Removal and recovery of cobalt from aqueous solutions by adsorption using low cost lignocellulosic biomass--coir pith.

The applicability of low-cost lignocellulosic biosorbent-coir pith, for removal of cobalt (II) from aqueous solutions using batch adsorption studies has been explored herein. Adsorption characteristics of coir pith were investigated systematically by varying the experimental parameters such as, solution pH, initial metal ion concentration, contact time, adsorbent dose and temperature. The studies revealed that optimum adsorption of cobalt onto coir pith occurred in the pH range of 4.0 - 7.0. Sorption kinetics of cobalt was found to be quite rapid under ambient conditions and the process followed second-order kinetics. The experimental data have been analyzed using non-linearized forms of Langmuir, Freundlich and Redlich-Peterson adsorption isotherms for mathematical description of the process. Desorption studies showed that the quantitative recovery of Co (II) from the spent coir pith was achieved by using 0.5 N HCl. The suitability of this adsorbent for real situation has been observed, when complete removal of cobalt from nuclear power plant coolant water was obtained. The present studies successfully demonstrated the use of coir pith as an efficient adsorbent material for removal of cobalt from aqueous solutions.

Engineering a lignocellulosic biosorbent--coir pith for removal of cesium from aqueous solutions: equilibrium and kinetic studies.

A novel method of engineering lignocellulosic biosorbent- coir pith (CP) by incorporation of nickel hexacyanoferrate (NiHCF), also referred to as Prussian blue analogue (PBA) inside its porous matrix is reported. Structural characterization confirmed the successful synthesis of NiHCF in the coir pith matrix. Sorption capacity of coir pith (CP) before and after loading of NiHCF was investigated for cesium (Cs) in batch equilibrium studies. Kinetic studies showed that the sorption process was rapid and saturation was attained within 30 min. The applicability of non linear Langmuir, Freundlich and Redlich Peterson isotherms was examined for the experimental data. The present studies revealed that there was nearly 100% increase in the sorption capacity of CP after its surface modification with NiHCF. Owing to its low cost, fast sorption kinetics and high uptake capacity, coir pith loaded with NiHCF (CP-NiHCF) seems to be one of the most promising biosorbents for recovery of cesium from liquid nuclear wastes.

Quantitative evaluation of europium in blue ballpoint pen inks/offset printing inks tagged with europium thenoyltrifluoroacetonate by spectrofluorometry and ICP-AES.

Tagging of writing/printing inks with suitable inorganic taggants such as rare-earth chelates has the potential to help document examiners identify fraud in sensitive written/printed documents. Selection of rare-earth chelates as taggants primarily depends on the satisfactory sensitivity of analytical determination and the absence of the taggants in normal varieties of inks used for document writing/printing. Spectrofluorometric determination of trace amounts of europium in blue ballpoint pen inks and offset printing inks tagged with europium thenoyltrifluoroacetonate was carried out with sodium tungstate solution. Sodium tungstate acts as a specific reagent that enhances the fluorescence intensity of the Eu3+ ion. The excitation and emission wavelengths are 270 nm and 605 nm respectively. The results were compared with the data obtained with ICP-AES. Satisfactory recoveries were observed with precision better than 5% RSD and comparable accuracy. Under the optimized experimental conditions, detection limits and quantitation limits were determined. The detection limits obtained by spectrofluorometry and ICP-AES were 0.01 microg/mL and 0.006 microg/mL respectively whereas the limits of quantitation were about 0.03 microg/mL and 0.018 microg/mL respectively. The spectrofluorometric method is rapid, selective, sensitive and accurate for the determination of europium in blue ballpoint pen ink and offset printing inks and may be suitable for application in the examination of sensitive documents to aid in document related crime investigation. The advantages and limitations of the tagging approach and proposed analytical techniques are discussed.

Esterified coir pith as an adsorbent for the removal of Co(II) from aqueous solution.

