulfate as significant media components along with colloidal chitin. The optimum process parameters such as pH 7, temperature 40 °C, inoculum size 12.5% (v/v), and inoculum age 20 hours enhanced the specific enzyme activity to ±146.2 U/mL, ±114.9 U/mL and ±175.4 U/mL against chitin powder, chitin flakes and colloidal chitin respectively, which is five to six times higher than basal level activity. The antifungal activity of chitinase against plant pathogenic fungi like Candida albicans and Fusarium oxysporum revealed a zone of inhibition with 14 mm diameter.

Emerging desalination technologies for water treatment: a critical review.

In this paper, a review of emerging desalination technologies is presented. Several technologies for desalination of municipal and industrial wastewater have been proposed and evaluated, but only certain technologies have been commercialized or are close to commercialization. This review consists of membrane-based, thermal-based and alternative technologies. Membranes based on incorporation of nanoparticles, carbon nanotubes or graphene-based ones show promise as innovative desalination technologies with superior performance in terms of water permeability and salt rejection. However, only nanocomposite membranes have been commercialized while others are still under fundamental developmental stages. Among the thermal-based technologies, membrane distillation and adsorption desalination show the most promise for enhanced performance with the availability of a waste heat source. Several alternative technologies have also been developed recently; those based on capacitive deionization have shown considerable improvements in their salt removal capacity and feed water recovery. In the same category, microbial desalination cells have been shown to desalinate high salinity water without any external energy source, but to date, scale up of the process has not been methodically evaluated. In this paper, advantages and drawbacks of each technology is discussed along with a comparison of performance, water quality and energy consumption.

Energy minimization strategies and renewable energy utilization for desalination: a review.

Energy is a significant cost in the economics of desalinating waters, but water scarcity is driving the rapid expansion in global installed capacity of desalination facilities. Conventional fossil fuels have been utilized as their main energy source, but recent concerns over greenhouse gas (GHG) emissions have promoted global development and implementation of energy minimization strategies and cleaner energy supplies. In this paper, a comprehensive review of energy minimization strategies for membrane-based desalination processes and utilization of lower GHG emission renewable energy resources is presented. The review covers the utilization of energy efficient design, high efficiency pumping, energy recovery devices, advanced membrane materials (nanocomposite, nanotube, and biomimetic), innovative technologies (forward osmosis, ion concentration polarization, and capacitive deionization), and renewable energy resources (solar, wind, and geothermal). Utilization of energy efficient design combined with high efficiency pumping and energy recovery devices have proven effective in full-scale applications. Integration of advanced membrane materials and innovative technologies for desalination show promise but lack long-term operational data. Implementation of renewable energy resources depends upon geography-specific abundance, a feasible means of handling renewable energy power intermittency, and solving technological and economic scale-up and permitting issues.

Direct observation of bacterial deposition onto clean and organic-fouled polyamide membranes.

Nanofiltration (NF) and reverse osmosis (RO) membranes are commonly applied to produce highly purified water from municipal wastewater effluents. In these applications, biofouling limits overall process performance and increases the cost of operation. Initial bacteria adhesion onto a membrane surface is a critical early step in the overall process of membrane biofouling. However, adsorption of effluent organic matter onto the membrane may precede bacterial deposition and change membrane surface properties. Herein we employed direct microscopic observation to elucidate mechanisms governing bacterial cell deposition onto clean and organic-fouled NF and RO membranes. Bovine serum albumin (BSA) and alginic acid (AA) were used as models for protein and polysaccharide rich organic matter in secondary wastewater effluents. In all experiments, organic fouling increased membrane hydraulic resistance and salt rejection, in addition to interfacial hydrophilicity and roughness. Even though surface hydrophilicity increased, the rougher surfaces presented by organic-fouled membranes produced nano-scale features that promoted localized bacterial deposition. An extended DLVO analysis of bacterial cells and membrane surface properties suggested that bacterial deposition correlated most strongly with the Lewis acid-base free energy of adhesion and root mean square (RMS) roughness, whereas van der Waals and electrostatic free energies were weakly correlated. This was true for both clean and organic-fouled membranes. Bacterial deposition rates were clearly influenced by an antagonistic interplay between macroscopic surface hydrophilicity and nano-scale surface roughness.