Coir pith was chemically modified for the adsorption of cobalt(II) ions from aqueous solution. Chemical modification was done by esterification using succinic anhydride followed by activation with NaHCO(3) in order to improve the adsorption of Co(II). Adsorptive removal of Co(II) from aqueous solution onto modified coir pith was evaluated in batch studies under varying conditions of agitation time and metal ion concentration to assess the kinetic and equilibrium parameters. A pseudo-second-order kinetic model fitted well for the sorption of Co(II) onto modified coir pith. Sorption kinetics showed that the loading of Co(II) by this material was quite fast under ambient conditions. The Langmuir and Freundlich equilibrium isotherm models provided excellent fits for the adsorption data, with R(2) of 0.99 and 0.98, respectively. After esterification, the maximum Co(II) sorption loading Q(0); was greatly improved. It is evident that chemically modified adsorbent exhibits better Co(II) removal capability than raw adsorbent suggesting that surface modification of the adsorbent generates more adsorption sites on its solid surface for metal adsorption. A complete recovery of the adsorbed metal ions from the spent adsorbent was achieved by using 1.0N HCl.

Production and separation of no-carrier-added radioactive tracers of yttrium, strontium and rubidium from heavy-ion irradiated germanium target: applicability to the standardization of a separation technique for production of positron-emitting radionuclide 86Y.

Among various positron-emitting radionuclides, certain radioisotopes of Y, Sr and Rb have important applications in diagnostic and therapeutic nuclear medicine. In the present work, an attempt has been made to produce some of those radioisotopes by irradiating a natural Ge-target material with heavy-ion oxygen ((16)O(+6)) projectiles. An effective radiochemical separation scheme was developed to isolate Y, Sr and Rb radiotracers from the irradiated Ge-matrix in no-carrier-added form with a view to applying those radiotracers for standardization of a technique for the radiochemical separation of Y from natural Sr target. The standardized separation technique could be utilized for the production of the positron-emitting (86)Y from an enriched (86)Sr target irradiated at a medical cyclotron.

Analysis of Indian blue ballpoint pen inks tagged with rare-earth thenoyltrifluoroacetonates by inductively coupled plasma-mass spectrometry and instrumental neutron activation analysis.

Characterization and assessment of inks on sensitive documents for absolute/relative age determination is the challenging forensic problem in spite of practical difficulties. Tagging of ballpoint pen ink with suitable taggant(s) is a unique method to come out with definitive inferences on the detection of forgery in documents written with ballpoint pens. Selection of a proper taggant primarily depends on sensitivity of analytical determination and their absence in normal varieties of ink used for document writing. Rare-earth elements, from all technical considerations can be potential taggant(s) for inks. To ensure more compatibility with ink, 13 rare-earth thenoyltrifluoroacetonate chelates were prepared and characterized. The ballpoint pen inks were tagged with rare-earth thenoyltrifluoroacetonate chelates individually at about 1-100 ppm level depending on sensitivity of element under suitable optimized experimental conditions and instrumental sensitivity. Aliquots of such tagged ink having varying amounts of taggants were analyzed by ICP-MS and INAA. Satisfactory recoveries and a good linear relationship of intensity (signal) against concentrations/amounts were observed. Under the optimized experimental conditions, the detection limits were worked out. This study of tagging metal ions in combination with ICP-MS and NAA as an analytical tool can allow to draw various combination options based on different rare-earth chelates as suitable materials for tagging of ballpoint pen inks for absolute/relative age determination to aid in document related crime examination. The advantages and limitations of proposed analytical techniques are discussed.

Uranium removal from aqueous solution by coir pith: equilibrium and kinetic studies.

Basic aspects of uranium adsorption by coir pith have been investigated by batch equilibration. The influence of different experimental parameters such as final solution pH, adsorbent dosage, sorption time, temperature and various concentrations of uranium on uptake were evaluated. Maximum uranium adsorption was observed in the pH range 4.0-6.0. The Freundlich and Langmuir adsorption models were used for the mathematical description of the adsorption equilibrium. The equilibrium data fitted well to both the equilibrium models in the studied concentration range of uranium (200-800 mg/l) and temperatures (305-336 K). The coir pith exhibited the highest uptake capacity for uranium at 317 K, at the final solution pH value of 4.3 and at the initial uranium concentration of 800 mg/l. The kinetics of the adsorption process followed a second-order adsorption. The adsorbent used proved to be suitable for removal of uranium from aqueous solutions. 0.2 N HCl was effective in uranium desorption. The results indicated that the naturally abundant coir pith of otherwise nuisance value exhibited considerable potential for application in removal of uranium from aqueous solution.